K. Krishna

发表

Mechanical properties of Zr–2.5%Nb pressure tube material subjected to heat treatments in α + β phase field

S. K. Jha, S. Neogy, D. Srivastava, 2014 .

The effect of loading direction and Sn alloying on the deformation modes of Zr: An in-situ neutron diffraction study

M. Preuss, G. Tímár, Arnas Fitzner, 2016 .

Microstructural and textural evolution during hot deformation of dilute Zr-Sn alloy

S. K. Jha, K. Narayan, D. Srivastava, 2016 .

Annealing of cold worked two-phase Zr-2.5 Nb—Associated microstructural developments

K. Narasimhan, S. Banerjee, I. Samajdar, 2009 .

Near boundary gradient zone and sensitization control in austenitic stainless steel

N. Birbilis, V. Kain, I. Samajdar, 2015 .

Resistance to hydride formation in zirconium : An emerging possibility

S. Banerjee, A. Sain, I. Samajdar, 2006 .

Coarsening of second phase in a two-phase Zr-2.5Nb: on the role of phase boundaries

R. Doherty, I. Samajdar, R. Tewari, 2009 .

Recrystallization and structure-property correlation in V–Ti–Ta alloys

A. K. Sinha, R. Tewari, D. Banerjee, 2020 .

Study of microstructure, texture and mechanical properties of Zr–2.5Nb alloy pressure tubes fabricated with different processing routes

S. K. Jha, S. Neogy, D. Srivastava, 2013 .

Role of grain/phase boundary nature on the formation of hydrides in Zr–2.5%Nb alloy

S. Banerjee, I. Samajdar, G. K. Dey, 2011 .

The role of crystallographic orientations on heterogeneous deformation in a zirconium alloy: A combined experimental and modeling study

D. Fullwood, I. Samajdar, A. Patra, 2020 .

Grain fragmentation and twinning in deformed Zircaloy 2: Response to positron lifetime measurements

S. Banerjee, P. Pant, I. Samajdar, 2010 .

Ductile-to-Brittle Transition in Low-Alloy Steel: A Combined Experimental and Numerical Investigation

V. Kain, Naveen Kumar, I. Samajdar, 2019, Journal of Materials Engineering and Performance.

Effect of Gallium ion damage on poly-crystalline Zirconium: Direct experimental observations and molecular dynamics simulations

I. Samajdar, R. Tewari, D. Srivastava, 2015 .

Defining recrystallization in pilgered Zircaloy-4: From preferred nucleation to growth inhibition

I. Samajdar, R. Tewari, S. Sahoo, 2011 .

Comparative study of methods of the determination of Kearns parameter in zirconium

I. Samajdar, D. Srivastava, G. K. Dey, 2011 .

Strain Localizations in Ultra Low Carbon Steel : Exploring the Role of Dislocations

L. Kestens, P. Pant, I. Samajdar, 2011 .

Novel defects in Al–Pd–Fe complex metallic alloys: A micromechanical modelling approach

S. Banerjee, A. Arya, M. Feuerbacher, 2011 .

Defining the Role of Silicon Substrate Orientation on the Polycrystalline Diamond Film: A Novel Approach for Characterizing Faceted Microstructures

D. S. Misra, I. Samajdar, Abha Misra, 2017 .

Influence of Sn on Deformation Mechanisms During Room Temperature Compression of Binary Zr–Sn Alloys

M. Preuss, J. Q. D. Fonseca, D. Srivastava, 2015 .

Textural and microstructural evolutions during deformation and annealing of Nb–1% Zr–0.1% C (wt%) alloy

R. Tewari, G. K. Dey, B. Vishwanadh, 2013 .

Understanding the influence of graphene-based lubricant/coating during fretting wear of zircaloy

A. Mukhopadhyay, K. Balani, Dewika Mishra, 2022, Wear.

Hot deformation behavior of Zr-1Nb alloy in two-phase region –microstructure and mechanical properties

K. Suresh, K. Saxena, D. Srivastava, 2018 .

Formation mechanism of the Nb2C phase in the Nb–1Zr–0.1C (wt.%) alloy and interrelation between γ, β and α-Nb2C carbide phases

H. Fraser, R. Banerjee, A. Arya, 2016 .

Role of irradiation induced defects in altering the micro-mechanical response of Zr domains during nano indentation: A molecular dynamics study

Naveen Kumar, R. Tewari, G. K. Dey, 2019, Computational Materials Science.

