H. G. Suzuki

发表

Characteristics of Hot Ductility in Steels Subjected to the Melting and Solidification

S. Nishimura, H. G. Suzuki, S. Yamaguchi, 1982 .

Improvement of Hot Ductility of Continuously Cast Carbon Steels

S. Nishimura, H. G. Suzuki, Yasushi Nakamura, 1984 .

Precipitation characteristics of Cu–15Cr–0·15Zr in situ composite

H. G. Suzuki, D.L. Zhang, K. Mihara, 2000 .

Hot Ductility in Steels in the Temperature Range between 900 and 600°C

Yasushi Nakamura, Satoshi Nishimura, S. Nishimura, 1981 .

Effect of Microstructure and Impurity Content on Microcrack Initiation and Extension Properties of Ti-6Al-4V Alloys

T. Kishi, H. G. Suzuki, T. Horiya, 1989 .

Effect of Sn Addition on the Mechanical and Electrical Properties of Cu-15%Cr In-Situ Composites

Jusheng Ma, H. G. Suzuki, K. Mihara, 2003 .

Preparation and characterization of as-rolled AZ31 magnesium alloy sheets

Boping Zhang, Hailong Zhang, H. G. Suzuki, 2007 .

Solidification Structure and Segregation in Cast Ingots of Titanium Alloy Produced by Vacuum Arc Consumable Electrode Method

Hiroshi Hayakawa, H. Hayakawa, T. Udagawa, 1991 .

EFFECT OF ALLOYING CONTENT, PHASE AND MAGNETIC TRANSFORMATION ON THE SHAPE MEMORY EFFECT OF Fe-Mn-Si ALLOYS.

M. Murakami, S. Matsuda, H. G. Suzuki, 1986 .

Effect of Si on the microstructure and mechanical properties of as drawn Cu–15Cr in situ composites

S. Sun, H. G. Suzuki, S. Sakai, 2001 .

Formation Mechanism and Prevention Method of Facial Cracks of Continuously Cast Steel Slabs Containing Boron

Tooru Inoue, H. G. Suzuki, Kōichi Yamamoto, 1987 .

Embrittlement of Steels Occurring in the Temperature Range from 1 000 to 600°C

Yasushi Nakamura, Satoshi Nishimura, S. Nishimura, 1984 .

Strain Rate Dependence of Cu Embrittlement in Steels

H. G. Suzuki, 1997 .

Mobility of metalloid atoms in iron-base amorphous metals investigated with Auger electron spectroscopy

H. G. Suzuki, Koichi Yamamoto, 1978 .

Characteristics of Embrittlement in Steels above 600°C

Satoshi Nishimura, S. Nishimura, Hirowo G. Suzuki, 1979 .

Effect of Cooling Rates on Microstructures of β Treated α+β Titanium Alloys

H. Fujii, H. G. Suzuki, 1991 .

Hot ductility of titanium alloy: a challenge for continuous casting process

D. Eylon, H. G. Suzuki, 1998 .

Hot Ductility of Titanium Alloys–A Comparison with Carbon Steels–

D. Eylon, H. G. Suzuki, 1993 .

Deformation Characteristics of Ti-15V-3Cr-3Sn-3Al at Elevated Temperature

H. Fujii, H. G. Suzuki, 1991 .

Hot Workability of Ti-6Al-4V Alloys

H. Fujii, H. G. Suzuki, T. Ashiura, 1986 .

High-strength high-conductivity copper composites

H. G. Suzuki, 2003 .

Effect of Carbon Addition on Solidification Structure and Strength of Cu–Cr In Situ Composite

T. Takeuchi, H. G. Suzuki, K. Mihara, 1998 .

Effect of Alloying Elements on the Mechanical Properties of Cu-15%Cr In Situ Composites

H. G. Suzuki, K. Mihara, S. Sakai, 2003 .

Effect of Ti on Aging Characteristics and Strength of Cu-Cr in situ Composite

T. Takeuchi, H. G. Suzuki, K. Mihara, 1998 .

Plastic Deformation of Cr Phase in Cu-Cr Composite during Cold Rolling

K. Adachi, T. Takeuchi, H. G. Suzuki, 1997 .

Strengthening Mechanism of Cold-Drawn Wire of in situ Cu-Cr Composite

K. Adachi, T. Takeuchi, H. G. Suzuki, 1997 .

Segregation Behavior and Deformation Behavior during Soft-reduction of Unsolidified Steel Ingot

H. G. Suzuki, H. Misumi, M. Zeze, 2001 .

MECHANICAL PROPERTIES OF PARTICULATE REINFORCED TITANIUM-BASED METAL MATRIX COMPOSITES PRODUCED BY THE BLENDED ELEMENTAL P/M ROUTE

H. G. Suzuki, S. Emura, Y. Kawabe, 1992 .

EFFECT OF Si ON THE SHAPE MEMORY EFFECT OF POLYCRYSTALLINE Fe-Mn-Si ALLOYS.

M. Murakami, H. G. Suzuki, Yasushi Nakamura, 1986 .

Effect of cooling rates on microstructures in β treated Ti-5Al-2.5Sn

H. Fujii, H. G. Suzuki, 1991 .