A. Kotov

发表

Microstructure Evolution of Ti-Al-Mo-V Titanium Alloy During the Superplastic Forming with FES Estimated Strain Rates Across the Formed Parts at Constant Gas Pressure

Ahmed O. Mosleh, A. Mikhaylovskaya, A. Kotov, 2020 .

Modelling approach for predicting the superplastic deformation behaviour of titanium alloys with strain hardening/softening characterizations

Ahmed O. Mosleh, A. Mikhaylovskaya, A. Kotov, 2019, Materials Research Express.

Experimental, modelling and simulation of an approach for optimizing the superplastic forming of Ti-6%Al-4%V titanium alloy

Ahmed O. Mosleh, J. Kwame, A. Mikhaylovskaya, 2019, Journal of Manufacturing Processes.

Arrhenius-Type Constitutive Equation Model of Superplastic Deformation Behaviour of Different Titanium Based Alloys

Ahmed O. Mosleh, A. Mikhaylovskaya, A. Kotov, 2018, Defect and Diffusion Forum.

Superplastic deformation behaviour and microstructure evolution of near-α Ti-Al-Mn alloy

Ahmed O. Mosleh, I. Golovin, J. Kwame, 2017 .

Effect of Homogenization Treatment Regime on Microstructure, Recrystallization Behavior, Mechanical Properties, and Superplasticity of Al-Cu-Er-Zr Alloy

I. Loginova, A. V. Pozdniakov, A. Mikhaylovskaya, 2021, JOM.

Fabrication of AA2024/SiCp Metal Matrix Composite by Mechanical Alloying

G. Karunakaran, A. Prosviryakov, O. Rofman, 2021, Metals and Materials International.

Processing and Microstructural Characterization of Metallic Powders Produced from Chips of AA2024 Alloy

V. Cheverikin, A. Prosviryakov, O. Rofman, 2019, JOM.

AA2024/SiC metal matrix composites simultaneously improve ductility and cracking resistance during elevated temperature deformation

V. Cheverikin, O. Rofman, M. Short, 2020, Materials Science and Engineering: A.

Application of nanodiamonds for in situ synthesis of TiC reinforcing nanoparticles inside aluminium matrix during mechanical alloying

A. Prosviryakov, M. Presniakov, I. Khodos, 2017 .

Bearing Aluminum-Based Alloys: Microstructure, Mechanical Characterizations, and Experiment-Based Modeling Approach

Ahmed O. Mosleh, I. Gershman, A. Kotov, 2022, Materials.

Precipitation behavior and high strain rate superplasticity in a novel fine-grained aluminum based alloy

O. Rofman, N. Tabachkova, A. Mikhaylovskaya, 2019, Materials Science and Engineering: A.

Mosleh, Ahmed and Mikhaylovskaya, Anastasia and Kotov, Anton and Pourcelot, Theo and Aksenov, Sergey and Kwame, James and Portnoy, Vladimir (2017) Modelling of the superplastic deformation of the near-a titanium alloy (Ti-2.5AL-1.8MN) using arrhenius-type constitutive model

J. Kwame, A. Mikhaylovskaya, A. Kotov, 2018 .

Modelling of the Superplastic Deformation of the Near-α Titanium Alloy (Ti-2.5Al-1.8Mn) Using Arrhenius-Type Constitutive Model and Artificial Neural Network

Ahmed O. Mosleh, J. Kwame, A. Mikhaylovskaya, 2017 .

Microstructural Characterization and Tensile Properties of Al-Mg-Fe-Ce Alloy at Room and Elevated Temperatures

V. Cheverikin, A. Bazlov, N. Tabachkova, 2020, JOM.

Microstructure, superplasticity, and mechanical properties of Al–Mg–Er–Zr alloys

Ahmed O. Mosleh, O. Rofman, A. Mikhaylovskaya, 2022, Materials Characterization.

