I. Locci

发表

Development and evaluation of TiAl sheet structures for hypersonic applications

B. Tabernig, B. Lerch, G. Das, 2007 .

Coatings for Oxidation and Hot Corrosion Protection of Disk Alloys

C. Sudbrack, J. Nesbitt, T. Gabb, 2017 .

Transformation to Ni5Al3 in a 63.0 At. Pct Ni-Al alloy

G. M. Michal, K. Vedula, I. Locci, 1993 .

HARVESTING, HANDLING PRACTICES AND PROCESSING OF BLUEFIN TUNA CAPTURED IN THE TRAP FISHERY: POSSIBLE EFFECTS ON THE FLESH QUALITY

P. Addis, A. Cau, I. Locci, 2012 .

Body Temperature of the Atlantic Bluefin Tuna (Thunnus thynnus L.) in the Western Mediterranean

P. Addis, A. Cau, A. Corriero, 2009 .

Long Term Oxidation of Model and Engineering TiAl Alloys

M. Brady, J. Smialek, I. Locci, 2000 .

1300 K Creep Behavior of [001] Oriented Ni-49Al-1Hf (at.%) Single Crystals

J. Whittenberger, R. Darolia, R. Bowman, 1999 .

Elevated temperature strength and room-temperature toughness of directionally solidified Ni-33Al-33Cr-1Mo

S. Raj, J. Whittenberger, J. Salem, 2002 .

Effect of directionally solidified microstructures on the room-temperature fracture-toughness properties of Ni-33(at. pct)Al-33Cr-1Mo and Ni-33(at. pct)Al-31Cr-3Mo eutectic alloys grown at different solidification rates

S. Raj, J. Salem, I. Locci, 2002 .

Effects of annealing on the structure and electrical conductivity of CVD alumina films

G. M. Michal, I. Locci, P. Cheung, 1988 .

Structure of amorphous Fe–Cr–P alloys prepared by electrodeposition

T. Mitchell, P. Ng, I. Locci, 1989 .

Processing and microstructure of melt spun NiAl alloys

D. S. Lee, R. Noebe, M. Nathal, 1988 .

Correlation of deformation mechanisms with the tensile and compressive behavior of NiAl and NiAl(Zr) intermetallic alloys

S. Raj, R. Noebe, R. Bowman, 1992 .

ANTHROPOGENIC IMPACTS ON THE BLUEFIN TUNA (THUNNUS THYNNUS L.) TRAP FISHERY OF SARDINIA (WESTERN MEDITERRANEAN)

P. Addis, A. Cau, I. Locci, 2009 .

Effects of local scale perturbations in the Atlantic bluefin tuna (Thunnus thynnus L.) trap fishery of Sardinia (W. Mediterranean)

P. Addis, A. Cau, J. Dean, 2008 .

Influence of processing on the microstructure and mechanical properties of a NbAl_3-base alloy

S. Raj, M. Nathal, M. Hebsur, 1992 .

The Mechanical Properties of a Ni-30Al-20Fe-0.05Zr Intermetallic Alloy in the Temperature Range 300-1200 K

S. Raj, R. Noebe, I. Locci, 1990 .

Deformation behavior of a Ni−30Al−20Fe−0.05Zr intermetallic alloy in the temperature range 300 to 1300 K

S. Raj, R. Noebe, I. Locci, 1992 .

Effect of oxidation on the mechanical properties of a NbAl3 alloy at intermediate temperatures

S. Raj, M. Hebsur, J. Doychak, 1992 .

Microstructural characterization of a directionally-solidified Ni–33 (at.%) Al–31Cr–3Mo eutectic alloy as a function of withdrawal rate

S. Raj, I. Locci, 2001 .

Effect of growth rate on elevated temperature plastic flow androom temperature fracture toughness of directionally solidified NiAl-31Cr-3Mo

S. Raj, J. Whittenberger, J. Salem, 1999 .

Microstructure and Mechanical Properties of Cast, Homogenized and Aged NiAl Single Crystal Containing Hf

J. Whittenberger, M. Nathal, R. Darolia, 1992 .

On improving the fracture toughness of a NiAl-based alloy by mechanical alloying

D. Koss, M. Nathal, I. Locci, 1990 .

The role of rapid solidification processing in the fabrication of fiber reinforced metal matrix composites

R. Noebe, I. Locci, 1989 .

Effects of Pressure on the Flow and Fracture of Polycrystalline NiAl

J. Lewandowski, G. M. Michal, I. Locci, 1992 .

Yield point behavior in NiAl

J. Lewandowski, R. Noebe, I. Locci, 1993 .

Microstructure and Phase Stability of Single Crystal NiAl Alloyed with Hf and Zr

R. Noebe, J. Whittenberger, M. Nathal, 1996 .

Microstructure and mechanical properties of a single crystal NiAl alloy with Zr or Hf rich G-phase precipitates

