Man Wang

发表

Asymmetrical Precipitation on the {10-12} Twin Boundary in the Magnesium Alloy

Zhang-Zhi Shi, Leng Chen, P. Yang, 2018, Metallurgical and Materials Transactions A.

Low voltage and hysteresis-free blue phase liquid crystal dispersed by ferroelectric nanoparticles

Haifeng Yu, Zhangjian Zhou, Yunfeng Lu, 2012 .

Effect of Thermomechanical Parameters on Σ3n Grain Boundaries and Grain Boundary Networks of a New Superaustenitic Stainless Steel

Zhangjian Zhou, Man Wang, Hongying Sun, 2014 .

High resolution neutron diffraction crystallographic investigation of Oxide Dispersion Strengthened steels of interest for fusion technology

J. Rodríguez-Carvajal, Zhangjian Zhou, R. Coppola, 2014 .

Effect of oxygen on corrosion of an alumina-forming duplex steel in static liquid lead-bismuth eutectic at 550 °C

Zhangjian Zhou, C. Schroer, V. Tsisar, 2021, Corrosion Science.

Microstructure and mechanical property evolution of an AFA alloy with simple composition design during ageing at 700 °C

Zhangjian Zhou, H. Che, Hao Dong, 2020 .

Investigation of microstructure and liquid lead corrosion behavior of a Fe-18Ni-16Cr-4Al base alumina-forming austenitic stainless steel

Zhangjian Zhou, C. Schroer, V. Tsisar, 2020, Materials Research Express.

Experimental Study on Mechanical Properties and Micro-Mechanism of All-Solid-Waste Alkali Activated Binders Solidified Marine Soft Soil

J. Yang, Man Wang, Yanqiu Wu, 2021 .

Long-term thermal-aging stability of a 16Cr-oxide dispersion strengthened ferritic steel at 973 K

Zhangjian Zhou, Shaofu Li, M. Q. Wang, 2016 .

Microstructure characterization and tensile properties of 18Cr-4Al-oxide dispersion strengthened ferritic steel

Zhangjian Zhou, Shaofu Li, Guangming Zhang, 2015 .

Corrosion behavior of a 14Cr-ODS steel in supercritical water

Zhangjian Zhou, Shaofu Li, Le-fu Zhang, 2013 .

Electrochemical preparation of W coatings in Na2WO4-WO3-ZrO2 molten salt

Liwen Zhang, X. Xi, Wang Xintao, 2021 .

Tensile and Charpy impact properties of an ODS ferritic/martensitic steel 9Cr–1.8W–0.5Ti–0.35Y2O3

Zhangjian Zhou, Shaofu Li, Liwei Zhang, 2014 .

The corrosion and stress corrosion cracking behavior of a novel alumina-forming austenitic stainless steel in supercritical water

Zhangjian Zhou, Le-fu Zhang, Guangming Zhang, 2017 .

Creep behaviors of Fe-18Ni-12Cr based alumina-forming austenitic steels with ultralow carbon

Zhangjian Zhou, Man Wang, Hongying Sun, 2021, Journal of Materials Science.

Creep behavior of an alumina-forming austenitic steel with simple alloy design

Zhangjian Zhou, Wenyue Zheng, Man Wang, 2020 .

Effects of solution depletion and segregation oxidation on morphology of modified 310 austenitic stainless steel

Zhangjian Zhou, Shaofu Li, Guangming Zhang, 2016 .

Study on hot workability and optimization of process parameters of a modified 310 austenitic stainless steel using processing maps

Zhangjian Zhou, Rui-qian Zhang, R. Tang, 2015 .

Hot deformation behavior and microstructural evolution of a modified 310 austenitic steel

Zhangjian Zhou, Rui-qian Zhang, R. Tang, 2014 .

The microstructure and mechanical properties of Al-containing 9Cr ODS ferritic alloy

Guangming Zhang, Jonathan Almer, Pinghuai Wang, 2015 .

The comparison of microstructures and mechanical properties between 14Cr-Al and 14Cr-Ti ferritic ODS alloys

Zhangjian Zhou, Shaofu Li, J. Almer, 2016 .

Structural evolution of oxide dispersion strengthened austenitic powders during mechanical alloying and subsequent consolidation

Zhangjian Zhou, Shaofu Li, Guangming Zhang, 2015 .

The influence of Cr content on the mechanical properties of ODS ferritic steels

Zhangjian Zhou, Shaofu Li, Liwei Zhang, 2014 .

Microstructural observation and tensile properties of ODS-304 austenitic steel

Zhangjian Zhou, Shaofu Li, Man Wang, 2013 .

Effects of plastic deformations on microstructure and mechanical properties of ODS-310 austenitic steel

Zhangjian Zhou, Shaofu Li, Man Wang, 2012 .

Effect of rare earth oxide addition on microstructure and mechanical properties of Ni-based alloy

Y. Chun, Man Wang, H. Han, 2021 .

Hot deformation behavior and processing map of a 9Cr ferritic/martensitic ODS steel

Zhangjian Zhou, Shaofu Li, Guangming Zhang, 2014 .

In situ observation of nanoparticle formation in nickel-based mechanical alloyed powders

Y. Chun, Hee-Suk Chung, Jinsung Jang, 2018, Journal of Materials Science.

Microstructural investigation of oxide dispersion strengthened alloy 617 after creep rupture at high temperature

Woo-Gon Kim, Jinsung Jang, Man Wang, 2018 .

Microstructural evolution and mechanical properties of an Fe–18Ni–16Cr–4Al base alloy during aging at 950°C

Zhangjian Zhou, Rui-qian Zhang, R. Tang, 2016, International Journal of Minerals, Metallurgy, and Materials.

Enhanced strength and high temperature resistance of 25Cr20Ni ODS austenitic alloy through thermo-mechanical treatment and addition of Mo

S. Schmauder, Zhangjian Zhou, Y. Schneider, 2019, Fusion Engineering and Design.

Interaction between texture evolution and dynamic recrystallization of extruded AZ80 magnesium alloy during hot deformation

L. Qian, D. Qin, Man Wang, 2020 .

Evolution of microstructure and tensile properties of Fe–18Ni–12Cr based AFA steel during aging at 700 °C

M. P. Phaniraj, Zhangjian Zhou, Jinsung Jang, 2016 .

Fabrication and mechanical properties of a 14Cr-ODS steel

Zhangjian Zhou, Shaofu Li, Man Wang, 2013 .

Study of the corrosion behavior of a 18Cr-oxide dispersion strengthened steel in supercritical water

Zhangjian Zhou, Shaofu Li, Le-fu Zhang, 2012 .

Precipitation phases at different processes and heat treat ments as well as their effects on the mechanical properties of super-austenitic stainless steel

Zhangjian Zhou, Shaofu Li, Liwei Zhang, 2013 .

Radiation induced microstructures in ODS 316 austenitic steel under dual-beam ions

M. Daymond, Zhangjian Zhou, Z. Yao, 2014 .

Effects of aluminum on microstructure and mechanical behavior of 14Cr–ODS steels

Zhangjian Zhou, Shaofu Li, Guangming Zhang, 2015 .