S. Hong

发表

Multiparametric investigation on NOx removal from simulated diesel exhaust with hydrocarbons by pulsed corona discharge

Young-Hoon Song, Yongho Kim, E. Filimonova, 2002 .

Radio Frequency Thermal Plasma Treatment for Size Reduction and Spheroidization of Glass Powders Used in Ceramic Electronic Devices

S. Hong, Jun-Ho Seo, Dong Uk Kim, 2007 .

Arc plasma jets of a nontransferred plasma torch

K. D. Kang, S. Hong, 1996 .

Fluid-particle hybrid simulation on the transports of plasma, recycling neutrals, and carbon impurities in the Korea Superconducting Tokamak Advanced Research divertor region

S. Hong, Deok-Kyu Kim, 2005 .

Operational features and air plasma characteristics of a thermal plasma torch with hollow electrodes

K. Kim, Hur Min, S. Hong, 2003 .

Monté Carlo Simulation for Particle Behavior of Recycling Neutrals in a Tokamak Divertor Region

K. Im, S. Hong, Deok-Kyu Kim, 1997 .

Spatio-temporal images of single streamer propagation in dielectric barrier discharge

W. S. Kang, S. Hong, Yong-Ho Kim, 2002 .

Simulation of tokamak SOL and divertor region including heat flux mitigation by gas puffing

Y. Na, H. Lee, Joon-Wook Ahn, 2012 .

Numerical Simulations on Internal Transport Barrier Formation in Reversed Shear Regime of KSTAR Tokamak

J. M. Park, Sun Hee Kim, S. Hong, 2004 .

Numerical analysis on effects of various cathode and nozzle geometries on plasma characteristics of transferred arc torches for waste treatment

J. M. Park, M. Hur, S. Hong, 2001 .

Production of hydrogen and carbon black by methane decomposition using DC-RF hybrid thermal plasmas

K. Kim, S. Hong, J. Nam, 2004 .

Numerical Simulation of Pure Argon Plasma Transport in a Linear Divertor Simulator

Ki Min Kim, S. Hong, Hyunsun Han, 2009 .

Adsorbability enhancement of activated carbon by dielectric barrier discharge plasma treatment

Dong Soo Lee, S. Hong, K. Paek, 2005 .

Edge plasma transport modeling for the design of KT-2 tokamak poloidal divertor

K. Im, S. Hong, Deok-Kyu Kim, 1995, Proceedings of 16th International Symposium on Fusion Engineering.

Magnetically driven rotation of thermal plasma jet for non-degradable CF4 treatment

Dong-Wha Park, Sooseok Choi, S. Kim, 2012 .

Porous nanocrystalline titania films by plasma electrolytic oxidation

Yong Han, S. Hong, K. Xu, 2002 .

A comparative study of air and nitrogen thermal plasmas for PFCs decomposition

Hyun Seok Lee, Takayuki Watanabe, Sooseok Choi, 2012 .

Enthalpy probe measurements and three-dimensional modelling on air plasma jets generated by a non-transferred plasma torch with hollow electrodes

J. M. Park, K. Kim, Sooseok Choi, 2008 .

Comparative study of two- and three-dimensional modeling on arc discharge phenomena inside a thermal plasma torch with hollow electrodes

J. M. Park, K. Kim, Sooseok Choi, 2008 .

Three-dimensional modeling of arc root rotation by external magnetic field in non-transferred thermal plasma torches

J. M. Park, K. Kim, S. Hong, 2003 .

Comparative analysis of turbulent effects on thermal plasma characteristics inside the plasma torches with rod- and well-type cathodes

M. Hur, S. Hong, 2002 .

Numerical Analysis and Experiment on a Plasma Torch with Hollow Electrodes for Hazardous Waste Treatment

M. Hur, S. Hong, Hong Cho, 1999 .

Effects of shroud gas injection on material properties of tungsten layers coated by plasma spraying

Gon-Ho Kim, Sooseok Choi, S. Kim, 2010 .

