Jing Qian

发表

Samarium and yttrium codoped BaCeO₃ proton conductor with improved sinterability and higher electrical conductivity.

Wei Liu, Wenping Sun, Zhongtao Wang, 2014, ACS applied materials & interfaces.

Improved performance of solid oxide fuel cell with pulsed laser deposited thin film ceria–zirconia bilayer electrolytes on modified anode substrate

Wei Liu, Zhiwen Zhu, Jing Qian, 2013 .

Chemically stable BaZr0.7Pr0.1Y0.2O3-δ-BaCe0.8Y0.2O3-δ bilayer electrolyte for intermediate temperature solid oxide fuel cells

Wei Liu, Wenping Sun, Z. Tao, 2015 .

Fabrication and performance of BaCe0.8Y0.2O3−δ–BaZr0.8Y0.2O3−δ bilayer electrolyte for anode-supported solid oxide fuel cells

Wei Liu, Wenping Sun, Jing Qian, 2014 .

A stable BaCe0.7Ta0.1In0.2O3−δ electrolyte membrane for proton-conducting solid oxide fuel cells

Wei Liu, Zhiwen Zhu, Jing Qian, 2013 .

In-situ formed Ce0.8Sm0.2O2−δ@Ba(Ce, Zr)1−x(Sm, Y)xO3−δ core/shell electron-blocking layer towards Ce0.8Sm0.2O2−δ-based solid oxide fuel cells with high open circuit voltages

Wei Liu, Wenping Sun, Zhongtao Wang, 2014 .

Improved performance of ceria-based solid oxide fuel cell using doped LaGaO3 films deposited by pulsed laser deposition

Wei Liu, Zhiwen Zhu, Jing Qian, 2014 .

A novel composite cathode Er0.4Bi1.6O3–Pr0.5Ba0.5MnO3−δ for ceria-bismuth bilayer electrolyte high performance low temperature solid oxide fuel cells

L. Bi, Wei Liu, Zhiwen Zhu, 2016 .

Study on new BaCe0.7In0.3O3−δ–Gd0.1Ce0.9O2−δ composite electrolytes for intermediate-temperature solid oxide fuel cells

Wei Liu, Zhongtao Wang, Zhiwen Zhu, 2015 .

Surface modification-based three-phase nanocomposites with low percolation threshold for optimized dielectric constant and loss

W. Nie, Zhongqian Song, Xianyou Wu, 2017 .

Enhancing conjugation degree and interfacial interactions to enhance dielectric properties of noncovalent functionalized graphene/poly (vinylidene fluoride) composites

W. Nie, Xianghai Ran, Zhongqian Song, 2019, Carbon.

A low-cost processing of CuIn(Se_xSi_1-x)_2 films: Using sulfides nanoparticle precursors

G. Jiang, Guilin Chen, Jing Qian, 2012 .

Two-stage ratiometric fluorescent responsive probe for rapid glutathione detection based on BODIPY thiol-halogen nucleophilic mono- or disubstitution

Ting Cao, Anam Iqbal, Weisheng Liu, 2018 .

Synthesis of Red-Emitting CaAlSiN3:Eu2+ Phosphors through a Cost-Effective Synthetic Route

Xin Xu, Weihua Hu, Chao Cai, 2014 .

A new cobalt-free proton-blocking composite cathode La2NiO4+δ–LaNi0.6Fe0.4O3−δ for BaZr0.1Ce0.7Y0.2O3−δ-based solid oxide fuel cells

Zhiwen Zhu, Wei Liu, Jing Qian, 2014 .

High-performance anode-supported solid oxide fuel cells based on nickel-based cathode and Ba(Zr0.1Ce0.7Y0.2)O3−δ electrolyte

Zhiwen Zhu, Wei Liu, Jing Qian, 2013 .

The effect of oxygen transfer mechanism on the cathode performance based on proton-conducting solid oxide fuel cells

Lei Bi, Wei Liu, Jing Qian, 2015 .

Multilayer-structured transparent MXene/PVDF film with excellent dielectric and energy storage performance

W. Nie, Xianghai Ran, Zhongqian Song, 2019, Journal of Materials Chemistry C.

Carbon-doped inorganic nanoassemblies as fillers to tailor the dielectric and energy storage properties in polymer-based nanocomposites

Jingjing Xu, W. Nie, Xianghai Ran, 2020 .

Catalytic performance of a highly enantioselective (R)-ester hydrolase from a new isolate Acinetobacter sp. CGMCC 0789

Jian‐He Xu, Jing Qian, 2004 .

Performance improvement of ceria-based solid oxide fuel cells with yttria-stabilized zirconia as an electronic blocking layer by pulsed laser deposition

Wei Liu, Jing Qian, Wei Liu, 2013 .

Photonic crystal encoded microcarriers for biomaterial evaluation.

Wei Liu, Zhongze Gu, Luoran Shang, 2014, Small.

High performance ceria–bismuth bilayer electrolyte low temperature solid oxide fuel cells (LT-SOFCs) fabricated by combining co-pressing with drop-coating

Zhiwen Zhu, Lei Bi, Wei Liu, 2015 .

Analyses of a cantilever-beam based instrument for evaluating the development of polymerization stresses.

J. Antonucci, J. Dunkers, M. Chiang, 2011, Dental materials : official publication of the Academy of Dental Materials.

Structural engineering of covalent organic frameworks comprising two electron acceptors improves its photocatalytic performance.

W. Qin, A. Iqbal, Jing Qian, 2021, ChemSusChem.

Enhancing released electrical energy density of poly(vinylidene fluoride-co-trifluoroethylene)-graft-poly(methyl methacrylate) via the pre-irradiation method

W. Nie, Xianghai Ran, Xianyou Wu, 2019, Applied Surface Science.

Fabrication of (Sm, Ce)O2−δ interlayer for yttria-stabilized zirconia-based intermediate temperature solid oxide fuel cells

Wei Liu, Jing Qian, Jie Hou, 2015 .

Largely enhanced dielectric and thermal conductive properties of novel ternary composites with small amount of nanofillers

W. Nie, Zhongqian Song, J. Qian, 2018, Composites Science and Technology.