S. Ko

发表

Influence of a UV-ozone treatment on amorphous SnO2 electron selective layers for highly efficient planar MAPbI3 perovskite solar cells

Ki Chul Kim, M. Lee, Sang-Geul Lee, 2020 .

Fully solution-processed organic thin-film transistors by consecutive roll-to-roll gravure printing

Wi Hyoung Lee, T. Hassinen, Jaemin Kim, 2017 .

Development of a step drill for minimization of delamination and uncut in drilling carbon fiber reinforced plastics (CFRP)

S. Ko, B. Kwon, Ngoc Dai Duong Mai, 2020 .

Development of a Generating System to Inspect Some Specific Types of Wrinkle

S. Ko, H. P. Hoang, 2010 .

A low-temperature and short-annealing process for metal oxide thin film transistors using deep ultraviolet light for roll-to-roll processing

Wi Hyoung Lee, Jaehak Shin, Jaemin Kim, 2019, Current Applied Physics.

Enhanced Gas Sensing Performance of Organic Field‐Effect Transistors by Modulating the Dimensions of Triethylsilylethynyl‐Anthradithiophene Microcrystal Arrays

Wi Hyoung Lee, J. Anthony, Eunho Lee, 2020, Advanced Materials Interfaces.

Silver film etching processing using the inkjet method for the organic thin film transistor

Wi Hyoung Lee, Jaehak Shin, Jaemin Kim, 2020 .

Novel Intense-pulsed-light synthesis of amorphous SnO2 electron-selective layers for efficient planar MAPbI3 perovskite solar cells

M. Lee, Jaehak Shin, Kyungeun Jung, 2021 .

Sequential manufacturing via intra-additive hybrid materials approach for fully roll-to-roll processed flexible organic thin film transistors

Dongjin Lee, Youngwook Noh, Hakyung Jeong, 2021 .

Enhanced performance and reliability of organic thin film transistors through structural scaling in gravure printing process

Wi Hyoung Lee, Janghoon Park, Jaehak Shin, 2018, Organic Electronics.

Effects of Grain Boundary Density on the Gas Sensing Properties of Triethylsilylethynyl‐Anthradithiophene Field‐Effect Transistors

Ho Won Jang, J. Anthony, Y. Kim, 2018 .

Optimization and improvement of TIPS–pentacene transistors (OTFT) with UV–ozone and chemical treatments using an all-step solution process

Younsu Jung, T. Hassinen, Jaemin Kim, 2015 .

Prediction of shear angle for continuous orthogonal cutting using thermo-mechanical constants of work material and cutting conditions

A. Toropov, S. Ko, 2007 .

Prediction of tool-chip contact length using a new slip-line solution for orthogonal cutting

Sung-Lim Ko, Andrey Toropov, A. Toropov, 2003 .

230 Development of Deburring Technology for Drilling Burrs using Magnetic Abrasive Finishing Method

Y. M. Baron, S. Ko, Jeongwan Chae, 2003 .

Effective Deburring of the Burr at Intersecting Hole by Permanent Magnet Inductor

Y. M. Baron, S. Jo, S. Ko, 2007 .

Micro deburring for precision parts using magnetic abrasive finishing method

Sung-Lim Ko, Y. M. Baron, Yu M. Baron, 2007 .

Development of simulation system for machining process using enhanced Z map model

Sung-Lim Ko, Sang-Kyu Lee, S. Ko, 2002 .

Development of a Software for Effective Cutting Simulation using Advanced Octree Algorithm

Yong-Hyun Kim, Sung-Lim Ko, Trung-Thanh Pham, 2007, 2007 International Conference on Computational Science and its Applications (ICCSA 2007).

A model of burr formation in the feed direction in turning

Andrey Toropov, Sung-Lim Ko, A. Toropov, 2006 .

Experimental study of burrs formed in feed direction when turning aluminum alloy Al6061-T6

Andrey Toropov, Sung-Lim Ko, Byung-Kwon Kim, 2005 .

Burr minimizing scheme in drilling

Sung-Lim Ko, Gyun-Eui Yang, Jae-Eun Chang, 2003 .

Analysis of burr formation in drilling with a new-concept drill

Sung-Lim Ko, Jing-Koo Lee, S. Ko, 2001 .

A mathematical model for simulating and manufacturing ball end mill

Sung-Lim Ko, Hien Nguyen, S. Ko, 2014, Comput. Aided Des..

Practical Design Guidelines for the Development of High-Precision Roll-to-Roll Slot-Die Coating Equipment and the Process

Jongsu Lee, Dongjin Lee, Jaemin Kim, 2016, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Effect of Crystallization Modes in TIPS-pentacene/Insulating Polymer Blends on the Gas Sensing Properties of Organic Field-Effect Transistors

Wi Hyoung Lee, Ho Won Jang, J. Anthony, 2019, Scientific Reports.

Printed polymer and carbon nanotube thin film transistors with high-k barium titanate insulator

T. Hassinen, S. Ko, B. Ahn, 2014 .

Micro Deburring Technology Using Ultrasonic Vibration with Abrasive - eScholarship

Sung-Lim Ko, H Z Choi, Sang-Kyu Lee, 2004 .

R2R gravure and inkjet printed RF resonant tag

Terho Kololuoma, Sung-Lim Ko, Kee-Hyun Shin, 2011 .

Roll-to-Roll Microimprinting Process for Indium Tin Oxide Layer Patterning

Ji-Youp Kim, S. Ko, B. Ahn, 2013 .

New abrasive deburring method using suction for micro burrs at intersecting holes

Sung-Lim Ko, B. C. Kwon, K. H. Kim, 2016 .

Determination of stress state in chip formation zone by central slip-line field

A. Toropov, S. Ko, 2005 .

Burr formation and fracture in oblique cutting

Sung-Lim Ko, David Dornfeld, D. Dornfeld, 1996 .

A study on Burr formation mechanism

David Dornfeld, Sung-Lim Ko, D. Dornfeld, 1991 .

Improvement of the accuracy in the machining of a deep shoulder cut by end milling

Sang-Kyu Lee, Sung-Lim Ko, S. Ko, 2001 .

Development of an Effective Measurement System for Burr Geometry

S. W. Park, S L Ko, S W Park, 2006 .

Measurement and Effective Deburring for the Micro Burrs in Piercing Operation

Sung-Lim Ko, S. Ko, 2000 .

Practical implementation of cutting force model for step drill using 3D CAD data

D. Mai, B. C. Kwon, Sung-Lim Ko, 2019, CIRP Annals.

A New Burr Formation Model for Orthogonal Cutting of Ductile Materials

Sung-Lim Ko, A. A. Toropov, J. M. Lee, 2006 .

Determination of Cutting Conditions for an Efficient Deburring Process Using a New Deburring Tool

Sung-Lim Ko, Jun-Kyung Bae, Ha-Young Park, 2016 .