Ž. Grbavčić

发表

The effective buoyancy and drag on spheres in a water-fluidized bed

H. Littman, Ž. Grbavčić, D. Vuković, 1992 .

Minimum fluid flowrate, pressure drop and stability of a conical spouted bed

H. Littman, Ž. Grbavčić, D. Vuković, 1992 .

Determination of the moisture diffusivity coefficient and mathematical modeling of drying

Z. Radojević, Ž. Grbavčić, M. Vasić, 2014 .

Prediction of the maximum spoutable bed height in spout‐fluid beds

H. Littman, Ž. Grbavčić, D. Vuković, 1991 .

Prediction of the maximum spoutable height and the average spout to inlet tube diameter ratio in spouted beds of spherical particles

M. H. Morgan, H. Littman, Ž. Grbavčić, 1979 .

Methods of Determination for Effective Diffusion Coefficient During Convective Drying of Clay Products

Z. Radojević, Ž. Grbavčić, M. Vasić, 2012 .

Structure sensitivity of dimethylamine deep oxidation over Pt/Al2O3 catalysts

N. Radić, B. Grbić, Ž. Grbavčić, 2009 .

Textural and fractal properties of CuO/Al2O3 catalyst supports

Ž. Čupić, T. Novaković, D. Jovanović, 2006 .

The sorption and crystallographic characteristics of alumina activated in a reactor for pneumatic transport

Ž. Čupić, T. Novaković, S. Petrović, 2006 .

Fluid flow pattern and solids circulation rate in a liquid phase spout-fluid bed with draft tube

M. H. Morgan, H. Littman, Ž. Grbavčić, 1992 .

The mechanics of spout-fluid beds at the minimum spout-fluid flowrate

H. Littman, Ž. Grbavčić, D. Vuković, 1983 .

The kinetics of the partial dehydration of gibbsite to activated alumina in a reactor for pneumatic transport

N. Jovanović, A. Terlecki-Baričević, T. Novaković, 2001 .

Heat transfer between a packed bed and a larger immersed spherical particle

Tatjana Kaluđerović Radoičić, R. Pesic, N. Boskovic-Vragolovic, 2014 .

Removal of Cu(II) from aqueous solutions by using fluidized zeolite A beads: Hydrodynamic and sorption studies

B. Obradovic, M. Jovanović, Ž. Grbavčić, 2014 .

Removal of volatile organic compounds from activated carbon by thermal desorption and catalytic combustion

D. Ranković, N. Radić, B. Grbić, 2007 .

Prediction of bed expansion of polydisperse quartz sand mixtures fluidized with water

Tatjana Kaluđerović Radoičić, Ž. Grbavčić, Mihal Đuriš, 2016 .

Prediction of single particle settling velocities through liquid fluidized beds

Ž. Grbavčić, Z. Arsenijević, R. Garic-Grulovic, 2009 .

Wall-to-bed heat transfer in vertical hydraulic transport and in particulate fluidized beds

N. Boskovic-Vragolovic, Ž. Grbavčić, Z. Arsenijević, 2008 .

Mass transfer between fluid and immersed surfaces in liquid fluidized beds of coarse spherical inert particles

Ž. Grbavčić, D. Vuković, N. Bošković, 1994 .

20 Liquid and liquid–gas spouting of solids

M. H. Morgan, H. Littman, Ž. Grbavčić, 2011 .

A pseudo-fluid representation of vertical liquid-coarse solids flow

Ž. Grbavčić, Z. Arsenijević, R. Garic-Grulovic, 2005 .

Heat transfer and flow pattern in vertical liquid–solids flow

Ž. Grbavčić, Z. Arsenijević, R. Garic-Grulovic, 2004 .

Hydrodynamic modeling of downward gas–solids flow. Part I: Counter-current flow

Tatjana Kaluđerović Radoičić, Radmila Garic-Grulovic, Zorana Arsenijević, 2014 .

Hydrodynamics of shallow fluidized bed of coarse particles

S. Heinrich, Ž. Grbavčić, Danica V. Brzić, 2005 .

Wall effects on the velocities of a single sphere settling in a stagnant and counter-current fluid and rising in a co-current fluid

N. Boskovic-Vragolovic, Ž. Grbavčić, Z. Arsenijević, 2010 .

Flow regimes for spout‐fluid beds

H. Littman, Zeljko Grbavcic, H. Littman, 1984 .

Analysis of Moisture Transfer During the Drying of Clay Tiles with Particular Reference to an Estimation of the Time-Dependent Effective Diffusivity

Z. Radojević, Ž. Grbavčić, M. Vasić, 2014 .

Calculation of the effective diffusion coefficient during the drying of clay samples

Z. Radojević, Ž. Grbavčić, M. Vasić, 2012 .

Drying of Suspensions in the Draft Tube Spouted Bed

Radmila Garic-Grulovic, Zorana Arsenijević, Zeljko Grbavcic, 2008 .

Pressure drop, bed expansion and liquid holdup in a three phase spouted bed contactor

H. Littman, F. K. Zdanski, Howard Littman, 1974 .

Fluid flow pattern, minimum spouting velocity and pressure drop in spouted beds

H. Littman, F. K. Zdanski, Howard Littman, 1976 .

Hydrodynamic modeling of vertical accelerating gas-solids flow

Željko Grbavčić, R. V. Garić, S. Dj. Jovanović, 1997 .

Determination of non-spherical particle terminal velocity using particulate expansion data

Radmila Garic-Grulovic, Z.Lj. Arsenijevic, Zeljko Grbavcic, 1999 .

Particle characterization of polydisperse quartz filtration sand

Tatjana Kaluđerović Radoičić, Ž. Grbavčić, Mihal Đuriš, 2014 .

Hydrodynamics and Mass Transfer in Heterogeneous Systems

R. Pjanovic, N. Boskovic-Vragolovic, Ž. Grbavčić, 2011 .

Performances of continuous dryer with inert medium fluidized bed

Ž. Grbavčić, Z. Arsenijević, R. Garic-Grulovic, 2008 .

Drying of solutions and suspensions in the modified spouted bed with draft tube

Ž. Grbavčić, Z. Arsenijević, R. Garic-Grulovic, 2002 .

Pressure drop and flowrate characteristics of a liquid phase spout‐fluid bed at the minimum spout‐fluid flowrate

H. Littman, F. K. Zdanski, Howard Littman, 1974 .

A FLUIDIZED BED DRIER FOR SUSPENSIONS AND PASTES

Ž. Grbavčić, Z. Arsenijević, 2000 .

Modeling and measurement of the effective drag coefficient in decelerating and non-accelerating turbulent gas—solids dilute phase flow of large parti

John D. Paccione, M. H. Morgan, H. Littman, 1993 .

An axisymmetric model for fluid flow in the annulus of a spout-fluid bed

M. H. Morgan, H. Littman, Ž. Grbavčić, 1991 .