Kun-Jhih Lin

发表

Change in collateral ligament length and tibiofemoral movement following joint line variation in TKA

Hung-Wen Wei, Chang-Hung Huang, Cheng-Kung Cheng, 2016, Knee Surgery, Sports Traumatology, Arthroscopy.

Mimicking anatomical condylar configuration into knee prosthesis could improve knee kinematics after TKA - a computational simulation.

Cheng-Kung Cheng, Chun‐Hsiung Huang, Colin Mcclean, 2012, Clinical biomechanics.

Larger screw diameter may not guarantee greater pullout strength for headless screws – a biomechanical study

Cheng-Lun Tsai, Kang-Ping Lin, Hung-Wen Wei, 2017, Biomedizinische Technik. Biomedical engineering.

Patellofemoral kinematics during deep knee flexion after total knee replacement: a computational simulation

Chen-Sheng Chen, Chang-Hung Huang, Cheng-Kung Cheng, 2014, Knee Surgery, Sports Traumatology, Arthroscopy.

Conceptual finite element study for comparison among superior, anterior, and spiral clavicle plate fixations for midshaft clavicle fracture.

Kang-Ping Lin, Hung-Wen Wei, Cheng-Lun Tsai, 2016, Medical engineering & physics.

A novel low-profile external skeletal fixator for type IIIB open tibial fractures: A biomechanical and clinical pilot study

Hung-Wen Wei, Yi-ping Yang, K. Lin, 2021, Journal of the Chinese Medical Association : JCMA.

Importance of a moderate plate-to-bone distance for the functioning of the far cortical locking system.

Kang-Ping Lin, Hung-Wen Wei, Ming-Chau Chang, 2018, Medical engineering & physics.

Finite element analysis of coronoid prostheses with different fixation methods in the treatment of comminuted coronoid process fracture

Kun-Jhih Lin, Po-Yi Liu, Hailong Zhang, 2022, Journal of Orthopaedics and Traumatology.

Biomechanical Comparison of a Novel Implant and Commercial Fixation Devices for AO/OTA 43-C1 Type Distal Tibial Fracture

Kang-Ping Lin, Chao-Ping Chen, Cheng-Min Shih, 2021, Applied Sciences.

Advantage of Multi-Directional Stability of Spiral Clavicle Plate in Treatment of Middle One-Third Clavicle Fracture: A Finite Element Study

Kang-Ping Lin, Hung-Wen Wei, Cheng-Lun Tsai, 2021, Journal of Medical and Biological Engineering.

Biomechanical effect of the configuration of screw hole style on locking plate fixation in proximal humerus fracture with a simulated gap: A finite element analysis.

Cheng-Lun Tsai, Kun-Jhih Lin, Kang-Ping Lin, 2016, Injury.

Partially threaded headless screw may benefit adequate interfragmentary compression and reduced driving torque for small bone fixation

Kang-Ping Lin, Hung-Wen Wei, Chen-chiang Lin, 2018, Journal of orthopaedic surgery.

Proximal Femoral Morphology and the Relevance to Design of Anatomically Precontoured Plates: A Study of the Chinese Population

Kang-Ping Lin, Hung-Wen Wei, Cheng-Lun Tsai, 2014, TheScientificWorldJournal.

Influence of post-cam design of posterior stabilized knee prosthesis on tibiofemoral motion during high knee flexion.

Chang-Hung Huang, Cheng-Kung Cheng, Tsung-Wei Chang, 2011, Clinical biomechanics.

Biomechanical evaluation of proximal tibial behavior following unicondylar knee arthroplasty: modified resected surface with corresponding surgical technique.

Chang-Hung Huang, Cheng-Kung Cheng, Tsung-Wei Chang, 2011, Medical engineering & physics.

Prediction of the Size of the Fragment in Comminuted Coronoid Fracture Using the Contralateral Side: An Analysis of Similarity of Bilateral Ulnar Coronoid Morphology

Kun-Jhih Lin, Yi Lu, Hailong Zhang, 2020, Orthopaedic surgery.

Biomechanical comparison of conventional and anatomical calcaneal plates for the treatment of intraarticular calcaneal fractures – a finite element study

Kang-Ping Lin, Hung-Wen Wei, Cheng-Lun Tsai, 2016, Computer methods in biomechanics and biomedical engineering.

Anatomic-like polyethylene insert could improve knee kinematics after total knee arthroplasty--a computational assessment.

Chang-Hung Huang, Cheng-Kung Cheng, Tsung-Wei Chang, 2011, Clinical biomechanics.

Biomechanical Evaluation of a Fin-type Implant Compared to Traditional Buttress Plate for the Stabilization of the Posteromedial Fragment in Tibial Plateau Split Fractures

Kang-Ping Lin, Yin-Chih Fu, Jian-Chih Chen, 2021, Journal of Medical and Biological Engineering.

Biomechanical superiority of locking plate designed with cluster of head screws compared to conventional buttress plate for fixation of posteromedial tibial plateau fractures: A computational assessment

Hung-Wen Wei, K. Lin, Y. Tarng, 2022, Journal of Medical and Biological Engineering.

A Locking Plate Designed With Cluster of Head Screws Would Be Biomechanically Superior Than Conventional Buttress Plate For The Fixation of Posteromedial Tibial Plateau Fractures: A Computational Assessment

Hung-Wen Wei, K. Lin, Y. Tarng, 2021 .

Biomechanical effect of different femoral neck blade position on the fixation of intertrochanteric fracture: a finite element analysis

Cheng-Lun Tsai, Jin-Jia Hu, Kun-Jhih Lin, 2016, Biomedizinische Technik. Biomedical engineering.

Morphometric Analysis of the Clavicles in Chinese Population

Kang-Ping Lin, Hung-Wen Wei, Cheng-Lun Tsai, 2017, BioMed research international.

Concave polyethylene component improves biomechanical performance in lumbar total disc replacement--modified compressive-shearing test by finite element analysis.

Chang-Hung Huang, Cheng-Kung Cheng, Tsung-Wei Chang, 2012, Medical engineering & physics.

Biomechanical Considerations in the Design of High-Flexion Total Knee Replacements

Chang-Hung Huang, Cheng-Kung Cheng, Colin Mcclean, 2014, TheScientificWorldJournal.

Should Plate-Bone Gap be Preserved in Far-Cortical Locking Technique? A Biomechanical Study

Chen-chiang Lin, Chao-Ping Chen, Fuu-Cheng Jiang, 2022, Journal of Medical and Biological Engineering.

Effect of semi-rigid locking screws on the stiffness of a fracture-fixation construct: A conceptual finite-element study

Kang-Ping Lin, Hung-Wen Wei, Xiao-hua Pan, 2019, Advances in Mechanical Engineering.