J. Welsh

发表

Comparison of MCT Failure Prediction Techniques and Experimental Verification for Biaxially Loaded Glass Fabric-reinforced Composite Laminates

C. Key, J. Welsh, J. Mayes, 2004 .

THERMAL -MECHANICAL FAILURE ANALYSIS OF CRYOGENIC COMPOSITE MATERIALS USING MULTICONTINUUM THEORY

Kirtland Afb, S. Nickerson, J. Mayes, 2003 .

Thermal-Mechanical Failure Analysis of Composite Cryogenic Materials Using Multi-Continuum Theory

S. Nickerson, J. Welsh, S. Mayes, 2003 .

Achieving Dimensional Stability Using Functional Fillers

B. Henderson, J. Kellar, W. Cross, 2005 .

An Integrated Systematic Approach to Linerless Composite Tank Development

N. Munshi, J. Cronin, S. Arzberger, 2005 .

EXPERIMENTAL AND NUMERICAL FAILURE PREDICTIONS OF BIAXIALLY-LOADED UNIDIRECTIONAL CARBON COMPOSITE LAMINATES

J. Welsh, 2009 .

Recent Advances in Failure Predictions of Composite Laminates Utilizing Multicontinuum Technology

A. Hansen, J. Welsh, J. Mayes, 2008 .

BIAXIAL STRENGTH MEASUREMENTS OF IM7/977-2 CARBON/EPOXY LAMINATES USING TABBED CRUCIFORM SPECIMENS

J. Welsh, J. Ash, 2004 .

An experimental investigation of the biaxial strength of IM6/3501-6 carbon/epoxy cross-ply laminates using cruciform specimens

Donald F. Adams, Jeffry S. Welsh, D. Adams, 2002 .

DAMAGE INITIATION MECHANICS IN GLASS FABRIC COMPOSITES

Kirtland Afb, C. Key, J. Welsh, 2002 .

Biaxial and Triaxial Failure Strengths of 6061-T6 Aluminum and AS4/3501-6 Carbon/Epoxy Laminates Obtained by Testing Thickness-Tapered Cruciform Specimens

D. Adams, J. Welsh, 2001 .

Finite Element Methods for the Frequency Response Prediction of Bonded Composite Structures

Jeffry S. Welsh, Eric P. Kasper, E. Kasper, 2003 .

Prediction of Pressure Cycle Induced Microcrack Damage in Linerless Composite Tanks

B. Arritt, N. Munshi, J. Cronin, 2006 .

Reinforced membrane based on crosslink reaction between water soluble sulfonated carbon nanotubes and sulfonated polystyrene

Jeffry S. Welsh, Haiping Hong, Ying Dai, 2008, NanoScience + Engineering.

THE EFFECT OF ADHESIVE BOND THICKNESS AND MATERIAL TYPE ON STRUCTURE STIFFNESS

Kirtland Afb, Jeffry S. Welsh, Kirtland Afb, 2002 .

2-D biaxial testing and failure predictions of IM7/977-2 carbon/epoxy quasi-isotropic laminates

Adam C. Biskner, Jeffry S. Welsh, J. Steven Mayes, 2006 .

Testing of angle-ply laminates to obtain unidirectional composite compression strengths

D. Adams, J. Welsh, 1997 .

Mechanical properties of epoxy nanocomposites reinforced with very low content of amino-functionalized single-walled carbon nanotubes

Yun Zhao, Jeffry S. Welsh, Haiping Hong, 2009, NanoScience + Engineering.

Development of an electromechanical triaxial test facility for composite materials

D. F. Adams, J. S. Welsh, D. Adams, 2000 .

A Multiscale Approach to the Effects of Cryogenic Environments on Polymer Matrix Composites

S. Nickerson, J. Mayes, J. Welsh, 2004 .

Fiber print-through mitigation technique for composite mirror replication

Arup K. Maji, Jeffry S. Welsh, Jacob D. Hochhalter, 2006 .

Development of a novel, passively deployed roll-out solar array

J.S. Welsh, R. Barrett, M.S. Lake, 2006, 2006 IEEE Aerospace Conference.

Development of a Passively Deployed Roll-Out Solar Array

Robert Taylor, Mark Lake, Erik Abrahamson, 2006 .

EXPERIMENTAL AND NUMERICAL FAILURE PREDICTIONS OF BIAXIALLY-LOADED QUASI-ISOTROPIC CARBON COMPOSITES

Adam C. Biskner, J. Welsh, J. Mayes, 2007 .

An Experimental Investigation of the Mini-Sandwich Laminate as Used to Obtain Unidirectional Composite Compression Strengths

D. Adams, J. Welsh, 1997 .

Multi-continuum analysis of thermally induced matrix cracking

Jeffry S. Welsh, J. Steven Mayes, Seth Nickerson, 2005 .

Modeling matrix failure in composites due to cryogenic temperatures

J.S. Welsh, S. Nickerson, J.S. Mayes, 2004, 2004 IEEE Aerospace Conference Proceedings (IEEE Cat. No.04TH8720).