Numerical analysis of nitrogen-mixed argon plasma characteristics and injected particle behavior in an ICP torch for ultrafine powder synthesis

S. Hong, J. Park, 1995 .

High purity synthesis of carbon nanotubes by methane decomposition using an arc-jet plasma

J. M. Park, Sooseok Choi, S. Hong, 2006 .

Numerical simulation on mode transition of atmospheric dielectric barrier discharge in helium-oxygen mixture

J. M. Park, Dong Soo Lee, Yongho Kim, 2005 .

Measurements of Electron Energy by Emission Spectroscopy in Pulsed Corona and Dielectric Barrier Discharges

M. Cha, Seock-Joon Kim, Young-Hoon Song, 2003 .

Numerical study on influences of barrier arrangements on dielectric barrier discharge characteristics

W. S. Kang, Woo Seok Kang, J. M. Park, 2003 .

Experimental and numerical analysis of streamers in pulsed corona and dielectric barrier discharges

W. S. Kang, J. M. Park, Seock-Joon Kim, 2004 .

Effects of Constrictor Geometry, Arc Current, and Gas Flow Rate on Thermal Plasma Characteristics in a Segmented Arc Heater

J. M. Park, Sooseok Choi, S. Hong, 2011 .

Numerical analysis of shroud gas effects on air entrainment into thermal plasma jet in ambient atmosphere of normal pressure

K. D. Kang, S. Hong, 1999 .

Two-dimensional simulation images of pulsed corona discharges in a wire-plate reactor

Yongho Kim, S. Hong, 2002 .

SHOCK-INDUCED CHEMISTRY OF DRY AIR

K. Jhung, S. Hong, I. Kim, 1992 .

Experimental analysis on the characteristics of enthalpy probe immersed in arc plasma flow

Seong-Man Choi, S. Hong, J. Nam, 2010 .

Synthesis of boron nitride nanotubes by arc-jet plasma

Sooseok Choi, S. Hong, C. Lee, 2006 .

Effects of pellet ELM pacing on mitigation of type-I ELM energy loss in KSTAR and ITER

Y. Na, Ki Min Kim, S. Hong, 2011 .

Simulation of edge-divertor plasma transport for high-performance operation in KSTAR

Y. Na, Ki Min Kim, S. Hong, 2011 .

Measurements of Plasma Flow Velocity in DC Plasma Jets Using Perpendicular and Parallel Mach Probes

K. Chung, S. Hong, K. Chung, 1995 .

Gas Temperature Effect on Discharge-Mode Characteristics of Atmospheric-Pressure Dielectric Barrier Discharge in a Helium–Oxygen Mixture

S. Hong, Hyun-su Kim, W. Kang, 2010, IEEE Transactions on Plasma Science.

Effect of refined shape of input atomic beam on plasma density distribution in a double‐ended Q machine

K. Chung, S. Hong, 1982 .

Continuous process of carbon nanotubes synthesis by decomposition of methane using an arc-jet plasma

Jinyoung Seo, S. Hong, J. Nam, 2006 .

Continuous Synthesis of Nanostructured Sheetlike Carbons by Thermal Plasma Decomposition of Methane

K. Kim, S. Hong, W. Ju, 2007, IEEE Transactions on Plasma Science.

Numerical analysis and experiments on transferred plasma torches for finding appropriate operating conditions and electrode configuration for a waste melting process

M. Hur, S. Hong, T. Hwang, 2001 .

Crystallization of amorphous silicon thin film by using a thermal plasma jet

Sooseok Choi, S. Kim, S. Hong, 2009 .

Production of hydrogen and carbon black by methane decomposition using DC-RF hybrid thermal plasmas

K. Kim, Keun Su Kim, Jun Ho Seo, 2005, IEEE Transactions on Plasma Science.

Plasma Flow Characteristics in a Spray-Type Dielectric Barrier Discharge Reactor

Gon-Ho Kim, S. Hong, Hyun-su Kim, 2009, IEEE Transactions on Plasma Science.

Theoretical Investigations on Sprayed Particle-Plasma Interactions to Optimize Processing Parameters in D.C. Thermal Plasma Spraying

B. Choi, S. Hong, 1997 .

Influence of DC arc jets on flow fields analyzed by an integrated numerical model for a DC–RF hybrid plasma

J. M. Park, Jin Myung Park, Sang Hee Hong, 2008 .

Thermal Plasma Flow and Equivalent Circuit Analyses on the Electrical Coupling of a DC-RF Hybrid Plasma Torch

J. M. Park, S. Hong, Jun-Ho Seo, 2009 .

Transport simulation of ELM pacing by pellet injection in tokamak plasmas

J. Contributors, S. H. Hong, Y. Na, 2010 .