Tsuyoshi Inoue

发表

Effects of Silicon and Manganese Addition on Mechanical Properties of High-strength Hot-rolled Sheet Steel Containing Retained Austenite

Hashimoto Shunichi, I. Tsukatani, Tsuyoshi Inoue, 1991 .

The Effects of Phosphorus Segregation at Grain Boundaries and Boron Addition on the Impact Toughness of Medium Carbon Tempered Martensite Steels with 150 kgf/mm2 Strength Level

Tsuyoshi Inoue, Y. Namba, 1991 .

Three Stages of Ductile Fracture Process and Criteria of Void Initiation in Spheroidized and Ferrite/Pearlite Steels

Tsuyoshi Inoue, S. Kinoshita, 1977 .

Microstructure and Mechanical Properties of Bainite Containing Martensite and Retained Austenite in Low Carbon HSLA Steels

Tsutomu Tanaka, Tsuyoshi Inoue, M. Katsumata, 1991 .

EFFECT OF CARBURIZING AFTER RECRYSTALLIZATION ON FORMABILITY AND BAKE HARDENABILITY OF ULTRA LOW CARBON TI-ADDED COLD-ROLLED SHEET STEELS

M. Kitamura, I. Tsukatani, Tsuyoshi Inoue, 1994 .

Relation between Fine Ferrite-Pearlite Microstructure Produced by Controlled Rolling and Cooling and the Subsequent Rapid Spheroidization of Medium Carbon Steel

Tsuyoshi Inoue, M. Katsumata, Y. Kanetsuki, 1990 .

Strain Partitioning and Void Formation in Ferrite-Pearlite Steels Deformed in Tension

Tsuyoshi Inoue, S. Kinoshita, 1977 .

Shape Change of Sulphide Inclusions during Hot Bar Forging and Cold Wire Drawing and Its Influence on Mechanical Properties of High Carbon Steels

Tsuyoshi Inoue, S. Kinoshita, Takada Hisashi, 1980 .

Effect of Chemical Composition on Recrystallization Behavior and r-value in Ti-added Ultra Low Carbon Sheet Steel.

Tadashi Saito, R. Yoda, I. Tsukatani, 1994 .

Toughness and Ductility of a Characteristic Structure in Isothermally Transformed Molybdenum Steel

Tsuyoshi Inoue, S. Kinoshita, 1976 .

A New Tempering Parameter and Its Application to the Integration of Tempering Effect of Continuous Heat Cycle

Tsuyoshi Inoue, 1980 .

Observations of Ductile Fracture Processes and Criteria of Void Initiation in Spheroidized and Ferrite/Pearlite Steels

Tsuyoshi Inoue, S. Kinoshita, 1976 .

Prediction of Microstructure Distribution in the Through-thickness Direction during and after Hot Rolling in Carbon Steels

Mitsuru Kitamura, Tsuyoshi Inoue, Maeda Yasushi, 1992 .

Effect of Laser Surface Modification on the Microstructure and the Wear Properties of Ni-Cr-Mo-B Alloy

Tsuyoshi Inoue, T. Soshiroda, 1991 .

Development of Cold Rolling Mill Rolls of High Speed Steel Type by Using Continuous Pouring Process for Cladding

Tsuyoshi Inoue, Hashimoto Mitsuo, Taku Tanaka, 2002 .

Deboronization in Boron Steel and a Model for Its Calculation

Tsuyoshi Inoue, Kunio Tsuji, Yoshitaka Ochida, 1983 .

The Effect of Degree of Spheroidization on the Cold Forgeability of Steel

Tsuyoshi Inoue, S. Kinoshita, Yoshitaka Ochida, 1975 .