D. Schwam

发表

Evaluation of soldering, washout and thermal fatigue resistance of advanced metal materials for aluminum die-casting dies

John F. Wallace, David Schwam, J. Wallace, 2004 .

Experimental study and modeling of H13 steel deposition using laser hot-wire additive manufacturing

M. Kottman, B. Narayanan, Gang Wang, 2016 .

USAMP Magnesium Powertrain Cast Components: Fundamental Research

Zi-kui Liu, J. Jones, B. Powell, 2007 .

NORTH AMERICAN DIE CASTING ASSOCIATION

D. Schwam, 2016 .

EFFECT OF DESIGN FACTORS ON THERMAL FATIGUE CRACKING OF DIE CASTING DIES

J. Wallace, D. Schwam, S. Birceanu, 2004 .

Die Materials for Critical Applications and Increased Production Rates

J. Wallace, D. Schwam, S. Birceanu, 2002 .

Evaluation of methods for metal cleanliness assessment in die casting

J. F. Wallace, David Schwam, J. Wannasin, 2007 .

Atomic oxygen resistant coatings for low earth orbit space structures

S. Packirisamy, D. Schwam, M. Litt, 1995 .

Creep behaviour of directionally solidified NiNiMo eutectic alloy

D. Schwam, S. Dirnfeld, 1990 .

Effects of surface laser treatments on microstructure, tension, and fatigue behavior of AISI 316LVM biomedical wires

John J. Lewandowski, David Schwam, J. Lewandowski, 2017 .

ENHANCEMENTS IN MAGNESIUM DIE CASTING IMPACT PROPERTIES

J. Wallace, Yulong Zhu, D. Schwam, 2000 .

Porosity reduction and mechanical properties improvement in die cast engine blocks

Mohammad A. Irfan, David Schwam, M. Irfan, 2012 .

Carboxy Terminus of Human Herpesvirus 8 Latency-Associated Nuclear Antigen Mediates Dimerization, Transcriptional Repression, and Targeting to Nuclear Bodies

S. Mahajan, R. Luciano, Angus C. Wilson, 2000, Journal of Virology.

Microstructure and crystallography of a directionally solidified NiNiMo eutectic alloy

D. Schwam, S. Dirnfeld, 1989 .

Hot Tearing Susceptibility and Fluidity of Semi-Solid Gravity Cast Al-Cu Alloy

J. Wannasin, D. Schwam, C. Rohloff, 2006 .

Improvement in Mechanical Properties of A356 Tensile Test Bars Cast in a Permanent Mold by Application of a Knife Ingate

D. Schwam, Yaou Wang, Xuejun Zhu, 2012, Metallurgical and Materials Transactions A.

Microstructural instability of Ni-Mo-Al unidirectionally solidified eutectics

D. Schwam, S. Dirnfeld, S. Nadiv, 1984 .

Microstructural Changes at Elevated Temperature of γ/γ′-α(Mo) Uds Eutectics

D. Schwam, S. Dirnfeld, 1983 .

Improving the Bending Fatigue Strength of Carburized Gears

B. L. Ferguson, Zhichao Li, A. Freborg, 2004 .

Optimization of Squeeze Casting for Aluminum Alloy Parts

John F. Wallace, David Schwam, J. Wallace, 2002 .

Mold Materials For Permanent Molding of Aluminum Alloys

J. Wallace, D. Schwam, 2001 .

Energy Saving Melting and Revert Reduction Technology: Melting Efficiency in Die Casting Operations

David Schwam, D. Schwam, 2012 .

Effects of process parameters on quality of squeeze casting A356 alloy

J. Wallace, D. Schwam, Q. Chang, 2010 .

Optimization of the Squeeze Casting Process for Aluminum Alloy Parts

Yulong Zhu, J. F. Wallace, D. Schwam, 2002 .