Shu-tong Yang

发表

Analytical Solution for Fracture Analysis of CFRP Sheet–Strengthened Cracked Concrete Beams

Jian‐Jun Zheng, Xiaozhi Hu, Zhimin Wu, 2010 .

Influence of local fracture energy distribution on maximum fracture load of three-point-bending notched concrete beams

Zhimin Wu, X. Hu, Shu-tong Yang, 2011 .

Analytical solution for the pull-out response of FRP rods embedded in steel tubes filled with cement grout

Jian‐Jun Zheng, Xiaozhi Hu, Zhimin Wu, 2010 .

Study on Local Fracture Energy Distribution in Reinforced Concrete Beams

Shu-tong Yang, 2014 .

Flexural Behavior of Fire-Damaged Prefabricated RC Hollow Slabs Strengthened with CFRP versus TRM

Kun Dong, Shu-tong Yang, Zheng-ang Sui, 2020, Materials.

Study on fracture properties of alkali-activated slag seawater coral aggregate concrete

Weiying Xu, Shu-tong Yang, Chengji Xu, 2019, Construction and Building Materials.

An Analytical Model to Predict the Push-Out Capacity of Mortar from Rock Block

Shu-tong Yang, Shuqing Yang, 2011 .

Determination of boundary effect on shear fracture energy at steel bar–concrete interface

G. Fan, D. Du, Shu-tong Yang, 2016 .

Analytical Method for Pullout of Anchor from Anchor–Mortar–Concrete Anchorage System due to Shear Failure of Mortar

Jian‐Jun Zheng, Xiaozhi Hu, Zhimin Wu, 2007 .

Mechanical properties of alkali-activated slag concrete mixed by seawater and sea sand

Shu-tong Yang, Rui Li, Jinjin Xu, 2019, Construction and Building Materials.

Properties of self-compacting lightweight concrete containing recycled plastic particles

Yao Tong, Xiaosong Liu, Shu-tong Yang, 2015 .

Push-out test to study bond properties of mortar–concrete interface

Shutong Yang, Weiping Huang, Yalin Liu, 2014 .

Study on bond performance between FRP bars and seawater coral aggregate concrete

G. Fan, Yang Liu, Chao Yang, 2018, Construction and Building Materials.

Properties of Alkali-Resistant Glass Fiber Reinforced Coral Aggregate Concrete

Kun Dong, Miao-Zhen Yu, Shu-tong Yang, 2020, Materials.

Determination of Fracture Parameters of Seawater Sea Sand Concrete Based on Maximum Fracture Load

G. Fan, Shu-tong Yang, Jinjin Xu, 2020 .

An analytical approach to predict fracture parameters of coral aggregate concrete immersed in seawater

J. Yao, Miao-Zhen Yu, Shu-tong Yang, 2019, Ocean Engineering.

Comparison of boundary and size effect models based on new developments

Shutong Yang, Junfeng Guan, Xiaozhi Hu, 2017 .

Fracture Model for Predicting Tensile Strength and Fracture Toughness of Concrete Under Different Loading Rates

Shu-tong Yang, M. Wang, Shutong Liu, 2023, SSRN Electronic Journal.

A closed-form fracture model to predict tensile strength and fracture toughness of alkali-activated slag and fly ash blended concrete made by sea sand and recycled coarse aggregate

Zhongke Sun, Qianhui Guo, Shu-tong Yang, 2021 .

Prediction of interfacial tensile bond strength in 3D printed concrete based on a closed-form fracture model

Shidong Cheng, Shu-tong Yang, M. Wang, 2023, Journal of Building Engineering.

A predictive solution for fracture modeling of alkali-activated slag and fly ash blended sea sand concrete after exposure to elevated temperature

Kun Dong, Zhongke Sun, Shu-tong Yang, 2022, Construction and Building Materials.

A predictive model to determine tensile strength and fracture toughness of 3D printed fiber reinforced concrete loaded in different directions

T. Lan, Shu-tong Yang, M. Wang, 2022, Theoretical and Applied Fracture Mechanics.

An analytical model to predict the effective fracture toughness of concrete for three-point bending notched beams

Shutong Yang, Xiaozhi Hu, Jianjun Zheng, 2006 .

Closed-form solution for predicting tensile strength and fracture toughness of ultra-high-performance concrete

Z. Ren, Shu-tong Yang, Tian Lan, 2022, Cement and Concrete Composites.

Correlation between Cohesive Crack-Tip Local Fracture Energy and Peak Load in Mortar Beams

Xiaozhi Hu, Yalin Liu, Shu-tong Yang, 2014 .

Optimization design of ultrahigh-performance concrete based on interaction analysis of multiple factors

Shu-tong Yang, M. Hang, Junhao Wang, 2021, Case Studies in Construction Materials.

Bond performance between NSM FRP rods and concrete using ECC as bonding materials

Shiwei Wang, Shu-tong Yang, Yu Tao, 2015 .

Theoretical analysis on pullout of anchor from anchor-mortar-concrete anchorage system

Jian‐Jun Zheng, Xiaozhi Hu, Zhimin Wu, 2008 .

Mechanical behavior of different types of concrete under multiaxial tension–compression

Huai-shuai Shang, H. Shang, Shu-tong Yang, 2014 .

The optimum design of particle tuned mass damper for structural seismic control considering soil-structure interaction

Peizhen Li, Zheng Lu, Shutong Liu, 2023, Journal of Vibration and Control.

Comparative study on seismic performance of structure with TMD and particle TMD considering SSI effects

Peizhen Li, Shutong Liu, Haochen Li, 2023, Journal of Building Engineering.

Analytical Method for Failure of Anchor-Grout-Concrete Anchorage due to Concrete Cone Failure and Interfacial Debonding

Shutong Yang, Xiaozhi Hu, Zhimin Wu, 2009 .

Modelling fracture process zone width and length for quasi-brittle fracture of rock, concrete and ceramics

Qingbin Li, Xiaozhi Hu, Zhimin Wu, 2022, Engineering Fracture Mechanics.

Effects of resin pre-coating treatment and fibre reinforcement on adhesive bonding between CFRP sheet and concrete

Shu-tong Yang, Chang Liu, Mingqi Xu, 2022, Composite Structures.

A predictive model for determining shear strength and shear fracture energy of FRP bars in alkali-activated slag seawater coral aggregate concrete

Z. Ren, Shu-tong Yang, Zhong-Lei Sun, 2022, Journal of Building Engineering.

Determination of boundary effect on mode II fracture energy of FRP sheet-to-concrete bonded joints

Yang Liu, Shu-tong Yang, Xiaoliang Xu, 2017 .