I. Manna

发表

Microstructural change during laser welding of Inconel 718

Sumit Sharma, A. Nath, K. Biswas, 2020 .

Microstructural characterization of laser surface-melted Inconel 718

Sumit Sharma, A. Nath, J. Majumdar, 2020, Journal of Optics.

Synthesis of copper alloys with extended solid solubility and nano Al2O3 dispersion by mechanical alloying and equal channel angular pressing

R. Hellmig, S. Bera, Y. Estrin, 2010 .

Tribocorrosion Behaviour of Laser-Induced Periodic Surface Structured Ti6Al4V

R. Bathe, J. Dutta Majumdar, I. Manna, 2022, Journal of Bio- and Tribo-Corrosion.

Studies on Ti, Zn and Ti + Zn Bilayer Coatings on Interstitial Free Steel for Enhancement of Wear and Corrosion Resistance

J. Majumdar, A. Kumar, S. Mukherjee, 2019, Journal of Materials Engineering and Performance.

Microstructure and mechanical properties of nano-Y2O3 dispersed ferritic steel synthesized by mechanical alloying and consolidated by pulse plasma sintering

K. Kurzydłowski, L. Ciupinski, J. Majumdar, 2012 .

Comparison of microstructure and electronic properties of TiO2 thin films grown by different techniques

A. K. Tyagi, R. Ramaseshan, A. Prasad, 2011 .

Wear and Corrosion Protection of Interstitial Free Steel by Sputter Deposition of Alloy Coating as a Novel Alternative to Galvanizing

J. Majumdar, I. Manna, M. Debnath, 2021, Journal of Materials Engineering and Performance.

Complete and Incomplete Wetting of Ferrite Grain Boundaries by Austenite in the Low-Alloyed Ferritic Steel

J. Majumdar, B. Straumal, A. Petelin, 2012, Journal of Materials Engineering and Performance.

Prediction of enthalpy of formation and Gibbs energy change in pseudo-binary (Ti–Zr)(Fe–Cr)2 and pseudo-ternary (Ti–Zr)(Fe–Cr)2-H system using extended Miedema model

S. Bera, I. Manna, M. Ramgopal, 2007 .

Comparative evaluation of TiC and/or WC addition on microstructure, mechanical properties, thermal residual stress and reciprocating wear behaviour of ZrB_2–20SiC composites

S. Basu, P. Sengupta, I. Manna, 2023, Journal of Materials Science.

Discontinuous reactions in solids

S. K. Pabi, W. Gust, I. Manna, 2001 .

Structure–property correlation in a novel ZrB2–SiC ultrahigh-temperature ceramic composite with Al-alloy sinter additive

P. Sengupta, I. Manna, S. Basu, 2021, Journal of Materials Science.

Microstructural and impedance study of nanocrystalline lanthana-doped scandia-stabilized zirconia

A. C. Pandey, I. Manna, M. Pastor, 2012, Journal of Nanoparticle Research.

Microstructural and nuclear magnetic resonance studies of solid-state amorphization in Al–Ti–Si composites prepared by mechanical alloying

I. Manna, P. Nandi, B. Bandyopadhyay, 2004 .

Microstructures, wear and corrosion resistance of laser composite surfaced austenitic stainless steel (AISI 304 SS) with tungsten carbide

S. Pityana, I. Manna, J. Singh, 2021 .

Solid state synthesis of Al-based amorphous and nanocrystalline Al–Nb–Si and Al–Zr–Si alloys

F. Banhart, P. Chattopadhyay, I. Manna, 2003 .

Synthesis and characterization of precipitation hardened amorphous matrix composite by mechanical alloying and pulse plasma sintering of Al65Cu20Ti15

M. Rosinski, I. Manna, D. Roy, 2009 .

Mechanism and kinetics of type II discontinuous coarsening in a Zn-4 at% Ag alloy

S. K. Pabi, J. Jha, I. Manna, 1996 .

Resistometric determination of the metastable solvus for discontinuous precipitation

S. K. Pabi, I. Manna, 1990 .

Laser composite surfacing of stainless steel with SiC

B. Chandra, A. Nath, I. Manna, 2006 .

Synthesis and characterization of in situ nanocrystalline intermetallic phase reinforced AlTiSi amorphous matrix composite

