H. Yun

发表

Effects of Thermal Treatment on Tensile Creep and Stress‐Rupture Behavior of Hi‐Nicalon Sic Fibers

J. DiCarlo, J. Goldsby, H. Yun, 1995 .

Comparison of the Tensile, Creep, and Rupture Strength Properties of Stoichiometric SiC Fibers

J. DiCarlo, H. Yun, 2008 .

Issues for Creep and Rupture Evaluation of Ceramic Fibers

J. DiCarlo, H. Yun, 1995 .

MODELING FOREIGN OBJECT DAMAGE TO CVI MI SiC/iBN/SiC, N720/AS OXIDE/OXIDE, AND HIPERCOMP TM 2D SiC/SiC CERAMIC COMPOSITE COMPONENTS IN GAS TURBINE ENGINES AT AMBIENT AND ELEVATED TEMPERATURES

G. Morscher, F. Abdi, H. Yun, 2011 .

Matrix Cracking in 3D Orthogonal Melt-Infiltrated Sic/Sic Composites with Various Z-Fiber Types

G. Morscher, J. DiCarlo, H. Yun, 2013 .

Through‐Thickness Properties of 2D Woven SiC/SiC Panels with Various Microstructures

J. DiCarlo, H. Yun, 2008 .

Hoop Tensile Characterization Of SiC/SiC Cylinders Fabricated From 2D Fabric

J. DiCarlo, H. Yun, M. Verrilli, 2008 .

Non-oxide (Silicon Carbide) Fibers

James A. DiCarlo, J. DiCarlo, Hee-Mann Yun, 2005 .

High temperature mechanical properties of Al{sub 2}O{sub 3}/ZrO{sub 2}(Y{sub 2}O{sub 3}) fibers

S. Farmer, A. Sayir, P. Dickerson, 1995 .

High Temperature Mechanical Properties of Al 2 O 3 /ZrO 2 (Y 2 O 3 )Fibers

S. Farmer, A. Sayir, P. Dickerson, 1994 .

Fabrication and biocompatibility in vitro of potassium titanate biological thin film/titanium alloy biological composite

H. Yun, Qin Yumin, Wang Huifen, 2007 .

Tensile Creep and Stress-rupture Behavior of Polymer Derived Sic Fibers

J. DiCarlo, J. Goldsby, H. Yun, 1994 .

Effect of composition and microstructure on the creep and stress-rupture behavior of tungsten alloy wires at 1366-1500 K

H. Yun, 1993 .

Effect of a Boron Nitride Interphase That Debonds between the Interphase and the Matrix in SiC/SiC Composites

G. Morscher, J. DiCarlo, H. Yun, 2004 .

Fracture mechanisms for SiC fibers and SiC/SiC composites under stress-rupture conditions at high temperatures

J. A. DiCarlo, H. M. Yun, J. B. Hurst, 2004, Appl. Math. Comput..

Effects of Fiber Architecture on Matrix Cracking for Melt‐Infiltrated SiC/SiC Composites

Gregory N. Morscher, James D. Kiser, James A. DiCarlo, 2009 .

Processing and Structural Advantages of the Sylramic‐iBN SiC Fiber for SiC/SiC Components

J. DiCarlo, R. Bhatt, J. Hurst, 2008 .

In‐Plane Cracking Behavior and Ultimate Strength for 2D Woven and Braided Melt‐Infiltrated SiC/SiC Composites Tensile Loaded in Off‐Axis Fiber Directions

G. Morscher, J. DiCarlo, H. Yun, 2007 .

Progress in SiC/SiC Composites for Engine Applications

G. Morscher, J. DiCarlo, H. Yun, 2006 .

SiC/SiC Composites for 1200°C and Above

Ramakrishna T. Bhatt, Gregory N. Morscher, James A. DiCarlo, 2005 .

Progress in SiC/SiC Ceramic Composite Development for Gas Turbine Hot-Section Components Under NASA EPM and UEET Programs

Ramakrishna T. Bhatt, Gregory N. Morscher, James A. DiCarlo, 2002 .

