B. Fedulov

发表

Nonlinear anisotropic elasticity for laminate composites

E. Lomakin, B. Fedulov, 2015 .

Strength Analysis and Process Simulation of Subway Contact Rail Support Bracket of Composite Materials

A. Safonov, I. Sergeichev, B. Fedulov, 2016, Applied Composite Materials.

Residual stresses near the free edge of composite materials

E. Lomakin, B. Fedulov, D. Bondarchuk, 2022, Acta Mechanica.

Three-Dimensional constitutive equations for hyper viscoelastic particulate reinforced composite materials based on damage parameter

I. Hariton, F. Assous, B. Fedulov, 2021 .

High rate damage of composite material for modelling of energy absorbing structures

E. Lomakin, B. Fedulov, A. Fedorenko, 2020 .

Residual strength estimation of composite three-stringer panel subjected to low-velocity impact

S. Dubinskii, E. Lomakin, B. Fedulov, 2021, 29TH RUSSIAN CONFERENCE ON MATHEMATICAL MODELLING IN NATURAL SCIENCES.

Nonlinear shear behavior and failure of composite materials under plane stress conditions

A. Safonov, E. Lomakin, B. Fedulov, 2017 .

Influence of manufacturing process on the strength of composite materials

B. Fedulov, A. Fedorenko, D. Bondarchuk, 2019, Procedia Manufacturing.

Residual stresses near the free edge of composite materials

E. Lomakin, B. Fedulov, D. Bondarchuk, 2022, Acta Mechanica.

The effect of residual stress induced by manufacturing on strength on free edge of carbon-epoxy composite with [00/900]n layup

B. Fedulov, A. Fedorenko, D. Bondarchuk, 2019, Procedia Structural Integrity.

MODELING OF THERMOPLASTIC COMPOSITES SOLIDIFICATION AND ESTIMATION OF RESIDUAL STRESSES

S. Lomov, B. Fedulov, M. M. Kantor, 2017 .

PROCESS MODELING OF CARBON-EPOXY COMPOSITES: RESIDUAL STRESS DEVELOPMENT DURING CURE AND ANALYSIS OF FREE EDGE EFFECTS

B. Fedulov, D. Bondarchuk, 2019, Aviation.

Anisotropy of Mechanical Properties and Residual Stress in Additively Manufactured 316L Specimens

I. Akhatov, S. Evlashin, Y. Kuzminova, 2021, Materials.

SIMULATING AN IMPACT ON COMPOSITE DAMPING ELEMENTS

E. Lomakin, B. Fedulov, A. Fedorenko, 2021, Journal of Applied Mechanics and Technical Physics.

Strain rate influence on hardening and damage characteristics of composite materials

E. Lomakin, B. Fedulov, A. Fedorenko, 2020, Acta Mechanica.

Failure analysis of laminated composites based on degradation parameters

A N Fedorenko, B. N. Fedulov, M. M. Kantor, 2018 .

Failure analysis of laminated composites based on degradation parameters

E. Lomakin, B. Fedulov, A. Fedorenko, 2017, Meccanica.

Optimization of parts manufactured using continuous fiber three-dimensional printing technology

B. Fedulov, A. Fedorenko, F. Antonov, 2021, Composites Part B: Engineering.

Residual strength estimation of a laminated composite with barely visible impact damage based on topology optimization

B. Fedulov, A. Fedorenko, 2020 .

Failure analysis of composite materials subjected to low-velocity impact

A N Fedorenko, B. N. Fedulov, B. Fedulov, 2019, Procedia Manufacturing.

The analysis of the worst-case distribution of the damage in composite material imposed by a low velocity impact

B. Fedulov, A. Fedorenko, 2019, Procedia Structural Integrity.

Failure analysis of laminated composites with shear nonlinearity and strain-rate response

A N Fedorenko, B. N. Fedulov, Evgeny Lomakin, 2019, Procedia Structural Integrity.

Nonlinear shear behavior and failure of composite materials under plane stress conditions

A. Safonov, E. Lomakin, B. Fedulov, 2017, Acta Mechanica.

Nonlinear Effects in the Behavior and Fracture of Composite Materials

E. Lomakin, B. Fedulov, A. Fedorenko, 2019, IOP Conference Series: Materials Science and Engineering.

Nonlinear anisotropic elasticity for laminate composites

E. Lomakin, B. Fedulov, 2015, Meccanica.

Modelling of thermoplastic polymer failure in fiber reinforced composites

A. Safonov, S. Lomov, B. Fedulov, 2017 .

Residual strength estimation of a laminated composite with barely visible impact damage based on topology optimization

B. Fedulov, A. Fedorenko, 2020, Structural and Multidisciplinary Optimization.

Evaluation of the Residual Strength of Structures Made of Composite Materials Based on a Conservative Distribution of Damage Parameters

E. Lomakin, B. Fedulov, A. Fedorenko, 2019, IOP Conference Series: Materials Science and Engineering.

Constitutive material model for the design and virtual testing of pressure vessel service equipment manufactured from thermoplastic fiber-reinforced polymer composites

I. Akhatov, I. Sergeichev, E. Lomakin, 2021 .

Effect of elastic properties dependence of the stress state in composite materials

B. Fedulov, A. Fedorenko, 2018, Aerospace Systems.

Effect of elastic properties dependence of the stress state in composite materials

B. Fedulov, A. Fedorenko, 2018, Aerospace Systems.

Simulation of impact failure of tubular samples made of composite material, depending on the loading rate

E. Lomakin, B. Fedulov, A. Fedorenko, 2021, PNRPU Mechanics Bulletin.

Constitutive Models for Anisotropic Materials Susceptible to Loading Conditions

E. Lomakin, B. Fedulov, A. Melnikov, 2014 .

BUCKLING PROBLEM OF COMPOSITE THIN-WALLED STRUCTURES WITH PROPERTIES DEPENDENT ON LOADING TYPES

E. Lomakin, B. Fedulov, A. Fedorenko, 2019, PNRPU Mechanics Bulletin.

Plane strain extension of a strip made of a material with stress state type dependent properties and weakened by cuts with circular base

E. Lomakin, B. Fedulov, 2013 .

The limit plastic state of a holed strip made of a dilatant material

B. Fedulov, 2007 .

The Effect of Fiber Waviness on the Stiffness of a Polymer Composite Material

E. Lomakin, B. Fedulov, D. Bondarchuk, 2024, Mechanics of Composite Materials.

Longitudinal elastic nonlinearity of composite material

B. Fedulov, D. Bondarchuk, Evgeny Lomakin, 2023, Frattura ed Integrità Strutturale.