Initial microstructure influence on Ti–Al–Mo–V alloy's superplastic deformation behavior and deformation mechanisms

Ahmed O. Mosleh, V. Velay, A. Mikhaylovskaya, 2021 .

High-Strength Titanium-Based Alloy for Low-Temperature Superplastic Forming

D. V. Louzguine-Luzgin, Ahmed O. Mosleh, A. Bazlov, 2020, Metallurgical and Materials Transactions A.

Influence of Fe on the microstructure, superplasticity and room-temperature mechanical properties of Ti–4Al–3Mo–1V-0.1B alloy

Ahmed O. Mosleh, A. Mikhaylovskaya, A. Kotov, 2022, Materials Science and Engineering: A.

Microstructure and Superplastic Behavior of Ni-Modified Ti-Al-Mo-V Alloys

V. Cheverikin, Ahmed O. Mosleh, A. Mikhaylovskaya, 2022, Metals.

Experimental study of the superplastic deformation mechanisms of high-strength aluminum-based alloy

O. Rofman, A. Mikhaylovskaya, A. Kotov, 2020 .

Superplasticity of Ti-6Al-4V Titanium Alloy: Microstructure Evolution and Constitutive Modelling

Ahmed O. Mosleh, J. Kwame, A. Mikhaylovskaya, 2019, Materials.

Superplasticity of an Ultrafine-Grained Ti–4% Al–1% V–3% Mo Alloy

V. K. Portnoi, Ahmed O. Mosleh, A. Prosviryakov, 2019, Physics of Metals and Metallography.

Experimental Investigation of the Effect of Temperature and Strain Rate on the Superplastic Deformation Behavior of Ti-Based Alloys in the (α+β) Temperature Field

Essam B. Moustafa, Ahmed O. Mosleh, A. Mikhaylovskaya, 2018, Metals.

Al-Mg-Fe-Ni based alloy for high strain rate superplastic forming

O. Rofman, A. Mikhaylovskaya, A. Kotov, 2018 .

Characterization of Superplastic Deformation Behavior for a Novel Al-Mg-Fe-Ni-Zr-Sc Alloy: Arrhenius-Based Modeling and Artificial Neural Network Approach

Ahmed O. Mosleh, O. Rofman, A. Mikhaylovskaya, 2021, Applied Sciences.

Superplastic forming of Ti-4Al-3Mo-1V alloy: flow behavior modelling and finite element simulation

Ahmed O. Mosleh, A. Mikhaylovskaya, A. Kotov, 2019, Procedia Manufacturing.

Superplastic deformation behavior of ultra-fine-grained Ti-1V-4Al-3Mo alloy: constitutive modeling and processing map

Ahmed O. Mosleh, J. Kwame, A. Mikhaylovskaya, 2019, Materials Research Express.

Superplastic behaviour of Al-Mg-Zn-Zr-Sc-based alloys at high strain rates

V. Cheverikin, A. Mikhaylovskaya, A. Kotov, 2016 .

Formation of Fine-Grained Structure and Superplasticity in Commercial Aluminum Alloy 1565ch

A. Kotov, V. Portnoy, V. Levchenko, 2017, Metal Science and Heat Treatment.

Superplasticity of high-strength Al-based alloys produced by thermomechanical treatment

A. A. Tsarkov, A. Mikhaylovskaya, A. Kotov, 2016 .

Effect of the solid-solution composition on the superplasticity characteristics of Al-Zn-Mg-Cu-Ni-Zr Alloys

A. Mikhaylovskaya, A. Kotov, V. Portnoy, 2014, The Physics of Metals and Metallography.

A high-strength aluminium-based alloy with advanced superplasticity

A. Mikhaylovskaya, A. Kotov, V. Portnoy, 2014 .

Microstructure Evolution, Constitutive Modelling, and Superplastic Forming of Experimental 6XXX-Type Alloys Processed with Different Thermomechanical Treatments

Ahmed O. Mosleh, A. Mikhaylovskaya, A. Kotov, 2023, Materials.

