Y. Kazemi

发表

Mechanical performance of polyethylene (PE)-based biocomposites

D. Rodrigue, A. Cloutier, A. Kakroodi, 2015 .

Mechanical and morphological properties of wood plastic composites based on municipal plastic waste

D. Rodrigue, A. Cloutier, Y. Kazemi, 2013 .

Design analysis of three-layered structural composites based on post-consumer recycled plastics and wood residues

D. Rodrigue, A. Cloutier, Y. Kazemi, 2013 .

Effect of conductive particles on the mechanical, electrical, and thermal properties of maleated polyethylene

D. Rodrigue, A. Kakroodi, Y. Kazemi, 2015 .

Tailoring poly(lactic acid) for packaging applications via the production of fully bio-based in situ microfibrillar composite films

Chul B. Park, M. Nofar, A. Kakroodi, 2017 .

Poly(lactic acid)-Based in Situ Microfibrillar Composites with Enhanced Crystallization Kinetics, Mechanical Properties, Rheological Behavior, and Foaming Ability.

Chul B. Park, A. Kakroodi, Y. Kazemi, 2015, Biomacromolecules.

A facile method to increase the charge storage capability of polymer nanocomposites

Chul B. Park, P. Pötschke, A. Ameli, 2015 .

Studying the Effects of Polymer Crystallization and Blending on Conductive Network Formation in CNT-Based Conductive Polymer Composites

Y. Kazemi, 2018 .

Conductive network formation and destruction in polypropylene/carbon nanotube composites via crystal control using supercritical carbon dioxide

Chul B. Park, P. Pötschke, A. Ameli, 2017 .

Enhancing the electrical conductivity of PP/CNT nanocomposites through crystal-induced volume exclusion effect with a slow cooling rate

Chul B. Park, P. Pötschke, Jun Wang, 2020, Composites Part B: Engineering.

Modelling of Rod-Like Fillers’ Rotation and Translation near Two Growing Cells in Conductive Polymer Composite Foam Processing

Chul B. Park, H. Naguib, A. Ameli, 2018, Polymers.

Facile production of biodegradable PCL/PLA in situ nanofibrillar composites with unprecedented compatibility between the blend components

Chul B. Park, D. Rodrigue, A. Kakroodi, 2018, Chemical Engineering Journal.

IMPACT MODIFICATION OF WASTE PLASTIC / WOOD FLOUR COMPOSITES VIA STRUCTURAL MODIFICATION

D. Rodrigue, A. Kakroodi, Y. Kazemi, 2013 .

Synergism between carbon materials and Ni chains in flexible poly(vinylidene fluoride) composite films with high heat dissipation to improve electromagnetic shielding properties

Chul B. Park, Ruosong Li, S. Hamidinejad, 2018 .

A versatile foaming platform to fabricate polymer/carbon composites with high dielectric permittivity and ultra-low dielectric loss

Chul B. Park, Ruosong Li, Biao Zhao, 2019, Journal of Materials Chemistry A.

Mechanical, rheological, morphological and water absorption properties of maleated polyethylene/hemp composites: Effect of ground tire rubber addition

D. Rodrigue, A. Kakroodi, Y. Kazemi, 2013 .

Effects of polymer-filler interactions on controlling the conductive network formation in polyamide 6/multi-Walled carbon nanotube composites

Chul B. Park, L. Mark, T. Filleter, 2019, Polymer.

Mechanical and morphological characterization of wood plastic composites based on municipal plastic waste

Y. Kazemi, 2013 .

Process-microstructure-electrical conductivity relationships in injection-molded polypropylene/carbon nanotube nanocomposite foams

Chul B. Park, Amir Ameli, Petra Pötschke, 2017 .

Compatibilization efficiency in post-consumer recycled polyethylene/polypropylene blends: Effect of contamination

Denis Rodrigue, D. Rodrigue, Yasamin Kazemi, 2015 .

Highly stretchable conductive thermoplastic vulcanizate/carbon nanotube nanocomposites with segregated structure, low percolation threshold and improved cyclic electromechanical performance

Chul B. Park, A. Ameli, T. Filleter, 2018 .

Influence of hygrothermal conditioning on the chemical structure and thermal mechanical properties of aliphatic polyketone

Marcus P. Heydrich, H. Naguib, Bo Xu, 2020 .

Role of interfacial adhesion and fiber length on the mechanical performance fiber reinforced thermoplastic elastomers

Marcus P. Heydrich, H. Naguib, A. Hammami, 2021 .

Fiber-matrix adhesion between high-density polyethylene and carbon fiber

Marcus P. Heydrich, H. Naguib, A. Hammami, 2022, Polymer Testing.

Influence of Flash Graphene on the acoustic, thermal, and mechanical performance of flexible polyurethane foam

H. Naguib, Y. Kazemi, Sophie Kiddell, 2023, Polymer Testing.