Olivier Polit

发表

Robust C0 high‐order plate finite element for thin to very thick structures: mechanical and thermo‐mechanical analysis

Olivier Polit, Philippe Vidal, M. D'Ottavio, 2012 .

Optimisation of laminated composite plates using multi-level combined Pareto approaches

Peter Gosling, Olivier Polit, Faimun Faimun, 2006 .

On the numerical investigation of cardiovascular balloon-expandable stent using finite element method

Salim Belouettar, Olivier Polit, Ahmed Makradi, 2013 .

Further Results on the Development of a Novel VTOL Aircraft, the Anuloid: Part II: Flight Mechanics

Erasmo Carrera, Marco Petrolo, Olivier Polit, 2017 .

Elbow flexion and extension identification using surface electromyography signals

Laurent Gallimard, M. N. El Korso, Olivier Polit, 2015, 2015 23rd European Signal Processing Conference (EUSIPCO).

Assessment of the refined sinus plate finite element

Olivier Polit, Philippe Vidal, M. D'Ottavio, 2014 .

Benchmark of wrinkling formulae and methods for pre-sizing of aircraft lightweight sandwich structures

Bruno Castanié, Olivier Polit, C. Bouvet, 2021 .

Forced vibration analysis of composite beams with piezoelectric layers based on the variable separation method

Rafael Castro-Triguero, Philippe Vidal, Laurent Gallimard, 2021 .

Design and Characterization of a New Soft Fingertip Force Sensor for Precision Robotic Grasping Task

Olivier Polit, Astrid Rubiano, Jose Luis Ramirez, 2021, International Review of Automatic Control (IREACO).

Explicit solutions for the modeling of laminated composite plates with arbitrary stacking sequences

L. Gallimard, Philippe Vidal, Olivier Polit, 2014 .

Hierarchical Beam Finite Elements Based Upon a Variables Separation Method

Gaetano Giunta, Salim Belouettar, L. Gallimard, 2016 .

An analysis of composite beams by means of hierarchical finite elements and a variables separation method

Gaetano Giunta, Salim Belouettar, L. Gallimard, 2015 .

Analysis of sandwich plates by radial basis functions collocation, according to Murakami's Zig-Zag theory

Erasmo Carrera, Maria Cinefra, Olivier Polit, 2012 .

An efficient C1 finite element with continuity requirements for multilayered/sandwich shell structures

Frédéric Dau, Olivier Polit, M. Touratier, 2004 .

Buckling and wrinkling of anisotropic sandwich plates

Lorenzo Dozio, Olivier Polit, M. D'Ottavio, 2018, International Journal of Engineering Science.

Analysis of laminated shells by a sinusoidal shear deformation theory and radial basis functions collocation, accounting for through-the-thickness deformations

Erasmo Carrera, C.M.C. Roque, Maria Cinefra, 2011 .

Vibration of multilayered beams using sinus finite elements with transverse normal stress

Philippe Vidal, Olivier Polit, 2010 .

Radial basis functions collocation and a unified formulation for bending, vibration and buckling analysis of laminated plates, according to a variation of Murakami’s zig-zag theory

Erasmo Carrera, C.M.C. Roque, Maria Cinefra, 2011 .

Two higher order Zig-Zag theories for the accurate analysis of bending, vibration and buckling response of laminated plates by radial basis functions collocation and a unified formulation

Erasmo Carrera, C.M.C. Roque, Maria Cinefra, 2011 .

Sensitivity Analysis of Thickness Assumptions for Piezoelectric Plate Models

Olivier Polit, Michele D'Ottavio, M. D'Ottavio, 2009 .

A thermomechanical finite element for the analysis of rectangular laminated beams

Philippe Vidal, Olivier Polit, 2006 .

A refined sinus plate finite element for laminated and sandwich structures under mechanical and thermomechanical loads

Philippe Vidal, Olivier Polit, P. Vidal, 2013 .

Coupling of heterogeneous kinematics and Finite Element approximations applied to composite beam structures

Philippe Vidal, Olivier Polit, M. D'Ottavio, 2014 .

An Efficient Finite Shell Element for the Static Response of Piezoelectric Laminates

Philippe Vidal, Olivier Polit, Michele D'Ottavio, 2011 .

A multilayered/sandwich triangular finite element applied to linear and non-linear analyses

Olivier Polit, M. Touratier, O. Polit, 2002 .

A new laminated triangular finite element assuring interface continuity for displacements and stresses

Olivier Polit, M. Touratier, O. Polit, 1997 .

Assessment of variable separation for finite element modeling of free edge effect for composite plates

L. Gallimard, Philippe Vidal, Olivier Polit, 2015 .

Flexural loss factors of sandwich and laminated composite beams using linear and nonlinear dynamic analysis

Olivier Polit, P. Boisse, B. P. Patel, 1999 .

Composite beam finite element based on the Proper Generalized Decomposition

L. Gallimard, Philippe Vidal, Olivier Polit, 2012 .

A new eight‐node quadrilateral shear‐bending plate finite element

Olivier Polit, M. Touratier, O. Polit, 1994 .

Assessment of plate theories for free-edge effects

Philippe Vidal, Olivier Polit, M. D'Ottavio, 2013 .

Electric potential approximations for an eight node plate finite element

Olivier Polit, I. Bruant, O. Polit, 2006 .

A high-fidelity first-order reliability analysis for shear deformable laminated composite plates

Peter Gosling, Olivier Polit, Faimun, 2014 .

Coupling finite element and reliability analysis through proper generalized decomposition model reduction

L. Gallimard, Philippe Vidal, Olivier Polit, 2013 .

Assessment of the refined sinus model for the non-linear analysis of composite beams

Olivier Polit, P. Vidal, P. Vidal, 2009 .

Linearized global and local buckling analysis of sandwich struts with a refined quasi-3D model

Olivier Polit, Michele D’Ottavio, M. D'Ottavio, 2015 .

AC1 finite element including transverse shear and torsion warping for rectangular sandwich beams

Olivier Polit, B. P. Patel, M. Ganapathi, 1999 .

A family of sinus finite elements for the analysis of rectangular laminated beams

Olivier Polit, P. Vidal, P. Vidal, 2008 .

Assessment of MITC plate elements based on CUF with respect to distorted meshes

Erasmo Carrera, Maria Cinefra, Olivier Polit, 2020 .

Bending and Vibration of Laminated Plates by a Layerwise Formulation and Collocation with Radial Basis Functions

Erasmo Carrera, C.M.C. Roque, Maria Cinefra, 2013 .

A C0 EIGHT‐NODE MEMBRANE‐SHEAR‐BENDING ELEMENT FOR GEOMETRICALLY NON‐LINEAR (STATIC AND DYNAMIC) ANALYSIS OF LAMINATES

Olivier Polit, M. Touratier, M. Ganapathi, 1996 .

A REFINED SINE-BASED FINITE ELEMENT WITH TRANSVERSE NORMAL DEFORMATION FOR THE ANALYSIS OF LAMINATED BEAMS UNDER THERMOMECHANICAL LOADS

Philippe Vidal, Olivier Polit, P. Vidal, 2009 .

High-order triangular sandwich plate finite element for linear and non-linear analyses

Olivier Polit, M. Touratier, O. Polit, 2000 .