M. Seidenstuecker

发表

Release behavior of VAN from four types of CaP-ceramic granules using various loading methods at two different degrees of acidity

A. Bernstein, N. Suedkamp, H. Mayr, 2017, Journal of Materials Science: Materials in Medicine.

A human bone infection organ model for biomaterial research.

M. Bohner, A. Bernstein, H. Mayr, 2022, Acta biomaterialia.

Microporous ß-Tricalcium Phosphate (TCP) - A Delivery Vehicle of Growth Factors and Drugs

A. Bernstein, N. Suedkamp, H. Mayr, 2013 .

Novel Method for Loading Microporous Ceramics Bone Grafts by Using a Directional Flow

A. Bernstein, N. Suedkamp, H. Mayr, 2015, Journal of functional biomaterials.

Mechanical Properties of the Composite Material consisting of β-TCP and Alginate-Di-Aldehyde-Gelatin Hydrogel and Its Degradation Behavior

H. Schmal, A. Bernstein, M. Seidenstuecker, 2021, Materials.

Alendronate Release from UHMWPE-Based Biomaterials in Relation to Particle Size of the GUR Powder for Manufacturing

C. Friedrich, A. Bernstein, H. Mayr, 2019, Materials.

Correlation of Biomechanical Alterations under Gonarthritis between Overlying Menisci and Articular Cartilage

H. Schmal, A. Bernstein, H. Mayr, 2020, Applied Sciences.

Batch Fabrication of a Polydimethylsiloxane Based Stretchable Capacitive Strain Gauge Sensor for Orthopedics

N. Rosenstiel, P. Woias, Priyank Agarwal, 2022, Polymers.

Sustained release of rhBMP-2 from microporous tricalciumphosphate using hydrogels as a carrier

A. Bernstein, N. Suedkamp, H. Mayr, 2016, BMC Biotechnology.

Alternative Geometries for 3D Bioprinting of Calcium Phosphate Cement as Bone Substitute

H. Schmal, M. Seidenstuecker, Jennifer Blankenburg, 2022, Biomedicines.

Composite material consisting of microporous β-TCP ceramic and alginate for delayed release of antibiotics.

M. Bohner, A. Bernstein, N. Suedkamp, 2017, Acta biomaterialia.

Inverse 3D Printing with Variations of the Strand Width of the Resulting Scaffolds for Bone Replacement

H. Schmal, A. Bernstein, M. Seidenstuecker, 2021, Materials.

Inversely 3D-Printed β-TCP Scaffolds for Bone Replacement

R. Gadow, R. Krastev, A. Bernstein, 2019, Materials.

3D Powder Printed Bioglass and β-Tricalcium Phosphate Bone Scaffolds

Frank Syrowatka, Rainer Gadow, Anke Bernstein, 2017, Materials.

Release kinetics and antibacterial efficacy of microporous β-TCP coatings

R. Neubert, Y. Mrestani, A. Bernstein, 2013 .

Fixation Performance of Bioabsorbable Zn-6Ag Pins for Osteosynthesis

M. Seidenstuecker, A. Kovács, Salome Hagelstein, 2022, Materials.

Mechanical Analysis and Corrosion Analysis of Zinc Alloys for Bioabsorbable Implants for Osteosynthesis

M. Seidenstuecker, A. Kovács, Salome Hagelstein, 2022, Materials.

The Mineralization of Various 3D-Printed PCL Composites

Y. Thomann, R. Thomann, H. Schmal, 2022, Journal of functional biomaterials.

Gelatin Nanoparticles for Targeted Dual Drug Release out of Alginate-di-Aldehyde-Gelatin Gels

R. Süss, M. Seidenstuecker, P. Schilling, 2022, Gels.

Viscoelasticity and histology of the human cartilage in healthy and degenerated conditions of the knee

A. Bernstein, N. Suedkamp, H. Mayr, 2019, Journal of Orthopaedic Surgery and Research.

About 3D Printability of Thermoplastic Collagen for Biomedical Applications

G. Minas, H. Schmal, E. Klüver, 2022, Bioengineering.

Carbon-Fibre-Reinforced SiC Composite (C/SiSiC) as an Alternative Material for Endoprosthesis: Fabrication, Mechanical and In-Vitro Biological Properties

R. Gadow, A. Bernstein, N. Suedkamp, 2018, Materials.

Influence of 3D Printing Parameters on the Mechanical Stability of PCL Scaffolds and the Proliferation Behavior of Bone Cells

H. Schmal, Fabian Huber, M. Seidenstuecker, 2022, Materials.

Parametric Numerical Modeling and Fabrication of PCL Scaffolds for Bone Tissue Engineering Applications

B. Rolauffs, M. Seidenstuecker, A. Früh, 2022, Applied Sciences.

The Effect of Collagen-I Coatings of 3D Printed PCL Scaffolds for Bone Replacement on Three Different Cell Types

H. Schmal, D. Velten, A. Bernstein, 2021, Applied Sciences.

Effect of 20 μm thin ceramic coatings of hydroxyapatite, bioglass, GB14 and Beta-Tricalciumphosphate with copper on the biomechanical stability of femoral implants.

A. Killinger, H. Schmal, H. Mayr, 2023, Journal of the mechanical behavior of biomedical materials.

Adjustment of Micro- and Macroporosity of ß-TCP Scaffolds Using Solid-Stabilized Foams as Bone Replacement

F. Kern, M. Seidenstuecker, Lukas Dufner, 2023, Bioengineering.

About the Mechanical Strength of Calcium Phosphate Cement Scaffolds

H. Schmal, M. Seidenstuecker, Johannes Vinke, 2023, Designs.

Biocompatibility Assessment of Zinc Alloys as a New Potential Material for Bioabsorbable Implants for Osteosynthesis

M. Seidenstuecker, A. Kovács, Sergej Zankovic, 2023, Materials.

Analysis of Proteoglycan Content and Biomechanical Properties in Arthritic and Arthritis-Free Menisci

H. Schmal, A. Bernstein, H. Mayr, 2020, Applied Sciences.

Composite material consisting of microporous beta-TCP ceramic and alginate-dialdehyde-gelatin for controlled dual release of clindamycin and bone morphogenetic protein 2

M. Bohner, H. Schmal, A. Bernstein, 2023, Journal of Materials Science: Materials in Medicine.

A Method for the Evaluation of Early Osseointegration of Implant Materials Ex Vivo: Human Bone Organ Model

W. Prall, A. Bernstein, Sergio H Latorre, 2021, Materials.