E. González

发表

A continuum constitutive model for the simulation of fabric-reinforced composites

E. V. González, Pere Maimí, P. Cruz, 2014 .

Nominal strength of quasi-brittle open hole specimens

J. Renart, D. Trias, P. Maimí, 2012 .

A methodology to obtain material design allowables from high-fidelity compression after impact simulations on composite laminates

A. Turón, A. Sasikumar, I. Cózar, 2020 .

Specimen geometry and specimen size dependence of the $${\mathcal {R}}$$R-curve and the size effect law from a cohesive model point of view

D. Trias, P. Maimí, E. González, 2017 .

A three-dimensional plastic-damage model for polymer composite materials

F. Otero, A. Turón, I. Cózar, 2022, Composites Part A: Applied Science and Manufacturing.

Comment to the paper ‘Analysis of Progressive Matrix Cracking in Composite Laminates II. First Ply Failure’ by George J Dvorak and Norman Laws

P. Camanho, P. Maimí, E. González, 2014 .

Measuring fracture energy of interfaces under mode I loading with the wedge driven test

J. Costa, J. Renart, E. González, 2020 .

Simulation of Low-Velocity Impact Damage on Composite Laminates

Z. Gürdal, P. Camanho, P. Maimí, 2009 .

Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations

Zafer Gürdal, Pedro P. Camanho, E. V. González, 2009 .

Characterization of debonding between two different materials with beam like geometries

J. Renart, P. Maimí, E. González, 2021 .

Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of the mismatch angle between plies

E. V. González, Pere Maimí, N. Blanco, 2013 .

Effects of interply hybridization on the damage resistance and tolerance of composite laminates

Pedro P. Camanho, E. V. González, Pere Maimí, 2014 .

Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms

P. Camanho, D. Trias, P. Maimí, 2016 .

Translaminar fracture toughness of interply hybrid laminates under tensile and compressive loads

E. V. González, Pere Maimí, P. Cruz, 2017 .

Scaling effects of composite laminates under out-of-plane loading

A. Wagih, N. Blanco, P. Maimí, 2019, Composites Part A: Applied Science and Manufacturing.

Nominal strength of quasi-brittle open hole specimens under biaxial loading conditions

A. M. Kabeel, N. Gascons, E. V. González, 2013 .

Size Effect Law and Critical Distance Theories to Predict the Nominal Strength of Quasibrittle Structures

N. Gascons, E. V. González, Pere Maimí, 2013 .

Accurate simulation of delamination under mixed-mode loading using a cohesive model with a mode-dependent penalty stiffness

Albert Turon, E. V. González, Pere Maimí, 2018 .

8.8 Analysis of Delamination Damage in Composite Structures Using Cohesive Elements

P. Camanho, A. Turón, E. González, 2018 .

Cohesive zone length of orthotropic materials undergoing delamination

Albert Turon, E. V. González, Pere Maimí, 2016 .

A methodology to simulate low velocity impact and compression after impact in large composite stiffened panels

Pedro P. Camanho, J. A. Mayugo, A. Soto, 2018, Composite Structures.

Low velocity impact and compression after impact simulation of thin ply laminates

E. V. González, Pere Maimí, J. R. Sainz de Aja, 2018, Composites Part A: Applied Science and Manufacturing.

Damage sequence in thin-ply composite laminates under out-of-plane loading

R. Olsson, A. Wagih, N. Blanco, 2016 .

Simulation of drop-weight impact and compression after impact tests on composite laminates

Pedro P. Camanho, Albert Turon, J. A. Mayugo, 2012 .

Damage resistance and damage tolerance of dispersed CFRP laminates: Design and optimization

E. V. González, N. Blanco, T. A. Sebaey, 2013 .

Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of ply clustering

E. V. González, N. Blanco, T. A. Sebaey, 2013 .

Damage resistance and damage tolerance of dispersed CFRP laminates: The bending stiffness effect

E. V. González, N. Blanco, T. A. Sebaey, 2013 .

Experimental study into compression after impact strength of laminates with conventional and nonconventional ply orientations

J. A. Mayugo, E. V. González, G. Guillamet, 2017 .

Unsymmetrical stacking sequences as a novel approach to tailor damage resistance under out-of-plane impact loading

E. V. González, Pere Maimí, D. Trias, 2019, Composites Science and Technology.

Simulating drop-weight impact and compression after impact tests on composite laminates using conventional shell finite elements

P. Cruz, P. Maimí, E. Martín-Santos, 2018, International Journal of Solids and Structures.

Effects of ply clustering in laminated composite plates under low-velocity impact loading

Pedro P. Camanho, E. V. González, Pere Maimí, 2011 .

Keywords : low-velocity impact , damage tolerance , optimization Keywords : low-velocity impact , damage tolerance , optimization

J. Costa, T. Sebaey, N. Blanco, 2022 .

Simulation of delamination by means of cohesive elements using an explicit finite element code

P. Camanho, A. Turón, J. Renart, 2009 .

Net-tension strength of double-lap joints under bearing-bypass loading conditions using the cohesive zone model

A. Kabeel, N. Gascons, P. Maimí, 2015 .

Net-tension strength of double lap joints taking into account the material cohesive law

A. Kabeel, N. Gascons, P. Maimí, 2014 .

Should the translaminar fracture toughness of laminated composites be represented by the R or the J curve? A comparison of their consistency and predictive capability

P. Maimí, E. González, A. Ortega, 2022, Composites Part A: Applied Science and Manufacturing.

Characterization of the translaminar fracture Cohesive Law

E. V. González, Pere Maimí, D. Trias, 2016 .

Compact tension specimen for orthotropic materials

P. Maimí, E. González, A. Ortega, 2014 .

Guided Double Cantilever Beam test method for intermediate and high loading rates in composites

J. Pernas-Sánchez, J. Artero-Guerrero, N. Blanco, 2023, International Journal of Solids and Structures.

Specimen geometry and specimen size dependence of the R\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathcal {R}}$

D. Trias, P. Maimí, E. González, 2017, International Journal of Fracture.

Transition time threshold for Double Cantilever Beam specimens under high loading rates

N. Blanco, E. González, S. Medina, 2021 .