Weiguang Kong

发表

Approaching optimal hole transport layers by an organic monomolecular strategy for efficient inverted perovskite solar cells

Changwen Liu, Haichao Zhang, Weijun Wang, 2020 .

Functionalized SnO2 films by using EDTA-2 M for high efficiency perovskite solar cells with efficiency over 23%

Hongwei Wang, G. Fu, Jingwei Xue, 2022, Chemical Engineering Journal.

Organic Monomolecular Layers Enable Energy-Level Matching for Efficient Hole Transporting Layer Free Inverted Perovskite Solar Cells.

Abbas Amini, J. Miao, Baomin Xu, 2019, ACS nano.

Fabricating High‐Efficient Blade‐Coated Perovskite Solar Cells under Ambient Condition Using Lead Acetate Trihydrate

Abbas Amini, Baomin Xu, Jianbo Wang, 2018 .

Multifunctional molecular incorporation boosting the efficiency and stability of the inverted perovskite solar cells

G. Fu, Junlei Tao, Shaopeng Yang, 2021 .

Facile Physical Modifications of Polymer Hole Transporting Layers for Efficient and Reproducible Perovskite Solar Cells with Fill Factor Exceeding 80%

G. Fu, Kang Chen, Junlei Tao, 2020 .

Bifunctional Ultra-thin PCBM Enables Passivated Trap States and Cascaded Energy Level toward Efficient Inverted Perovskite Solar Cells.

Abbas Amini, Shuti Li, Weidong Song, 2020, ACS applied materials & interfaces.

Simplified Compact Perovskite Solar Cells with Efficiency of 19.6% via Interface Engineering

Changwen Liu, Haichao Zhang, Chun Cheng, 2020, ENERGY & ENVIRONMENTAL MATERIALS.

Improvement on the performance of perovskite solar cells by doctor-blade coating under ambient condition with hole-transporting material optimization

Xingzhu Wang, Baomin Xu, Chun Cheng, 2019, Journal of Energy Chemistry.

Enhanced stability and photovoltage for inverted perovskite solar cells via precursor engineering

A. Jen, Baomin Xu, Changwen Liu, 2019, Journal of Materials Chemistry A.

Binary organic spacer-based quasi-two-dimensional perovskites with preferable vertical orientation and efficient charge transport for high-performance planar solar cells

Baomin Xu, Chun Cheng, Luozheng Zhang, 2019, Journal of Materials Chemistry A.

Polymer Assisted Small Molecule Hole Transport Layers Toward Highly Efficient Inverted Perovskite Solar Cells

Xingzhu Wang, Baomin Xu, Changwen Liu, 2018, Solar RRL.

Crystallization manipulation and morphology evolution for highly efficient perovskite solar cell fabrication via hydration water induced intermediate phase formation under heat assisted spin-coating

Guipeng Yu, Chun-yue Pan, Baomin Xu, 2018 .

Additive Engineering for Efficient and Stable MAPbI3-Perovskite Solar Cells with an Efficiency of over 21.

Hongwei Wang, G. Fu, Jingwei Xue, 2021, ACS applied materials & interfaces.

Optical characterizations of the surface states in hybrid lead-halide perovskites.

T. Ding, Huizhen Wu, G. Bi, 2016, Physical chemistry chemical physics : PCCP.

Boosting the performance of MA-free inverted perovskite solar cells via multifunctional ion liquid

Xingfu Wang, Shuti Li, Yulan Huang, 2021, Journal of Materials Chemistry A.

Ionic liquid coated zerovalent manganese nanoparticles with stabilized and enhanced peroxidase-like catalytic activity for colorimetric detection of hydrogen peroxide

A. Hayat, N. Muhammad, Changping Yang, 2020, Materials Research Express.

Optical properties of pH-sensitive carbon-dots with different modifications

Bingpo Zhang, Huizhen Wu, Ruifeng Li, 2014 .

Enhanced efficiency in perovskite solar cells by eliminating the electron contact barrier between the metal electrode and electron transport layer

G. Fu, Kang Chen, Junlei Tao, 2019, Journal of Materials Chemistry A.

Back-Contact Ionic Compound Engineering Boosting the Efficiency and Stability of Blade-Coated Perovskite Solar Cells.

H. Zhong, Mingxuan Liu, Guangsheng Fu, 2022, ACS applied materials & interfaces.

Liberating Researchers from the Glovebox: A Universal Thermal Radiation Protocol Toward Efficient Fully Air-Processed Perovskite Solar Cells

Abbas Amini, Baomin Xu, Changwen Liu, 2019, Solar RRL.

