D. K. Sarma

发表

Surface and porous recast layer analysis in µ-EDM of MWCNT-Al2O3 composites

Meinam Annebushan Singh, P. Šajgalík, O. Hanzel, 2019, Materials and Manufacturing Processes.

Machinability analysis of multi walled carbon nanotubes filled alumina composites in wire electrical discharge machining process

Meinam Annebushan Singh, P. Šajgalík, O. Hanzel, 2017 .

Analysis of Material Removal and Surface Characteristics in Machining Multi Walled Carbon Nanotubes Filled Alumina Composites by WEDM Process

Meinam Annebushan Singh, H. Kalita, D. K. Sarma, 2017 .

A comparative study in machining of AISI D2 steel using textured and non-textured coated carbide tool at the flank face

Meinam Annebushan Singh, S. K. Rajbongshi, D. K. Sarma, 2018, Journal of Manufacturing Processes.

Multi-response optimisation of machining parameters to minimise the overcut and circularity error during micro-EDM of nickel-titanium shape memory alloy

D. K. Sarma, Souradeep Dutta, 2022, Advances in Materials and Processing Technologies.

EFFECT OF INTRAUTERINE IMMUNOTHERAPY ON UTERINE CELLULAR DYNAMICS AND CONCEPTION RATE IN ENDOMETRITIC COWS

M. Sinha, D. K. Sarma, M. P. Singh, 2014 .

Multi-objective optimization of hole dilation at inlet and outlet during machining of CFRP by μEDM using assisting-electrode and rotating tool

K. Debnath, D. K. Sarma, H. Dutta, 2020, The International Journal of Advanced Manufacturing Technology.

Improving the performance of µED-milling using assisting electrode for fabricating micro-channels in CFRP composites

K. Debnath, D. K. Sarma, H. Dutta, 2020 .

A study of material removal and surface characteristics in micro‐electrical discharge machining of carbon fiber‐reinforced plastics

K. Debnath, D. K. Sarma, H. Dutta, 2019, Polymer Composites.

Parametric and subsurface analysis of MWCNT alumina composites in WEDM process

Meinam Annebushan Singh, D. K. Sarma, 2018 .

Wire electrical discharge machining of MWCNT filled alumina composites

Meinam Annebushan Singh, P. Šajgalík, O. Hanzel, 2018 .

Surface characteristics and erosion phenomena in WEDM of alumina composites

Meinam Annebushan Singh, P. Šajgalík, O. Hanzel, 2018 .

A comparison of dry and air-cooled turning of grey cast iron with mixed oxide ceramic tool

Uday S. Dixit, Deba Kumar Sarma, U. S. Dixit, 2007 .

Machining with Minimal Cutting Fluid

J. Paulo Davim, Uday S. Dixit, Deba Kumar Sarma, 2012 .

A study in turning of AISI D2 steel with textured and non-textured coated carbide tool at the flank face

S. K. Rajbongshi, D. K. Sarma, 2020 .

Performance parameters studies in machining of AISI D2 steel with dot-textured, groove-textured & non-textured cutting tool at the flank face

S. K. Rajbongshi, D. K. Sarma, 2019, International Journal of Refractory Metals and Hard Materials.

A Brief Review of White Layer Formation in Hard Machining with a Case Study

Meinam Annebushan Singh, S. K. Rajbongshi, D. K. Sarma, 2020 .

A Detailed Comparison of Dry and Air-Cooled Turning

U. S. Dixit, J. Davim, D. K. Sarma, 2012 .

Mechanical Behavior of Recycled Pet Fiber Reinforced Concrete Matrix

D. K. Sarma, C. Marthong, 2015 .

Influence of PET fiber geometry on the mechanical properties of concrete: an experimental investigation

Deba Kumar Sarma, Comingstarful Marthong, D. K. Sarma, 2016 .

A comparative study in prediction of surface roughness and flank wear using artificial neural network and response surface methodology method during hard turning in dry and forced air-cooling condition

S. K. Rajbongshi, D. K. Sarma, 2019, International Journal of Machining and Machinability of Materials.

Environmentally Friendly Machining

Uday S. Dixit, Deba Kumar Sarma, U. S. Dixit, 2012 .

Neural network modelling of forces and indirect prediction of tool wear in turning of grey cast iron with ceramic tool

Uday S. Dixit, Deba Kumar Sarma, U. S. Dixit, 2010 .

Influence of Cutting Speed and Offset Distance over Cutting Tool Vibration in Multi-Tool Turning Process

S. Senthilvelan, R. Kalidasan, Deba Kumar Sarma, 2014 .

Effect of Offset Distance on Cutting Forces and Heat Generation in Multi-Tool Turning Process

S. Senthilvelan, R. Kalidasan, M. Yatin, 2014 .

Investigation on cutting of thin carbon fiber-reinforced polymer composite plate using sandwich electrode-assisted wire electrical-discharge machining

K. Debnath, D. K. Sarma, H. Dutta, 2021, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Experimental Investigation of Parametric Effects and Characterization of the Machined Surface in μED-milling of CFRP Composite

K. Debnath, D. K. Sarma, H. Dutta, 2022, Arabian Journal for Science and Engineering.

A Study of Wire Electrical Discharge Machining of Carbon Fibre Reinforced Plastic

K. Debnath, D. K. Sarma, H. Dutta, 2019 .

Investigation of performance characteristics amid nano powder mixed electrical discharge micro-milling on Hastelloy C 276

D. K. Sarma, H. Dutta, Souradeep Dutta, 2023, Machining Science and Technology.

Application of Taguchi’s Orthogonal Array and Overall Evaluation Criteria in Turning of AISI D2 Steel in Dry and Forced Air-Cooled Environment

S. K. Rajbongshi, D. K. Sarma, 2019 .

Influence of Different Tool Materials on the Machining Performance in µED-Milling of CFRP Composites

K. Debnath, D. K. Sarma, H. Dutta, 2020, Machining and Machinability of Fiber Reinforced Polymer Composites.

Optimizing processing parameters in electrical discharge milling of CFRP using metaheuristics

K. Debnath, D. K. Sarma, M. Roy Choudhury, 2024, Materials and Manufacturing Processes.