Thermomechanical Characterization of SiC Fiber Tows and Implications for CMC

J. DiCarlo, H. Yun, 1999 .

Thermomechanical Characterization of SiC Fiber Tows and Implications for CMC

H. Yun, 2022 .

On the cyclic stress-strain behaviour of a Ni-base superalloy at room temperature

R. Wahi, H. Yun, V. Singh, 1988 .

Low Cycle Fatigue Behaviour of Nimonic PE 16 at Temperatures up to 650° C

V. Kutumbarao, R. Wahi, H. Yun, 1987 .

Tensile strain-rate sensitivity of

R. H. Titran, H. Yun, 1992, Metallurgical and Materials Transactions A.

TM-103727 Tensile Behavior of Tungsten / Niobium Composites at 1300-1600 K

R. H. Titran, H. Yun, 2011 .

The effect of high temperature reactor primary circuit helium on the formation and propagation of surface cracks in alloy 800 H and inconel 617

H. Nickel, P. Ennis, H. Yun, 1984 .

Fiber Contraction Approaches for Improving CMC Proportional Limit

J. DiCarlo, H. Yun, 1997 .

Creep and rupture of an advanced CVD SiC fiber

J. DiCarlo, J. Goldsby, H. Yun, 1997 .

Overview of NASA Studies on High-Temperature Ceramic Fibers

J. DiCarlo, H. Yun, 2001 .

Factors Controlling Stress Rupture of Fiber-Reinforced Ceramic Composites

J. DiCarlo, H. Yun, 1999 .

Single crystal fibers of yttria-stabilized cubic zirconia with ternary oxide additions

R. Miner, H. Yun, F. Ritzert, 2013 .

Stress-rupture behavior of small diameter polycrystalline alumina fibers

J. DiCarlo, J. Goldsby, H. Yun, 1993 .

Constituent-Based Life Models Being Developed for SiC/SiC Composites

J. DiCarlo, H. Yun, 2000 .

Time/Temperature Dependent Tensile Strength of SiC and Al2O3-Based Fibers

J. DiCarlo, H. Yun, 1997 .

Environmental effects on creep and stress-rupture properties of advanced SiC fibers

J. DiCarlo, J. Goldsby, H. Yun, 1995 .

Comparison of the Tensile, Creep, and Rupture Strength Properties of Stoichiometric SiC Fibers

H. Yun, 2022 .

Annealing effects on creep of polycrystalline alumina-based fibers

G. Morscher, J. DiCarlo, J. Goldsby, 1998 .

High Temperature Si-doped BN Interphases for Woven SiC/SiC Composites

G. Morscher, F. Hurwitz, H. Yun, 2008 .

Thermo-mechanical properties of super sylramic SiC fibers

D. Wheeler, J. DiCarlo, H. Yun, 2008 .

G. Morscher, J. DiCarlo, R. Bhatt, 2006 .

Tensile Behavior of Sic\Sic Composites Reinforced by Treated Sylramic Sic Fibers

J. Gyekenyesi, Y. L. Chen, D. Wheeler, 2008 .

New High-Performance SiC Fiber Developed for Ceramic Composites

J. DiCarlo, H. Yun, 2002 .

High-Performance SiC/SiC Ceramic Composite Systems Developed for 1315 C (2400 F) Engine Components

Ramakrishna T. Bhatt, Gregory N. Morscher, James A. DiCarlo, 2004 .

SiC/SiC Ceramic Matrix Composites Developed for High-Temperature Space Transportation Applications

G. Morscher, J. DiCarlo, R. Bhatt, 2005 .

Thermomechanical Behavior of Advanced SiC Fiber Multifilament Tows

J. DiCarlo, H. Yun, 2008 .

Tensile Behavior of As-Fabricated and Burner-Rig Exposed SiC/SiC Composites with Hi-Nicalon Type-S Fibers

Y. L. Chen, J. DiCarlo, H. Yun, 2002 .