K. Malaník

发表

Increasing SPD effectiveness by changing deformation process in the first pass through the ECAP die: numerical modelling

S. Rusz, K. Malaník, M. Klos, 2007 .

Refining of structure of the alloy AlMn1Cu with use of multiple severe plastic deformation

S. Rusz, K. Malaník, 2008 .

Using severe plastic deformation to prepare of ultra fine-grained materials by ECAP method

S. Rusz, K. Malaník, 2007 .

Preparation of highly wettable coatings on Ti–6Al–4V ELI alloy for traumatological implants using micro-arc oxidation in an alkaline electrolyte

L. Bačáková, L. Cvrček, Klára Drobikova, 2020, Scientific Reports.

Influence of change of direction of deformation at ECAP technology on achieved UFG in AlMn1Cu alloy

J. Dutkiewicz, L. Čížek, S. Rusz, 2009 .

SEM EBSD and TEM Structure Studies of α-Brass after Severe Plastic Deformation Using Equal Channel Rolling Followed by Groove Pressing

J. Bogucka, J. Dutkiewicz, W. Maziarz, 2012 .

Determination of conditions leading to localized corrosion initiation on UNS S32100 (AISI 321) stainless steels in nuclear power plant environments

Jaroslav Bystrianský, Josef Bárta, M. Tvrdý, 1995 .

Evaluation of DRECE forming process of Cu-based alloys and proposal of testing method for evaluation of UFG materials microstructural stability

S. Rusz, K. Malaník, Vít Michenka, 2010 .

New design of the forming equipment DRECE for obtaining UFG structure in strip of sheet

J. Dutkiewicz, L. Čížek, S. Rusz, 2010 .