D. Roy, Z. Witczak, R. Mitra, 2008 .

3-D Printing by Laser-Assisted Direct Energy Deposition (LDED): The Present Status

J. Majumdar, I. Manna, Dileep Madapana, 2021, Transactions of the Indian National Academy of Engineering.

A pre-precipitation phenomenon in the Pb-Sn alloy

S. K. Pabi, I. Manna, 1988 .

Effect of Particle Size on Thermal Conductivity of Nanofluid

P. K. Das, P. Das, I. Manna, 2008 .

Growth and low-temperature photoluminescence properties of hybrid ZnO–SnO2 nanobelts

S. Ray, S. Bysakh, I. Manna, 2012 .

Kinetics of discontinuous precipitation and type I discontinuous coarsening in Zn–4 at % Ag alloy

S. K. Pabi, I. Manna, J. Jha, 1999 .

Kinetics of discontinuous precipitation in a Zn-2.5 at % Cu alloy

S. K. Pabi, I. Manna, J. Jha, 1995, Journal of Materials Science.

Tribocorrosion Behaviour of Laser-Induced Periodic Surface Structured Ti6Al4V

R. Bathe, J. Dutta Majumdar, I. Manna, 2022, Journal of Bio- and Tribo-Corrosion.

Effect of Al doping on structural, optical and electrical properties of SnO2 thin films synthesized by pulsed laser deposition

S. Ray, I. Manna, S. Sinha, 2014 .

Laser Surface Melting of AISI 316L Stainless Steel for Bio-implant Application

S. Pityana, J. Majumdar, I. Manna, 2018, Proceedings of the National Academy of Sciences, India Section A: Physical Sciences.

Laser Surface Melting of AISI 316L Stainless Steel for Bio-implant Application

S. Pityana, J. Majumdar, Arunoday Kumar, 2018, Proceedings of the National Academy of Sciences, India Section A: Physical Sciences.

Microstructural Evolution and Mechanical Properties of Nanointermetallic Phase Dispersed Al65Cu20Ti15 Amorphous Matrix Composite Synthesized by Mechanical Alloying and Hot Isostatic Pressing

O. Ojo, I. Manna, D. Roy, 2011 .

Effect of beam oscillation on microstructure, defect density, and resistivity of electron beam welded niobium

D. Kanjilal, P. Prakash, J. Dutta Majumdar, 2022, Welding in the World.

Ultrafast Laser-Induced Periodic Structuring of Titanium Alloy (Ti-6Al-4V)

R. Bathe, G. Padmanabham, J. Dutta Majumdar, 2021, Journal of Materials Engineering and Performance.

Effect of substrate surface roughness on the microstructure and properties of laser surface cladding of Tribaloy T-400 on mild steel

Siddhartha Roy, I. Manna, M. K. Nayak, 2023, Surface and Coatings Technology.

A numerical model of peritectoid transformation

S. K. Pabi, A. Das, I. Manna, 1999 .

Alloying behaviour in nanocrystalline materials during mechanical alloying

S. K. Pabi, I. Manna, B. Murty, 1999 .

Effect of TiC Reinforcement on Densification, Structural Evolution and High-Temperature Oxidation Behaviour of ZrB_2-20 vol pct SiC Composite

S. Basu, P. Sengupta, I. Manna, 2023, Metallurgical and Materials Transactions A.

Additive manufacturing of aluminium alloy 2024 by laser powder bed fusion: microstructural evolution, defects and mechanical properties

G. Gibbons, H. Kotadia, D. Tanner, 2021, Rapid Prototyping Journal.

Enhancement of hardness and corrosion resistance of low alloy high carbon steel by plasma immersion ion implantation

S. Roy, I. Manna, S. Mukherjee, 2008 .

Wear and corrosion behavior of nano carbide dispersed AISI304 stainless steel by laser surface processing

S. Pityana, I. Manna, D. Sen, 2021, Surface Topography: Metrology and Properties.

Laser assisted fabrication of Co on Ti–6Al–4V for bio‐implant application

A. Nath, S. Ganesan, I. Manna, 2006 .