On the mechanisms of the high-strain-rate superplastic deformation of aluminum-based alloys

V. Cheverikin, A. Mikhaylovskaya, A. Kotov, 2022, Materials Letters.

Grain-boundary and intragranular deformation in ultrafine-grained aluminum-based alloy at high strain rate

A. Mikhaylovskaya, A. Kotov, O. Yakovtseva, 2020 .

Effect of Multidirectional Forging and Subsequent Annealing to the Microstructure of Al-Mg-Mn Type Alloy

A. Mikhaylovskaya, A. Kotov, M. Kishchik, 2020 .

The Microstructure and High-Strain-Rate Superplasticity of the Al–Mg–Ni–Fe–Mn–Cr–Zr Alloy

A. Mikhaylovskaya, A. Kotov, A. Kishchik, 2019, Physics of Metals and Metallography.

Effect of Multidirectional Forging on the Grain Structure and Mechanical Properties of the Al–Mg–Mn Alloy

Ahmed O. Mosleh, A. Mikhaylovskaya, A. Kotov, 2018, Materials.

Effect of Homogenization Treatment on Superplastic Properties of Aluminum Based Alloy with Minor Zr and Sc Additions

A. Mikhaylovskaya, A. Kotov, V. Portnoy, 2018, Defect and Diffusion Forum.

High-strain-rate superplasticity of the Al–Zn–Mg–Cu alloys with Fe and Ni additions

A. Borisov, A. Mikhaylovskaya, A. Kotov, 2017, Physics of Metals and Metallography.

Superplasticity of clad aluminium alloy

M. Gorshenkov, A. Mikhaylovskaya, A. Kotov, 2017 .

Influence of Al3Ni crystallisation origin particles on hot deformation behaviour of aluminium based alloys

A. A. Tsarkov, A. Bazlov, A. Churyumov, 2017 .

Characterization of OT4-1 Alloy by Multi-Dome Forming Test

A. Kotov, S. Aksenov, A. Kolesnikov, 2017, Materials.

Comparison between superplastic deformation mechanisms at primary and steady stages of the fine grain AA7475 aluminium alloy

A. Irzhak, S. Krymskiy, A. Mikhaylovskaya, 2018 .

Comparison of Contributions of the Mechanisms of the Superplastic Deformation of Binary and Multicomponent Brasses

A. Irzhak, A. Mikhaylovskaya, A. Kotov, 2020, Physics of Metals and Metallography.

Mechanisms of Superplastic High-Rate Deformation in the Al–Mg–Zn–Fe–Ni–Zr–Sc Alloy

A. Irzhak, A. Mikhaylovskaya, A. Kotov, 2019, Physics of Metals and Metallography.

Microstructure, mechanical properties and superplasticity of the Al–Cu–Y–Zr alloy

A. Mikhaylovskaya, A. Kotov, R. Barkov, 2019, Materials Science and Engineering: A.

Effect of the Strain and Strain Rate on Microstructure Evolution and Superplastic Deformation Mechanisms

A. Mikhaylovskaya, A. Kotov, V. Portnoy, 2019, Physics of Metals and Metallography.

Superplastic deformation behaviour of aluminium containing brasses

A. Mikhaylovskaya, A. Kotov, V. Portnoy, 2016 .

Effect of alloying on superplasticity of two-phase brasses

V. K. Portnoi, A. Kotov, O. Yakovtseva, 2016, The Physics of Metals and Metallography.

The Effect of Multidirectional Forging on the Deformation and Microstructure of the Al–Mg Alloy

A. Mikhaylovskaya, A. Kotov, S. Aksenov, 2020, Physics of Metals and Metallography.

Use of Heterogenization for Improving Alloy AA5083 Superplasticity Indices

V. K. Portnoi, A. Kotov, S. Medvedeva, 2018, Metallurgist.

Particulate metal matrix composites development on the basis of in situ synthesis of TiC reinforcing nanoparticles during mechanical alloying

