G. Steenackers

发表

Excitation Source Optimisation for Active Thermography

Bart Ribbens, Simon Verspeek, J. Peeters, 2018 .

Defining geometrical position information of a thermal camera and object curvatures using thermography

Joris J.J. Dirckx, G. Steenackers, J. Peeters, 2016 .

Updating a finite element model to the real experimental setup by thermographic measurements and adaptive regression optimization

Bart Ribbens, G. Steenackers, Joris J.J. Dirckx, 2015 .

Hydronic design of cogeneration in collective residential heating systems: state-of-the-art, comparison and improvements

Ivan Verhaert, G. Steenackers, Freek Van Riet, 2019 .

IR Reflectography and Active Thermography on Artworks: The Added Value of the 1.5–3 µm Band

Koen Janssens, Clemente Ibarra-Castanedo, Stefano Sfarra, 2018 .

Estimation of multi-input multi-output linear time-periodic models using a left matrix fraction description

Rik Pintelon, Steve Vanlanduit, G. Steenackers, 2016 .

Determination of stratospheric component behaviour using Finite Element model updating

G. Steenackers, Joris J.J. Dirckx, J. Peeters, 2016 .

On the use of transmissibility measurements for finite element model updating

Christof Devriendt, Patrick Guillaume, G. Steenackers, 2007 .

Optimised dynamic line scan thermographic detection of CFRP inserts using FE updating and POD analysis

Stefano Sfarra, Y. Mokhtari, Clemente Ibarra-Castanedo, 2018 .

From operating deflection shapes towards mode shapes using transmissibility measurements

Christof Devriendt, Patrick Guillaume, G. Steenackers, 2010 .

Time calibration of thermal rolling shutter infrared cameras

Steve Vanlanduit, G. Steenackers, Daniël De Greef, 2017 .

Active thermography setup updating for NDE: a comparative study of regression techniques and optimisation routines with high contrast parameter influences for thermal problems

Joris J.J. Dirckx, Boris Bogaerts, Seppe Sels, 2017, Optimization and Engineering.

From thermal inspection to updating a numerical model of a race bicycle

Bart Ribbens, G. Steenackers, E. Louarroudi, 2016 .

Exploring the novel software Hysopt : a comparison of hydronic heat distribution systems of an apartment building

Ivan Verhaert, G. Steenackers, Freek Van Riet, 2016 .

Parameter estimation from thermographic measurements by finite element updating of standard heat problem

Joris J.J. Dirckx, G. Steenackers, J. Peeters, 2016 .

4D Active and passive thermography measurement system using a KUKA KR16 robot and time-of-flight imaging

Bart Ribbens, Boris Bogaerts, Seppe Sels, 2016 .

From Thermal Inspection to Updating a Numerical Model of a Race Bicycle: Comparison with Structural Dynamics Approach

Bart Ribbens, Simon Verspeek, J. Peeters, 2018 .

Determining the power flow in a rectangular plate using a generalized two-step regressive discrete fourier series

Steve Vanlanduit, Patrick Guillaume, Flavio Presezniak, 2012 .

Decoupling of mechanical systems : the link-preserving, decoupling method

Patrick Guillaume, Rudi Penne, G. Steenackers, 2014 .

Determining directional emissivity: Numerical estimation and experimental validation by using infrared thermography

Joris J.J. Dirckx, Bart Ribbens, G. Steenackers, 2016 .

Ultrasonic characterization of materials by means of under water Laser Doppler Vibrometer measurements of continuous waves

Steve Vanlanduit, Patrick Guillaume, Roberto Longo, 2010 .

Robust quantitative depth estimation on CFRP samples using active thermography inspection and numerical simulation updating

Xavier Maldague, Joris J.J. Dirckx, Clemente Ibarra-Castanedo, 2017 .

Development of a regressive finite element model optimization technique making use of transmissibilities

Steve Vanlanduit, Patrick Guillaume, G. Steenackers, 2009 .

Finite element optimization by pulsed thermography with adaptive response surfaces.

Joris J.J. Dirckx, Bart Ribbens, G. Steenackers, 2014 .