Gaurav Mittal

发表

["A RAPID COMPRESSION MACHINE DESIGN, CHARACTERIZATION, AND AUTOIGNITION INVESTIGATIONS"]

Gaurav Mittal, Gaurav Mittal, 2006 .

Methodology to account for multi-stage ignition phenomena during simulations of RCM experiments

Gaurav Mittal, S. Scott Goldsborough, C. Banyon, 2013 .

Dimethyl Ether Autoignition in a Rapid Compression Machine: Experiments and Chemical Kinetic Modeling

Marcos Chaos, Chih-Jen Sung, Gaurav Mittal, 2008 .

A RAPID COMPRESSION MACHINE FOR CHEMICAL KINETICS STUDIES AT ELEVATED PRESSURES AND TEMPERATURES

Chih-Jen Sung, Gaurav Mittal, C. Sung, 2007 .

A Rapid Compression Machine with Crevice Containment

Gaurav Mittal, Anil Bhari, Gaurav Mittal, 2013 .

Effect of crevice mass transfer in a rapid compression machine

Gaurav Mittal, Gaurav Mittal, M. Chomier, 2014 .

Ignition Delay Study of Moist Hydrogen/Oxidizer Mixtures Using a Rapid Compression Machine

Yu Zhang, Chih-Jen Sung, Gaurav Mittal, 2012 .

Interpretation of experimental data from rapid compression machines without creviced pistons

Gaurav Mittal, Gaurav Mittal, M. Chomier, 2014 .

An aerosol rapid compression machine for studying energetic-nanoparticle-enhanced combustion of liquid fuels

Chih-Jen Sung, Gaurav Mittal, Elisa Toulson, 2011 .

A computationally efficient, physics-based model for simulating heat loss during compression and the delay period in RCM experiments

Gaurav Mittal, S. Scott Goldsborough, Colin Banyon, 2012 .

Autoignition of Toluene and Benzene at Elevated Pressures in a Rapid Compression Machine

Chih-Jen Sung, Gaurav Mittal, C. Sung, 2007 .

Computational fluid dynamics modeling of hydrogen ignition in a rapid compression machine

Chih-Jen Sung, Gaurav Mittal, Mandhapati P. Raju, 2008 .

Significance of the HO2 + CO reaction during the combustion of CO + H2 mixtures at high pressures

Kevin J. Hughes, Alison S. Tomlin, Chih-Jen Sung, 2007 .

Autoignition of ethanol in a rapid compression machine

Gaurav Mittal, Henry J. Curran, H. Curran, 2014 .

Autoignition of N-Decane under Elevated Pressure and Low-To-Intermediate Temperature Conditions

Chih-Jen Sung, Gaurav Mittal, Kamal Kumar, 2009 .

Vortex Formation in a Rapid Compression Machine: Influence of Physical and Operating Parameters

Chih-Jen Sung, Gaurav Mittal, Mandhapati P. Raju, 2012 .

CFD modeling of two-stage ignition in a rapid compression machine: Assessment of zero-dimensional approach

Chih-Jen Sung, Gaurav Mittal, Mandhapati P. Raju, 2010 .

Autoignition of H2/CO at elevated pressures in a rapid compression machine

Richard A. Yetter, Chih-Jen Sung, Gaurav Mittal, 2006 .

Aerodynamics inside a rapid compression machine

Chih-Jen Sung, Gaurav Mittal, C. Sung, 2006 .

Autoignition of methylcyclohexane at elevated pressures

Chih-Jen Sung, Gaurav Mittal, C. Sung, 2009 .

Computational assessment of an approach for implementing crevice containment in rapid compression machines

Gaurav Mittal, Gaurav Mittal, Sreenath B. Gupta, 2012 .

A numerical assessment of the novel concept of crevice containment in a rapid compression machine

Gaurav Mittal, Mandhapati P. Raju, Anil Bhari, 2011 .