Rui-Fen Guo

发表

Bio-inspired lamellar hydroxyapatite/magnesium composites prepared by directional freezing and pressureless infiltration

P. Shen, Li-Kai Yang, Quan Jin, 2021 .

Effects of oxide addition on the microstructure and mechanical properties of lamellar SiC scaffolds and Al–Si–Mg/SiC composites prepared by freeze casting and pressureless infiltration

Q. Jiang, P. Shen, Alateng Shaga, 2016 .

Electrically induced spreading of EGaIn on Cu substrate in an alkali solution under wetting and non-wetting conditions

Q. Jiang, P. Shen, Rui-Fen Guo, 2019, Applied Surface Science.

Preparation and characterization of high damage-tolerance nacre-inspired magnesium alloy matrix composites with high carbon nanotube contents

Q. Jiang, Xun Sun, P. Shen, 2020, Carbon.

The role of TiO2 incorporation in the preparation of B4C/Al laminated composites with high strength and toughness

Q. Jiang, P. Shen, Li-Kai Yang, 2018, Ceramics International.

High damage-tolerance bio-inspired ZL205A/SiC composites with a lamellar-interpenetrated structure

Q. Jiang, Yabo Liu, P. Shen, 2017 .

Effect of components on the microstructures and properties of rare-earth zirconate ceramics prepared by ultrafast high-throughput sintering

P. Shen, Zhiyong Zhao, Rui-Fen Guo, 2021 .

Al–7Si–5Cu/Al2O3–ZrO2 Laminated Composites with Excellent and Anisotropic Wear Resistance

Q. Jiang, P. Shen, Li-Kai Yang, 2018, Advanced Engineering Materials.

Effects of ceramic lamellae compactness and interfacial reaction on the mechanical properties of nacre-inspired Al/Al2O3–ZrO2 composites

Q. Jiang, P. Shen, Li-Kai Yang, 2018 .

Current-driven spontaneous infiltration of molten Al into a porous PSZ preform with a lamellar structure

Bo Yang, Q. Jiang, P. Shen, 2018 .

Influence of matrix property and interfacial reaction on the mechanical performance and fracture mechanism of TiC reinforced Al matrix lamellar composites

Q. Jiang, P. Shen, Alateng Shaga, 2020 .

Role of Si in the wetting of TiC by Al

P. Shen, Rui-Fen Guo, Ya Wang, 2020, Journal of Materials Science.

Optimization of the properties in Al/SiC composites by tailoring microstructure through gelatin freeze casting

Q. Jiang, P. Shen, Rui-Fen Guo, 2019, Materials Science and Engineering: A.

Developing high toughness and strength Al/TiC composites using ice-templating and pressure infiltration

Q. Jiang, P. Shen, Rui-Fen Guo, 2017 .

Cold sintering of ceria-based solid electrolyte with the assistance of a core-shell structure

P. Shen, Rui-Fen Guo, Ning Guo, 2022, Scripta Materialia.

Effects of composition and sintering temperature on the structure and compressive property of the lamellar Al2O3–ZrO2 scaffolds prepared by freeze casting

Q. Jiang, P. Shen, Yu-Hua Liu, 2015, Journal of Materials Science.

High compressive strength in nacre-inspired Al−7Si−5Cu/Al2O3–ZrO2 composites at room and elevated temperatures by regulating interfacial reaction

Q. Jiang, P. Shen, Alateng Shaga, 2017 .

Lamellar-interpenetrated Al−Si−Mg/Al2O3−ZrO2 composites prepared by freeze casting and pressureless infiltration

Q. Jiang, P. Shen, Rui-Fen Guo, 2017 .

Ultrafast densification of high-entropy oxide (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 by reactive flash sintering

P. Shen, Shenbao Jin, X. Qiu, 2020 .

Synthesis of damage-tolerant Cu-matrix composites with nacre-inspired laminate-reticular hierarchical architecture via tuning compositional wettability

