Cemal Balci

发表

Cemal Balci, C. Balci, 2013 .

Optimum bit selection and operation for the rotary blasthole drilling using a Horizontal Drilling Rig (HDR) - A case study at KBI Murgul Copper Mine

H. Ergin, C. Kuzu, Cemal Balci, 2000 .

Performance prediction of roadheaders in metallic ore excavation

Cemal Balci, Sair Kahraman, Ramazan Comakli, 2014 .

Use of Schmidt Hammer with special reference to strength reduction factor related to cleat presence in a coal mine

H. Copur, Cemal Balci, Nuh Bilgin, 2016 .

TBM Excavation in Difficult Ground Conditions: Case Studies from Turkey

Cemal Balci, Nuh Bilgin, H. Copur, 2016 .

Field And Laboratory Studies On Performance of Chain Saw Machines

H. Copur, D. Tumac, Cemal Balci, 2010 .

Selection And Design of Mechanical Excavators And Some Recent Projects From Turkey

H. Copur, D. Tumac, Cemal Balci, 2010 .

Rock Mechanics Aspects Related to Cutting Efficiency of Mechanical Excavators, 25 Years of Experience In Istanbul

H. Copur, D. Tumac, Cemal Balci, 2012 .

Analysis of the Tunnel Boring Machine (TBM) Performance Parameters In Ayazaga-Cayirbasi Water Tunnel Project (Section III) In Istanbul

Cemal Balci, Y. Ozaydin, 2012 .

Effects of Different Cutting Patterns and Experimental Conditions on the Performance of a Conical Drag Tool

Cemal Balci, Nuh Bilgin, Deniz Tumac, 2017, Rock Mechanics and Rock Engineering.

Mechanical Excavation in Mining and Civil Industries

Cemal Balci, 2013 .

Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results

H. Copur, Cemal Balci, Nuh Bilgin, 2006 .

DESIGN METHODOLOGY, TESTING AND EVALUATION OF A CONTINUOUS MINER CUTTERHEAD FOR DUST REDUCTION IN UNDERGROUND COAL MINING

Cemal Balci, B. Asbury, M. Cigla, 2002 .

Effect of replacing disc cutters with chisel tools on performance of a TBM in difficult ground conditions

H. Copur, Cemal Balci, Nuh Bilgin, 2012 .

Predicting Performance of Raise Boring Machines Using Empirical Models

Aydin Shaterpour-Mamaghani, Cemal Balci, Nuh Bilgin, 2015, Rock Mechanics and Rock Engineering.

Emerging Mechanical Excavation Technologies

Cemal Balci, C. Balci, 2013 .

Comparison of Cutting Forces for V-Type Disc Cutter and Performance Prediction of TBM Using Portable Linear Rock Cutting Machine (PLCM)

H. Copur, D. Tumac, Cemal Balci, 2012 .

Field and laboratory studies on natural stones leading to empirical performance prediction of chain saw machines

H. Copur, D. Tumac, Cemal Balci, 2011 .

Site Investigations for Mechanized Excavation Projects

Cemal Balci, 2013 .

Difficult ground conditions dictating selection of TBM type in Istanbul

H. Copur, Cemal Balci, Nuh Bilgin, 2016 .

Future tunnelling projects in Istanbul and some considerations for using mechanized tunnelling based on previous experiences

H. Copur, Cemal Balci, Nuh Bilgin, 2013 .

Prediction of the penetration rate of rotary blast hole drills using a new drillability index

Cemal Balci, Nuh Bilgin, Sair Kahraman, 2000 .

Investigation into the effects of different rocks on rock cuttability by a V-type disc cutter

D. Tumac, Cemal Balci, C. Balci, 2012 .

Correlative study of linear small and full-scale rock cutting tests to select mechanized excavation machines

Cemal Balci, Nuh Bilgin, C. Balci, 2007 .

Cutting Performance of Chain Saw and Diamond Wire Machines in Beige Marble Quarry

H. Copur, D. Tumac, Cemal Balci, 2014 .

Correlation of rock cutting tests with field performance of a TBM in a highly fractured rock formation: A case study in Kozyatagi-Kadikoy metro tunnel, Turkey

Cemal Balci, C. Balci, 2009 .

The selection of a TBM using full scale laboratory tests and comparison of measured and predicted performance values in Istanbul Kozyatagi-Kadikoy metro tunnels

H. Copur, D. Tumac, Cemal Balci, 2008 .

Experimental Comparison of Single and Double Scroll Cutting Patterns by using Chisel Cutting to ols of Chain Saw Machines

H. Copur, D. Tumac, Cemal Balci, 2013 .

Corrigendum to: ''Performance prediction of roadheaders in metallic ore excavation'' (Tunnel. Underg. Space Technol. 40 (2014) 38-45)

Cemal Balci, Sair Kahraman, Ramazan Comakli, 2014 .

A methodology of using past experiences in the performance prediction of a TBM in a complex geology

H. Copur, Cemal Balci, Nuh Bilgin, 2013 .

Predicting performance of EPB TBMs by using a stochastic model implemented into a deterministic model

H. Copur, D. Tumac, Cemal Balci, 2014 .

Hard Rock TBMs

Cemal Balci, C. Balci, 2013 .

Experimental studies using a new portable linear rock cutting machine and verification for disc cutters

Cemal Balci, Ramazan Comakli, Deniz Tumac, 2021 .

Cuttability of coal from the Soma coalfield in Turkey

D. Tumac, Cemal Balci, Nuh Bilgin, 2015 .

Development of a portable rock cutting rig for rock cuttability determination

D. Tumac, Cemal Balci, Nuh Bilgin, 2010 .

Control of rock cutting efficiency by muck size

Cemal Balci, Nuh Bilgin, H. Tuncdemir, 2008 .

Full-Scale Linear Cutting Experiments With a Conical Cutter for Simulating Different Cutting Patterns

H. Copur, D. Tumac, Cemal Balci, 2016 .

Investigations into the cutting characteristics of CCS type disc cutters and the comparison between experimental, theoretical and empirical force estimations

D. Tumac, Cemal Balci, C. Balci, 2015 .

Estimation of the Performance of Chain Saw Machines from Shore Hardness and the Other Mechanical Properties

H. Copur, D. Tumac, Cemal Balci, 2013 .

PERFORMANCE PREDICTION AND COMPARISON WITH IN-SITU VALUES OF A TBM: A CASE STUDY OF OTOGAR-BAGCILAR METRO TUNNEL IN ISTANBUL

Cemal Balci, Nuh Bilgin, Deniz Tumac, 2009 .