R. Noebe, M. Nathal, R. Darolia, 1990 .

Third-Generation TiAl Alloy Tested: Exhibits Promising Properties for Rotating Components

J. Whittenberger, B. Lerch, S. Draper, 2004 .

A comparison between growth morphology of “Eutectic” cells/dendrites and single-phase cells/dendrites

S. Raj, I. Locci, S. N. Tewari, 2004 .

Development of High Temperature Dissimilar Joint Technology for Fission Surface Power Systems

T. Gabb, I. Locci, C. Bowman, 2009 .

Effects of Microalloying on the Microstructures and Mechanical Properties of Directionally Solidified Ni-33(at.%)Al-31Cr-3Mo Eutectic Alloys Investigated

S. Raj, J. Whittenberger, J. Salem, 2002 .

Al_2O_3 fiber strength degradation in metal and intermetallic matrix composites

S. Draper, I. Locci, 1994 .

Directionally Solidified NiAl-Based Alloys Studied for Improved Elevated-Temperature Strength and Room-Temperature Fracture Toughness

S. Raj, J. Whittenberger, J. Salem, 2000 .

Microstructural evolution and thermal stability in rapidly solidified high-chromium-containing copper alloys

J. D. Ayers, K. Cooper, J. Kampe, 1991 .

Very long term oxidation of Ti-48Al-2Cr-2Nb at 704 ° C in air

M. Brady, I. Locci, J. Smith, 1997 .

The oxidation and protection of gamma titanium aluminides

Michael P. Brady, James L. Smialek, Ivan E. Locci, 1996 .

A Preliminary Investigation of the Cr3Si-Mo Pseudo-Binary Phase Diagram

S. Raj, I. Locci, R. Dickerson, 1994 .

The influence of annealing in the ferrite-plus-austenite phase field on the stability of vanadium carbide precipitates

G. M. Michal, I. Locci, 1989 .

Analysis of Atlantic bluefin tuna catches from the last Tonnara in the Mediterranean Sea: 1993–2010

A. Sabatini, A. Cau, P. Addis, 2012 .

Demersal assemblages in two trawl fishing lanes located on the Baronie Seamount (Central Western Mediterranean)

F. Palmas, A. Sabatini, A. Cau, 2010, Journal of the Marine Biological Association of the United Kingdom.

Assemblages in a submarine canyon: influence of depth and time

A. Sabatini, A. Cau, M. C. Follesa, 2007, Hydrobiologia.

Materials Characterization of Additively Manufactured Components for Rocket Propulsion

James M. Free, Paul F. Senick, K. Cooper, 2015 .

Development and Hot-fire Testing of Additively Manufactured Copper Combustion Chambers for Liquid Rocket Engine Applications

D. Ellis, B. Lerch, P. Gradl, 2017 .

Analysis of microalloy precipitate reversion in steels

G. M. Michal, I. Locci, 1988 .

Materials Characterization of Electron Beam Melted Ti-6Al-4V

Richard E. Martin, B. Lerch, A. Garg, 2016 .

LCF Life of NiCr-Y Coated Disk Alloys After Shot Peening, Oxidation and Hot Corrosion

C. Sudbrack, J. Nesbitt, T. Gabb, 2020 .

Influences of Processing and Fatigue Cycling on Residual Stresses in a NiCrY-Coated Powder Metallurgy Disk Superalloy

R. A. Miller, J. Nesbitt, T. Gabb, 2017, Journal of materials engineering and performance (Print).

Retention of Compressive Residual Stresses Introduced by Shot Peening in a Powder Metal Disk Superalloy

T. Gabb, J. Telesman, S. Draper, 2016 .

Temporal trends in biodiversity of the middle-slope assemblages in Sardinian seas (Central-Western Mediterranean)

A. Sabatini, A. Cau, M. C. Follesa, 2013, Journal of the Marine Biological Association of the United Kingdom.

Effect of exposure on the mechanical properties of Gamma MET PX

M. Shazly, V. Prakash, B. Lerch, 2005 .

Advanced Stirling Duplex Materials Assessment for Venus Mission Heater Head Application

Frank J. Ritzert, Jonathan A. Salem, David L. Ellis, 2011 .

Impact of Powder Variability on the Microstructure and Mechanical Behavior of Selective Laser Melted Alloy 718

D. Ellis, C. Sudbrack, B. Lerch, 2018 .

Precipitation model validation in 3RD generation aeroturbine disc alloys

Jason Sebastian, A. Misra, David R. Hull, 2008 .