S. J. Harris

发表

An advantageous synchronous mission flight mode for three-stage launch vehicles.

S. J. Harris, 1968 .

Failure of high voltage electrical insulators with pultruded glass fibre-reinforced plastic cores

S. J. Harris, M. Owen, S. Harris, 1986 .

Sliding wear behaviour of electrodeposited cobalt–tungsten and cobalt–tungsten–iron alloys

P. H. Shipway, S. J. Harris, P. Shipway, 2003 .

Metallographic investigation of the damage caused to GRP by the combined action of electrical, mechanical and chemical environments

S. J. Harris, M. Owen, S. Harris, 1984 .

Fretting damage in locked coil steel ropes

I. R. McColl, S. J. Harris, R. B. Waterhouse, 1993 .

Fretting wear of a high-strength heavily work-hardened eutectoid steel

I. R. McColl, S. J. Harris, R. B. Waterhouse, 1994 .

Microstructure formation and corrosion behaviour in HVOF-sprayed Inconel 625 coatings

D. Zhang, S. J. Harris, D. G. McCartney, 2003 .

Analysis of microstructure formation in gas-atomised Al–12 wt.% Sn–1 wt.% Cu alloy powder

S. J. Harris, Paul D. Brown, D. G. McCartney, 2007 .

Lubricated fretting wear of a high-strength eutectoid steel rope wire

I. R. McColl, S. J. Harris, R. B. Waterhouse, 1995 .

Stress corrosion cracking of GRP pultruded rods in acid environments

S. J. Harris, M. Owen, S. Harris, 1983 .

The role of debris in the fretting wear of a SiC reinforced aluminium alloy matrix composite

I. R. McColl, S. J. Harris, R. B. Waterhouse, 2000 .

Strategic reinforcement of hybrid carbon fibre-reinforced polymer composites

S. J. Harris, P. Bradley, S. Harris, 1977 .