A. Prosviryakov, M. Presniakov, M. Khomutov, 2017 .

In situ synthesis of TiC nano-reinforcements in aluminum matrix composites during mechanical alloying

M. Burghammer, V. Popov, M. Rosenthal, 2018, Composites Part B: Engineering.

Effect of thermomechanical treatment on properties of an extruded Al-3.0Cu-1.2Mg/SiCp composite

A. Prosviryakov, O. Rofman, A. Mikhaylovskaya, 2019, Materials Science and Engineering: A.

A Novel Comparative Study Based on the Economic Feasibility of the Ceramic Nanoparticles Role’s in Improving the Properties of the AA5250 Nanocomposites

Essam B. Moustafa, Ahmed O. Mosleh, A. Melaibari, 2021, Coatings.

Effect of Multidirectional Forging on the Microstructure and Mechanical Properties of the Al–Mg–Mn–Cr Alloy

A. Mikhaylovskaya, A. Kotov, A. Kishchik, 2020, Physics of Metals and Metallography.

The Effect of Isothermal Multi-Directional Forging on the Grain Structure, Superplasticity, and Mechanical Properties of the Conventional Al–Mg-Based Alloy

A. Prosviryakov, A. Mikhaylovskaya, A. Kotov, 2019, Metals.

Aluminum Alloy Matrix Composite Reinforced with Metallic Glasses Particles Using Hot-Roll Bonding

A. Bazlov, A. Mikhaylovskaya, A. Kotov, 2020, Russian Journal of Non-Ferrous Metals.

Grain refinement during multidirectional forging due to β-phase heterogenization in aluminum-based alloys

N. Tabachkova, A. Mikhaylovskaya, A. Kotov, 2022, Materials Letters.

Effect of Coarse Eutectic-Originated Particles on the Microstructure and Properties of the Friction Stir-Processed Al-Mg-Zr-Sc-Based Alloys

Essam B. Moustafa, Ahmed O. Mosleh, A. Mikhaylovskaya, 2023, JOM.

Effect of adding chromium on internal friction and superplasticity of alloys of the Al – Mg system

V. K. Portnoi, I. Golovin, A. Kotov, 2012, Metal Science and Heat Treatment.

Precipitation Behavior of the Metastable Quasicrystalline I-Phase and θ′-Phase in Al-Cu-Mn Alloy

A. Prosviryakov, N. Tabachkova, A. Mikhaylovskaya, 2023, Metals.

The effect of pre-straining on the annealing-induced precipitation behavior of the icosahedral I-phase in an aluminum-based alloy

N. Tabachkova, A. Mikhaylovskaya, A. Kotov, 2021, Materials Letters.

Effect of Boron on the Microstructure, Superplastic Behavior, and Mechanical Properties of Ti-4Al-3Mo-1V Alloy

Ahmed O. Mosleh, A. Bazlov, A. Mikhaylovskaya, 2023, Materials.

Effect of Mo content on the microstructure, superplastic behavior, and mechanical properties of Ni and Fe-modified titanium alloys

Ahmed O. Mosleh, A. Mikhaylovskaya, A. Kotov, 2023, Materials Science and Engineering: A.

Effect of Modes of Heterogenizing Annealing Before Cold Rolling on the Structure and Properties of Sheets from Alloy 1565ch

A. Kotov, V. Portnoy, A. Mikhailovskaya, 2019, Metal Science and Heat Treatment.

The influence of rapid-diffusive β-stabilizers on the microstructure formation and superplasticity of titanium-based alloys

Ahmed O. Mosleh, A. Mikhaylovskaya, A. Kotov, 2024, Journal of Alloys and Compounds.

The Influence of Y and Er on the Grain Structure and Superplasticity of Al-Cu-Mg-Based Alloys

I. Loginova, A. Mikhaylovskaya, A. Kotov, 2023, JOM.