Lihua Zhu

发表

Warm Tensile Deformation and Fracture Behavior of AZ31 Magnesium Alloy Sheets Processed by Constrained Groove Pressing

Yanjin Guan, Xiebin Wang, Zongshen Wang, 2020, Journal of Materials Engineering and Performance.

Deformation behavior and microstructure in the low-frequency vibration upsetting of titanium alloy

Guoqun Zhao, Yanjin Guan, C. Pruncu, 2022, Journal of Materials Processing Technology.

Influence of Nanocrystalline–Amorphous Composite Layer on Tensile Properties of Pure Titanium

Yanjin Guan, Zongshen Wang, Jun Lin, 2020, Journal of Materials Engineering and Performance.

Influence of process parameters of ultrasonic shot peening on surface nanocrystallization and hardness of pure titanium

Yanjin Guan, Jun Lin, Lihua Zhu, 2017 .

Effects of constrained groove pressing and temperature-assisted ultrasonic shot peening on microstructure and mechanical properties of a two-phase Mg-Li alloy

Zongshen Wang, Lihua Zhu, H. Ngwangwa, 2023, Journal of Materials Research and Technology.

The enhanced thermal stability of the nanocrystalline-amorphous composite layer on pure titanium induced by ultrasonic shot peening

Yanjin Guan, Jun Lin, Lihua Zhu, 2019, Journal of Alloys and Compounds.

Effect of strain path on microstructure and mechanical properties of AZ31 magnesium alloy sheets processed by constrained groove pressing

Yanjin Guan, Zongshen Wang, Tao Wang, 2021 .

Microstructure and Mechanical Properties of a Two‐Phase Mg–Li Alloy Processed By Constrained Groove Pressing

Yanjin Guan, Wen Zhai, Hongyu Y Zheng, 2020, Advanced Engineering Materials.

Influence of erbium addition on the defects of selective laser-melted 7075 aluminium alloy

C. Chua, Yongling Wu, Zongshen Wang, 2022 .

Constitutive model of 6063 aluminum alloy under the ultrasonic vibration upsetting based on Johnson-Cook model.

Yanjin Guan, Jun Lin, Lihua Zhu, 2019, Ultrasonics.

A nanocrystalline-amorphous mixed layer obtained by ultrasonic shot peening on pure titanium at room temperature.

Yanjin Guan, Jun Lin, Lihua Zhu, 2018, Ultrasonics sonochemistry.

Process analysis and hole type optimization of micro-groove multi-pass rolling

G. Zhu, Zheng Chang, Zongshen Wang, 2021, The International Journal of Advanced Manufacturing Technology.

Process analysis and hole type optimization of micro-groove multi-pass rolling

G. Zhu, Zheng Chang, Zongshen Wang, 2021, The International Journal of Advanced Manufacturing Technology.

Process Analysis and Roller Optimization of Micro-Groove Multi-Pass Rolling

G. Zhu, Zheng Chang, Zongshen Wang, 2021 .

Effects of ultrasonic shot peening process parameters on nanocrystalline and mechanical properties of pure copper surface

Yanjin Guan, Jun Lin, Lihua Zhu, 2021 .

A new analytical model to predict residual stress induced by ultrasonic shot peening

Yanjin Guan, Zongshen Wang, Jun Lin, 2022, International Journal of Mechanical Sciences.

Influence of Surface Nanocrystallization and Partial Amorphization Induced by Ultrasonic Shot Peening on Surface Properties of 7075 Aluminum Alloy

Yanjin Guan, Hongyu Y Zheng, Zongshen Wang, 2020, Journal of Materials Engineering and Performance.

Mechanical and fatigue properties of micro-groove structure formed by multi-pass rolling

G. Zhu, Zheng Chang, Zongshen Wang, 2022, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

Influence of process parameters of ultrasonic shot peening on surface roughness and hydrophilicity of pure titanium

Yanjin Guan, Jun Lin, Lihua Zhu, 2017 .

Investigation on femtosecond laser shock peening of commercially pure copper without ablative layer and confinement layer in air

Hongyu Y Zheng, Zongshen Wang, Wenhui Yu, 2022, Optics & Laser Technology.

Tailoring thermal behavior and solid–liquid contact area of Sn/Cu composite solder during ultrasonic-assisted transient liquid phase process

Mingyu Li, Lihua Zhu, Dashi Lu, 2023, Journal of Materials Science: Materials in Electronics.

Effects of ultrasonic vibration on performance and microstructure of AZ31 magnesium alloy under tensile deformation

Yanjin Guan, Jun Lin, Lihua Zhu, 2018 .

Effects of ultrasonic vibration on performance and microstructure of AZ31 magnesium alloy under tensile deformation

Yanjin Guan, Jun Lin, Lihua Zhu, 2018, Journal of Central South University.

Study on ultrasonic vibration assisted upsetting of 6063 aluminum alloy

Yanjin Guan, Lihua Zhu, C. Zhong, 2017 .

Investigations on the surface effect of ultrasonic vibration-assisted 6063 aluminum alloy ring upsetting

Yanjin Guan, Jun Lin, Lihua Zhu, 2018 .

Investigations on the surface effect of ultrasonic vibration-assisted 6063 aluminum alloy ring upsetting

Yanjin Guan, Jun Lin, Lihua Zhu, 2018, The International Journal of Advanced Manufacturing Technology.

Molecular Dynamics Simulation of the Incident Energy Effect on the Properties of TiN Films

Yanjin Guan, D. Wang, Jun Lin, 2023, Coatings.

Influence of process parameters of ultrasonic shot peening on surface nanocrystallization and hardness of pure titanium

Yanjin Guan, Jun Lin, Lihua Zhu, 2016, The International Journal of Advanced Manufacturing Technology.

Effects of ultrasonic vibration on the compression of pure titanium

Yanjin Guan, Jun Lin, Lihua Zhu, 2018, Ultrasonics.

Ultrasound-induced interinhibitive dissolution-precipitation evolution and significantly improved mechanical properties of Kovar/SnSb10 assembly

Hongjun Ji, Mingyu Li, Yufeng Li, 2023, Journal of Materials Research and Technology.

Studies on ultrasonic vibration-assisted coining of micro-cylinder

Yanjin Guan, Jun Lin, Lihua Zhu, 2018, The International Journal of Advanced Manufacturing Technology.