S. Hemes

发表

Nm-scale pore space characteristics of the Boom Clay (Mol-1 borehole) and the Ypresian clays (Kallo-1 borehole)

R. Swennen, J. Urai, G. Desbois, 2016 .

Nanometer-scale pore fluid distribution and drying damage in preserved clay cores from Belgian clay formations inferred by BIB-cryo-SEM

X. Sillen, J. Urai, G. Desbois, 2014 .

Grain size measurements of natural gas hydrates

I. MacDonald, G. Bohrmann, H. Klein, 2010 .

Crystallite size distributions of marine gas hydrates

G. Bohrmann, H. Klein, W. Kuhs, 2008 .

Microstructures and Mechanical Properties of Hybrid, Additively Manufactured Ti6Al4V after Thermomechanical Processing

M. Bambach, A. Weisheit, I. Sizova, 2021, Materials.

Microstructural characterisation of the Ypresian clays (Kallo-1) at nanometre resolution, using broad-ion beam milling and scanning electron microscopy

J. Urai, G. Desbois, J. Klaver, 2016, Netherlands Journal of Geosciences.

Variations in the morphology of porosity in the Boom Clay Formation: insights from 2D high resolution BIB-SEM imaging and Mercury injection Porosimetry

J. Urai, G. Desbois, M. Honty, 2013, Netherlands Journal of Geosciences - Geologie en Mijnbouw.

Preparation Route for the Metallographic and Analytical Investigation of ZnAlCu Alloys

A. Bührig-Polaczek, S. Düker, S. Hemes, 2020 .

Direct Energy Deposition of TiAl for Hybrid Manufacturing and Repair of Turbine Blades

A. Weisheit, U. Hecht, S. Hemes, 2020, Materials.

Laser Powder Bed Fusion of Eutectic Al–Ni Alloys: Experimental and Phase-Field Studies

G. Boussinot, M. Apel, O. Stryzhyboroda, 2020 .

Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing

Markus Bambach, F. Meiners, Irina Sizova, 2020 .

Investigation of Start Block and Corresponding Influence for Grain Selection during Casting of Single-Crystal Superalloys

A. Bührig-Polaczek, D. Ma, Fu Wang, 2019, Materials.

Multi-scale characterization of porosity in Boom Clay (HADES-level, Mol, Belgium) using a combination of X-ray μ-CT, 2D BIB-SEM and FIB-SEM tomography

János Urai, Jens-Oliver Schwarz, Susanne Hemes, 2015 .

The connectivity of pore space in mudstones: insights from high-pressure Wood's metal injection, BIB-SEM imaging, and mercury intrusion porosimetry

J. Urai, G. Desbois, Z. Radí, 2015 .

New Hybrid Manufacturing Routes Combining Forging and Additive Manufacturing to Efficiently Produce High Performance Components from Ti-6Al-4V

Markus Bambach, Pascal Jürgens, Irina Sizova, 2020 .

Investigation of microstructures in naturally and experimentally deformed reference clay rocks using innovative methods in scanning electron microscopy

P. Bésuelle, J. Urai, B. Laurich, 2016 .

A study on hot-working as alternative post-processing method for titanium aluminides built by laser powder bed fusion and electron beam melting

M. Bambach, C. Leyens, I. Sizova, 2021 .

Microstructural and Mechanical Analysis of High-Performance Parts Produced by Hybrid Additive Manufacturing of Powder LMD on Forged Base Components

M. Bambach, A. Weisheit, J. Schleifenbaum, 2021 .

Thermal stress and local crystallization parameters in single-crystal rods of Ni-Mn-Ga ferromagnetic shape memory alloys

M. Laufenberg, E. Pagounis, H. Behnken, 2020 .

Investigation of High-Depostition-Rate Additive Manufacturing of Ti-6Al-4V via Laser Material Deposition

A. Weisheit, R. Hama-Saleh, S. Hemes, 2021 .