D. Zhang

发表

Nano-structure of Co–W alloy electrodeposited from gluconate bath

M. Fay, S. Harris, S. Gill, 2013 .

Characterization and solderability of cold sprayed Sn-Cu coatings on Al and Cu substrates

Christopher Mark Johnson, C. M. Johnson, D. G. McCartney, 2010 .

Cold gas dynamic spraying of aluminum: The role of substrate characteristics in deposit formation

P. Shipway, D. G. McCartney, D. Zhang, 2005 .

An experimental and modeling investigation of aluminum-based alloys and nanocomposites processed by ultrasonic cavitation processing

Y. Xuan, L. Nastac, D. Zhang, 2016 .

Utilizing Processing Parameters for Evaluating Polymer Viscosity during Plastication in Injection Molding

R. Dubay, J. Hernandez, D. Zhang, 2009 .

Microdamage in polycrystalline ceramics under dynamic compression and tension

R. Feng, Ke-shi Zhang, M. S. Wu, 2005 .

Developing higher strength microalloyed medium carbon steel capable of being fracture split after laser transformation notching

P. Shipway, D. G. McCartney, K. Voisey, 2013 .

Sliding wear of a self-mated thermally sprayed chromium oxide coating in a simulated PWR water environment

V. Ratia, P. Shipway, D. G. McCartney, 2019, Wear.

Interpreting in situ x-ray diffraction data from high pressure deformation experiments using elastic–plastic self-consistent models: an example using quartz

P. Burnley, D. Zhang, 2008 .

A multiscale-indentation study of deformation and fracture in 6H polycrystalline silicon carbide

A. Roy, L. G. Zhao, D. Zhang, 2020 .

Micromechanical investigation of heterogeneous microplasticity in ceramics deformed under high confining stresses

R. Feng, M. S. Wu, D. Zhang, 2005 .

Grain structure control during metal 3D printing by high-intensity ultrasound

D. Zhang, D. StJohn, M. Easton, 2020, Nature Communications.

Microstructure formation and corrosion behaviour in HVOF-sprayed Inconel 625 coatings

D. Zhang, S. J. Harris, D. G. McCartney, 2003 .

Co-electrodeposition of inorganic fullerene (IF-WS2) nano-particles with cobalt from a gluconate bath with anionic and cationic surfactants

C. R. Carpenter, Yanqiu Zhu, N. Weston, 2011 .

In situ synthesis and thermal shock resistance of mullite used for thermal storage ceramics in solar thermal power generation

J. F. Wu, Lidong Chen, T. Deng, 2014 .

Advanced Numerical Modeling of the Dispersion of Ceramic Nanoparticles during Ultrasonic Cavitation Processing and Solidification of 6061-based Nanocomposites

L. Nastac, D. Zhang, 2015 .

Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components

P. Shipway, D. G. McCartney, T. Hussain, 2009 .

Thermal Conductivity of Al2O3/Glass/Cf Composite Substrates Prepared by Low Temperature Sintering

X. Ouyang, D. Zhang, S. X. Wang, 2015 .

Microstructural characterisation of subsurface deformation and the degradation of Stellite 6 induced by self-mated sliding contact in a simulated PWR environment

P. Shipway, D. G. McCartney, D. Stewart, 2021 .

The effect of laser transformation notching on the controlled fracture of a high carbon (C70S6 ) steel

P. Shipway, K. Voisey, S. Harris, 2008 .

Grain structure control during metal 3D printing by high-intensity ultrasound

D. StJohn, M. Easton, M. Bermingham, 2020, Nature Communications.

The effect of temperature on sliding wear of self-mated HIPed Stellite 6 in a simulated PWR water environment

P. Shipway, D. Stewart, D. Zhang, 2019, Wear.

Comparison of the sliding wear behaviour of self-mated HIPed Stellite 3 and Stellite 6 in a simulated PWR water environment

P. Shipway, D. Stewart, D. Zhang, 2019, Wear.

Microstructural characterisation of high velocity oxyfuel thermally sprayed Stellite 6

S. Harris, D. Zhang, G. Kong, 2003 .

Microstructure and complex magnetic permeability of thermally sprayed NiZn ferrite coatings for electromagnetic wave absorbers

K. Bobzin, C. Weil, M. Brühl, 2010 .

Fine embossing of chalcogenide glasses - : a new fabrication route for photonic integrated circuits

Trevor M. Benson, Angela B. Seddon, D. Zhang, 2006 .

Diffusion reactions in the iron-neodymium binary alloy system

I. R. McColl, J. Wood, D. Zhang, 1997 .

Control of pore structures and sizes in freeze cast ceramics

K. Zhou, Dou Zhang, Yan Zhang, 2013 .

Fretting wear of sintered iron under low normal pressure

J. R. Moon, E. R. Leheup, D. Zhang, 1998 .

The Design of Single Mode Large Cross-section Glass-based Waveguides for Photonic Integrated Circuits

A. Loni, D. Furniss, A. Vukovic, 2006 .

Novel glass compositions and fabrication technologies for photonic integrated circuits

P. Sewell, A. Vukovic, D. Furniss, 2005, Proceedings of 2005 7th International Conference Transparent Optical Networks, 2005..

Fibre on glass (FOG): a novel concept for planar photonics

A. Seddon, T. Benson, J. Lousteau, 2004, Proceedings of 2004 6th International Conference on Transparent Optical Networks (IEEE Cat. No.04EX804).

Low amplitude reciprocating wear of sintered iron

J. R. Moon, E. R. Leheup, D. Zhang, 1994 .

Nanoscale investigation of deformation characteristics in a polycrystalline silicon carbide

A. Roy, L. G. Zhao, D. Zhang, 2019, Journal of the Australian Ceramic Society.

A Method for Characterizing the Degree of Inter-particle Bond Formation in Cold Sprayed Coatings

P. Shipway, D. Zhang, T. Price, 2007 .

Effects of in-plane extension on transverse thermal conductivity of a carbon–carbon 8-harness satin weave composite

D. Hayhurst, D. Zhang, 2018 .

Microstructure and wear properties of aluminum/aluminum–silicon composite coatings prepared by cold spraying

S. R. Bakshi, P. Shipway, Yao Chen, 2009 .

INVESTIGATION OF THERMAL DIFFUSIVITY FOR NANO-PHASE COMPOSITE CERAMICS

X. R. Zhang, G. Lei, Y. Jin, 1998 .

3D Stochastic Modeling of Microstructure Evolution during the Solidification of Dendritic Alloys

L. Nastac, D. Zhang, 2014 .

Particle-Substrate Interactions in Cold Gas Dynamic Spraying

P. Shipway, D. Zhang, D. McCartney, 2003, Thermal Spray 2003: Proceedings from the International Thermal Spray Conference.