P. Shen, Quan Jin, Rui-Fen Guo, 2020 .

Ultrafast high-temperature sintering of bulk oxides

P. Shen, Zhiyong Zhao, Rui-Fen Guo, 2021 .

Effect of oxygen content on the microstructure, compression properties and work-hardening behaviors of ZrCuAlNi glassy composites

F. Qiu, Q. Jiang, Z. Bai, 2013 .

Flash Sintering of 3YSZ and In-Situ Joining with 304 Stainless Steel Using Copper as an Interlayer

P. Shen, Rui-Fen Guo, Yue Cao, 2020, Scripta Materialia.

Preparation of nacre-like composites by reactive infiltration of a magnesium alloy into porous silicon carbide derived from ice template

Heng Zhang, Ping Shen, Q. Jiang, 2016 .

Processing and mechanical properties of lamellar-structured Al–7Si–5Cu/TiC composites

Q. Jiang, P. Shen, Alateng Shaga, 2016 .

Ultrafast high-temperature sintering of lanthanum-chromite-based ceramics

P. Shen, Rui-Fen Guo, Zhigang Zhao, 2022, Journal of the European Ceramic Society.

The influence of surface orientation on the wetting and reaction at the Al/MgAl2O4 interfaces

Q. Jiang, P. Shen, Rui-Fen Guo, 2019 .

Preparation of laminated Cr3C2/Cu composites by direct ink writing and pressureless infiltration

Dongjie Zhao, Li-Kai Yang, Rui-Fen Guo, 2022, Additive Manufacturing.

A novel strategy for fabricating biomimetic gradient metal-ceramic composites by dynamic freeze casting and pressure infiltration

Q. Jiang, P. Shen, Li-Kai Yang, 2019, Scripta Materialia.

Development of a nacre-like metal-ceramic composite with a brick-and-mortar structure and high ceramic content

Alateng Shaga, Rui-Fen Guo, Zhi-Jie Hu, 2023, Composites Part A: Applied Science and Manufacturing.

Lamellar and interpenetrated Al/(Al2O3–TiC) composites prepared by bidirectional freeze casting and melt infiltration

P. Shen, Rui-Fen Guo, Zhi-Jie Hu, 2022, Ceramics International.

Formation mechanism and control of a large-scale lamellar structure in freeze-cast Al 2 O 3 ceramics under dual temperature gradients

Q. Jiang, P. Shen, Rui-Fen Guo, 2018, Journal of the European Ceramic Society.

The role of CuO–TiO2 additives in the preparation of high-strength porous alumina scaffolds using directional freeze casting

Q. Jiang, P. Shen, Rui-Fen Guo, 2016, Journal of Porous Materials.

Construction of nacre-mimetic composites with a “brick-and-mortar” architecture based on structural defects in ice-templating

P. Shen, Rui-Fen Guo, Zhi-Jie Hu, 2021 .

Exploiting bio-inspired high energy-absorbent metal/ceramic composites through emulsion-ice-templating and melt infiltration

P. Shen, Li-Kai Yang, Quan Jin, 2020 .

Electrochemically-driven direct joining of Ni and ZrO2

Bo Yang, Q. Jiang, P. Shen, 2017 .

Preparation of laminated Al/B4C composites with gradient structures and properties through centrifugal freezing and pressure infiltration

Li-Kai Yang, Rui-Fen Guo, Chuanwei Wang, 2023, Ceramics International.

Polarity effects on the wettability and interfacial chemistry at Cu–YSZ interface by applying a direct current

Bo Yang, Q. Jiang, P. Shen, 2017 .

Significant improvement in the wettability of ZrO2 by molten Al under the application of a direct current

Bo Yang, Q. Jiang, P. Shen, 2016 .

Ultra-fast high-temperature synthesis and densification of high-entropy diborides and diboride-carbide ceramics

Rui-Fen Guo, Hai-Rong Mao, Ping Shen, 2023, Journal of the European Ceramic Society.

Preparation and characterization of porcupine-fish-spine-inspired AZ91/SiC composites with radial lamellar structures

Zhi-Qiang Zhang, Rui-Fen Guo, Xun Sun, 2023, Materials Science and Engineering: A.