Precursor formula engineering enabling high quality solution processed C60 films for efficient and stable inverted perovskite solar cells

H. Zhong, Junlei Tao, Shaopeng Yang, 2022, Chemical Engineering Journal.

Approaching the Most Economic Preparation of Hole Transport Layer by Organic Monomolecular Strategy for Efficient Inverted Perovskite Solar Cells

Changwen Liu, Haichao Zhang, Weijun Wang, 2020 .

Oxygen Intercalation Induced by Photocatalysis on the Surface of Hybrid Lead Halide Perovskites

A. Rahimi‐Iman, Huizhen Wu, G. Bi, 2016 .

Broadening the light absorption range via PBDB-T to improve the power conversion efficiency in ternary organic solar cells

Shahua Huang, Shaopeng Yang, Weiguang Kong, 2020 .

A facile strategy for enhanced performance of inverted organic solar cells based on low-temperature solution-processed SnO2 electron transport layer

Shahua Huang, G. Fu, N. Ali, 2020 .

Plasmon enhanced fluorescence from quaternary CuInZnS quantum dots

Bingpo Zhang, Huizhen Wu, Feifei Wu, 2015 .

Surface Treatment of the Perovskite Via Self-Assembled Dipole Layer Enabling Enhanced Efficiency and Stability for Perovskite Solar Cells

H. Zhong, Guangsheng Fu, Shaopeng Yang, 2022, SSRN Electronic Journal.

Suppressing the crystallographic disorders induced by excess PbI2 to achieve trade-off between efficiency and stability for PbI2-rich perovskite solar cells

H. Zhong, Guangsheng Fu, Shaopeng Yang, 2022, Nano Energy.

Efficiency and stability enhancement of perovskite solar cells by introducing CsPbI3 quantum dots as an interface engineering layer

Weiguang Kong, Chang Liu, Xingzhong Zhao, 2018, NPG Asia Materials.

Cross-linking of polymer and ionic liquid as high-performance gel electrolyte for flexible solid-state supercapacitors

Hui Pan, X. Zhong, Lujie Cao, 2017 .

Phonon blocking by two dimensional electron gas in polar CdTe/PbTe heterojunctions

He Zhu, Bingpo Zhang, Huizhen Wu, 2014 .

Polyoxometalate‐Derived Hexagonal Molybdenum Nitrides (MXenes) Supported by Boron, Nitrogen Codoped Carbon Nanotubes for Efficient Electrochemical Hydrogen Evolution from Seawater

Zikang Tang, Abbas Amini, Shuangpeng Wang, 2018, Advanced Functional Materials.

Efficient coupling of a hierarchical V2O5@Ni3S2 hybrid nanoarray for pseudocapacitors and hydrogen production

Ming Yang, Mingyang Yang, J. Chai, 2017 .

Electrocatalytic Hydrogen Production: Polyoxometalate-Derived Hexagonal Molybdenum Nitrides (MXenes) Supported by Boron, Nitrogen Codoped Carbon Nanotubes for Efficient Electrochemical Hydrogen Evolution from Seawater (Adv. Funct. Mater. 8/2019)

Zikang Tang, Abbas Amini, Shuangpeng Wang, 2019, Advanced Functional Materials.

Controllable synthesis and growth mechanism of dual size distributed PbSe quantum dots

Huizhen Wu, W. Fang, Ruifeng Li, 2015 .

Characterization of an abnormal photoluminescence behavior upon crystal-phase transition of perovskite CH3NH3PbI3.

Huizhen Wu, Arash Rahimi-Iman, Weiguang Kong, 2015, Physical chemistry chemical physics : PCCP.

Improving the efficiency of organic photovoltaic cells by introducing an ultrathin modification layer with a strong dipole moment

Li Han, G. Fu, Shaopeng Yang, 2012 .

A facile strategy to adjust SnO2/Perovskite interfacial properties for high efficiency perovskite solar cells

Jingwei Xue, Guangsheng Fu, Junlei Tao, 2022, Journal of Materials Chemistry C.

An overview of the decompositions in organo-metal halide perovskites and shielding with 2-dimensional perovskites

S. Muqthiar Ali, B. Zhu, Huizhen Wu, 2019, Renewable and Sustainable Energy Reviews.

Improved Morphology and Interfacial Contact of PBDB-T:N2200-Based All-Polymer Solar Cells by Using the Solvent Additive p-Anisaldehyde

Shahua Huang, G. Fu, Xiaohui Zhao, 2020 .

Liberating Researchers from the Glovebox: A Universal Thermal Radiation Protocol Toward Efficient Fully Air‐Processed Perovskite Solar Cells (Solar RRL 5∕2019)

Abbas Amini, Baomin Xu, Changwen Liu, 2019, Solar RRL.