Effect of Sn content and texture on the twinning behaviour of Zr–Sn binary alloys at low temperature

D. Srivastava, N. Keskar, K. Krishna, 2015 .

Sub-surface microstructural investigation for establishing micro-mechanisms of wear in sliding of SiC and SiC-WC ceramics

Young‐Wook Kim, A. Mukhopadhyay, M. Jangid, 2022, Wear.

Plane strain compression testing of Sanicro 28 by channel-die compression test: A direct microstructural observation

V. Kain, I. Samajdar, P. Sivaprasad, 2017 .

A Numerical Study of the Effect of Extrusion Parameters on the Temperature Distribution in Zr–2.5Nb

S. K. Jha, D. Srivastava, G. K. Dey, 2015 .

Microstructural and textural developments during Zircaloy-4 fuel tube fabrication

I. Samajdar, R. Tewari, S. Neogy, 2008 .

Determination of correlation parameters for evaluation of mechanical properties by Small Punch Test and Automated Ball Indentation Test for Zr–2.5% Nb pressure tube material

S. K. Jha, S. Neogy, D. Srivastava, 2013 .

Microstructural Studies of Heat Treated Zr-2.5Nb Alloy for Pressure Tube Applications

S. K. Jha, S. Neogy, D. Srivastava, 2011 .

Microstructural evolution in (α + βZr) region of Zr-2.5 wt% Nb annealed at different temperatures: Effect on mechanical properties

A. Sarkar, K. Krishna, K. Vaibhaw, 2020 .

Quantifying the mesoscopic shear strains in plane strain compressed polycrystalline zirconium

R. Doherty, S. Mukherjee, P. Pant, 2014 .

Zirconium and its Alloys: Properties and Characteristics

R. Tewari, S. Neogy, K. V. Mani Krishna, 2020 .

Influence of dislocations and grain boundaries on diffraction line profiles of nano-crystalline materials: A numerical study

N. Naveen Kumar, R. Tewari, S. Chandra, 2020 .

Effect of thermal aging on embrittlement of Cr–Mo–V pressure vessel steel

V. Kain, Naveen Kumar, I. Samajdar, 2019 .

Effect of Prior Plastic Deformation on the α-Cr Precipitation in a Binary Ni-Cr Alloy

R. Tewari, N. Keskar, K. Krishna, 2020, Metallurgical and Materials Transactions A.

Constitutive Analysis of Zr-1Nb Alloy for Different Phase Regions

S. K. Jha, K. Saxena, D. Srivastava, 2019, Materials Performance and Characterization.

Orientation-Dependent Tensile Flow Behavior of Zircaloy-4 at Room Temperature

Swadesh Kumar Singh, A. Singh, K. Satyanarayana, 2018, Metallography, Microstructure, and Analysis.

Automated reconstruction of pre-transformation microstructures in zirconium

P. Pant, I. Samajdar, D. Srivastava, 2010 .

Influence of Energy Density on the Microstructure, Growth Orientation, and Anisotropy of Magnetic Properties in Additively Manufactured Fe-3.8wt%Si Transformer Steels

V. Chaudhary, S. Mantri, N. Dahotre, 2023, Materialia.

Role of Crystal Orientation on Dislocation Nucleation in Zr: A Molecular Dynamics Study

K. Krishna, 2022, Transactions of the Indian Institute of Metals.