S. Aksenov

发表

On the Challenges and Prospects of the Superplastic Forming Process

D. Sorgente, F. Jarrar, S. Aksenov, 2018, Materials Science Forum.

Determination of biaxial stress–strain curves for superplastic materials by means of bulge forming tests at constant stress

D. Sorgente, S. Aksenov, 2020 .

2.5D FEM Study and Optimization of Roll Pass Design in Roughing Mill Group

E. Chumachenko, S. Aksenov, I. Logashina, 2011 .

Calculation and Study of Limited Orbits around the L2 Libration Point of the Sun–Earth System

S. Aksenov, S. Bober, 2018 .

Tensile Testing of Ti-6Al-4V Alloy Superplasticity

E. Chumachenko, S. Aksenov, I. Logashina, 2013 .

Methodology of Parameters Calculation for a Series of ‘‘Major’’ Trajectory Corrections of the Spektr-RG Spacecraft to Improve Its Radio Visibility

G. S. Zaslavskii, S. Aksenov, P. V. Mzhelskiy, 2022, Astronomy Letters.

Mosleh, Ahmed and Mikhaylovskaya, Anastasia and Kotov, Anton and Pourcelot, Theo and Aksenov, Sergey and Kwame, James and Portnoy, Vladimir (2017) Modelling of the superplastic deformation of the near-a titanium alloy (Ti-2.5AL-1.8MN) using arrhenius-type constitutive model

J. Kwame, A. Mikhaylovskaya, A. Kotov, 2018 .

Modelling of the Superplastic Deformation of the Near-α Titanium Alloy (Ti-2.5Al-1.8Mn) Using Arrhenius-Type Constitutive Model and Artificial Neural Network

Ahmed O. Mosleh, J. Kwame, A. Mikhaylovskaya, 2017 .

Superplasticity of Ti-6Al-4V Titanium Alloy: Microstructure Evolution and Constitutive Modelling

Ahmed O. Mosleh, J. Kwame, A. Mikhaylovskaya, 2019, Materials.

Investigation on the thickness distribution of highly customized titanium biomedical implants manufactured by superplastic forming

D. Sorgente, G. Palumbo, A. Piccininni, 2018 .

Determination of optimal gas forming conditions from free bulging tests at constant pressure

E. Chumachenko, S. Aksenov, S. Osipov, 2015 .

Influence of Al3Ni crystallisation origin particles on hot deformation behaviour of aluminium based alloys

A. A. Tsarkov, A. Bazlov, A. Churyumov, 2017 .

Characterization of Stress-Strain Behavior of Superplastic Titanium Alloy by Free Bulging Tests with Pressure Jumps

D. Sorgente, S. Aksenov, 2018, Defect and Diffusion Forum.

Characterization of OT4-1 Alloy by Multi-Dome Forming Test

A. Kotov, S. Aksenov, A. Kolesnikov, 2017, Materials.

Investigation of stress-strain behavior of a sheet material using free bulging test

D. Sorgente, S. Aksenov, Donato Sorgente, 2017 .

Characterization of Superplastic Materials by Results of Free Bulging Tests

S. Aksenov, S. Osipov, A. Kolesnikov, 2016 .

The Effect of Multidirectional Forging on the Deformation and Microstructure of the Al–Mg Alloy

A. Mikhaylovskaya, A. Kotov, S. Aksenov, 2020, Physics of Metals and Metallography.

Numerical simulation in roll pass design for bar rolling

E. N. Chumachenko, Tomáš Kubina, S. A. Aksenov, 2015 .

Computer simulation of single burn transfers between low-Earth and halo orbits in the Sun-Earth system

S. Aksenov, G. Mezentsev, 2021 .

The Synthesis of Nonlinear Hyperstable Adaptive Control Systems of Multiple Connected Electric Drives of Robotic Technological Equipment for arc Plasma Coating

Alexey Lutov, Oleg Khasanov, Zimfir Khasanov, 2019, Proceedings of the VIth International Workshop 'Critical Infrastructures: Contingency Management, Intelligent, Agent-Based, Cloud Computing and Cyber Security' (IWCI 2019).