J. Wiskel

发表

Ultrasonic Velocity and Attenuation Measurements in L 80 Steel and their Correlation with Tensile Properties

H. Henein, D. Ivey, J. Kennedy, 2022 .

Strain measurement of forming process using digital imaging

H. Henein, A. Ben-Zvi, J. Wiskel, 2009 .

The Effect of Skelp Thickness on Precipitate Size and Morphology for X70 Microalloyed Steel Using Rietveld Refinement (Quantitative X-ray Diffraction)

H. Henein, D. Ivey, J. Wiskel, 2018, Crystals.

Strengthening Mechanisms and Their Relative Contributions to the Yield Strength of Microalloyed Steels

H. Henein, D. Ivey, O. Omotoso, 2012, Metallurgical and Materials Transactions A.

Matrix Dissolution Techniques Applied to Extract and Quantify Precipitates from a Microalloyed Steel

H. Henein, D. Ivey, O. Omotoso, 2011 .

Heat-flow-based analysis of surface crack formation during the start-up of the direct chill casting process: Part II. experimental study of an AA5182 rolling ingot

S. Cockcroft, J. Wiskel, 1996 .

Characterization of Precipitates in a Microalloyed Steel Using Quantitative X-ray Diffraction

H. Henein, D. Ivey, O. Omotoso, 2016 .

Effect of cold wire addition in tandem submerged arc welding on weld geometry and micro-hardness of heavy gauge X70 steel

H. Henein, D. Ivey, J. Wiskel, 2022, The International Journal of Advanced Manufacturing Technology.

The Effects of Finish Rolling Temperature and Cooling Interrupt Conditions on Precipitation in Microalloyed Steels Using Small Angle Neutron Scattering

H. Henein, D. Ivey, J. Wiskel, 2008 .

B-spline approximation methods for digital image reconstruction in strain measurement

Amos Ben-Zvi, Hani Henein, J. B. Wiskel, 2010 .

Characterization of X80 and X100 Microalloyed Pipeline Steel Using Quantitative X-ray Diffraction

H. Henein, D. Ivey, X. Li, 2018, Metallurgical and Materials Transactions B.

Assessment of Oxide Descaler Functionality in a Steel Hot Rolling Mill Using Infrared Video Imaging

H. Henein, J. Wiskel, A. Linchieh, 2018 .

Solidification Study of Aluminum Alloys Using Impulse Atomization: Part ii. Effect of Cooling Rate on Microstructure

E. Maire, H. Henein, J. Wiskel, 2002 .

Solidification Study of Aluminum Alloys using Impulse Atomization: Part I: Heat Transfer Analysis of an Atomized Droplet

E. Maire, H. Henein, J. Wiskel, 2002 .

Kinematic Behaviour of Microalloyed Steels Under Complex Forming Conditions

Hani Henein, J. B. Wiskel, H. Henein, 2004 .

Development of Microalloyed Steels for The Oil and Gas Industry

H. Henein, D. Ivey, J. Luo, 2014 .

Skelp Temperature Profile Control during Laminar Cooling using Genetic Algorithms

Amos Ben-Zvi, Hani Henein, B. Binesh, 2011 .

Infrared thermography of TMCP microalloyed steel skelp at upcoiler and its application in quantifying laminar jet/skelp interaction

Hani Henein, J. B. Wiskel, H. Henein, 2011 .

Strain aging on the yield strength to tensile strength ratio of UOE pipe

H. Henein, D. Ivey, J. Valloton, 2017 .

An Investigation of Aging Behaviour in Microalloyed Steel (X70) UOE Pipe

H. Henein, D. Ivey, J. Wiskel, 2016 .

87. An Investigation of Aging Behaviour in Microalloyed Steel (X70) UOE Pipe

H. Henein, J. Wiskel, J. Ma, 2015 .

Exploiting model fidelity to control metals processing

Huilan Shang, J. Fraser Forbes, Hani Henein, 2003 .

Heat-flow-based analysis of surface crack formation during the start-up of the direct chill casting process: Part I. development of the inverse heat-transfer model

S. Cockcroft, J. Wiskel, 1996 .

The effect of tempering conditions on carbides in P110 casing steels

H. Henein, D. Ivey, J. Wiskel, 2023, Materials Science and Technology.

Impact of heat on nanocrystalline silver dressings. Part II: Physical properties.

D. Mitlin, R. Burrell, P. Taylor, 2005, Biomaterials.

Ultrasonic Velocity Evaluation of Three Grades of Heat Treated Steel

H. Henein, D. Ivey, J. Kennedy, 2015 .

The effect of non-metallic inclusion morphology on the hydrogen induced cracking (HIC) resistance of L80 steel

H. Henein, D. Ivey, A. Hamilton, 2023, Journal of Materials Research and Technology.