S. Mirbagheri

发表

Experimental, Theoretical, and Numerical Investigations into the Compressive Behavior of Multi-layer Metallic Foam Filled Tubes

M. Salehi, S. Mirbagheri, A. Jafari Ramiani, 2022, Journal of Materials Engineering and Performance.

Study on microstructural events during hot rod rolling of steels using mathematical modelling

S.M.H. Mirbagheri, Siamak Serajzadeh, S. Serajzadeh, 2008 .

Investigation of Effective Parameters in Production of A356/ TiB2p Composite using TiB2p/CMC/PPS Mortar

S. Mirbagheri, M. Hizombor, A. Rezaie, 2012 .

Compressive and Energy Absorption Behavior of Multilayered Foam Filled Tubes

M. Salehi, S. Mirbagheri, M. Arabkohi, 2019, Metallurgical and Materials Transactions A.

Quasi Static Compressive Behavior of Al-Si-SiC-xFe Foam Filled Crash Boxes

S. Mirbagheri, M. J. Nayyeri, M. Ali, 2016 .

Production of A356–SiCP composite by an innovative casting process

S. Mirbagheri, S. Sookhtehsaraee, 2008 .

Simulation of Foaming and Deformation for Composite Aluminum Foams

H. Bayani, S. Mirbagheri, 2016 .

The Effect of Heat Treatment Parameters on Microstructure and Toughness of Austempered Ductile Iron (ADI)

S. Marashi, A. Abedi, S. Marashi, 2011 .

Simulation of unconstrained solidification of A356 aluminum alloy on distribution of micro/macro shrinkage

Mojtaba Barzegari, Hossein Bayani, S.M.H. Mirbagheri, 2014 .

CM88Y superalloy blade metallurgical degradation in a gas turbine

S. Mirbagheri, M. Najmi, 2023, Engineering Failure Analysis.

Deformation behavior of AA2017–SiCp in warm and hot deformation regions

S. Serajzadeh, J. Akhgar, S. Mirbagheri, 2015 .

Experimental and Numerical Analysis of Microstructure and High-Temperature Tensile Behavior of a Directionally Solidified Superalloy

S. Nakhodchi, S. Mirbagheri, J. Aghazadeh Mohandesi, 2021, Journal of Materials Engineering and Performance.

Multiphase Aluminum A356 Foam Formation Process Simulation Using Lattice Boltzmann Method pdf

Mojtaba Barzegari, Hossein Bayani, S. M. H. Mirbagheri, 2017, Journal of Materials Research and Technology.

3D computer simulation of melt flow and heat transfer in the lost foam casting process

S.M.H. Mirbagheri, N. Varahram, P. Davami, 2003 .

A model for determination of austenite decomposition kinetics during continuous cooling on the run-out table

S. Serajzadeh, S. Mirbagheri, 2006 .

2D Computer Simulation of Diffusion in Solids: Cu/Si and C/Fe Systems

A. Moshfegh, S. Mirbagheri, M. Shirinparvar, 1997 .

Modeling the effect of mould wall roughness on the melt flow simulation in casting process

S.M.H. Mirbagheri, P. Davami, Siamak Serajzadeh, 2004 .

Modelling and simulation of equiaxed dendritic structures permeability for Pb–Sn alloys

E. Khajeh, S. Mirbagheri, 2008 .

Erratum to: Modeling of the Equiaxed Dendrite Coarsening Based on the Interdendritic Liquid Permeability during Alloy Solidification

S. Mirbagheri, 2008 .

Modeling of permeability with the aid of 3D interdendritic flow simulation for equiaxed dendritic structures

P. Davami, E. Khajeh, S. Mirbagheri, 2008 .

Modeling of metalo-static pressure on the metal–mould interface thermal resistance in the casting process

S.M.H. Mirbagheri, A. Chirazi, A. Chirazi, 2007 .

Evaluation of failure mechanisms of high strength tailor-made metallic foams (TMFs)

S. Mirbagheri, M. J. Nayyeri, 2016 .

Deformation Behavior and Crashworthiness of Functionally Graded Metallic Foam-Filled Tubes Under Drop-Weight Impact Testing

M. Salehi, S. Mirbagheri, A. J. Ramiani, 2020, Metallurgical and Materials Transactions A.

High strength tailor-made metallic foams (TMFs): Development and characterization

S. Amirkhanlou, S. Mirbagheri, M. J. Nayyeri, 2015 .

Simulation of Si concentration effect on the permeability for columnar dendrite structures during solidification of Al–Si alloy

J. Silk, S. Mirbagheri, 2007 .

Modelling of metal flow during hot forging with regard to microstructural aspects

S.M.H. Mirbagheri, Siamak Serajzadeh, A. Karimi Taheri, 2004 .

Heat Treatment of Closed-Cell A356 + 4 wt.%Cu + 2 wt.%Ca Foam and Its Effect on the Foam Mechanical Behavior

H. Soltani, S. Mirbagheri, H. Vali, 2016, Journal of Materials Engineering and Performance.

Simulation of Liquid Flow Permeability for Dendritic Structures during Solidification Process

S. Firoozi, S. Mirbagheri, Mojtaba Barzegari, 2011 .

Simulation of mould filling in lost foam casting process

N. Varahram, P. Davami, S. Mirbagheri, 2003 .

Simulation of melt flow in coated mould cavity in the casting process

S.M.H. Mirbagheri, P. Davami, Siamak Serajzadeh, 2003 .

Micro–macro analysis of closed-cell aluminum foam with crushing behavior subjected to dynamic loadings

M. Sadighi, M. M. Aghdam, S. Talebi, 2017 .

Efficient energy absorption of functionally-graded metallic foam-filled tubes under impact loading

M. Salehi, S. Mirbagheri, A. J. Ramiani, 2021 .

Simulation of Interdendritic Liquid Permeability for Low and High Solid Fractions During Solidification of Mushy Alloys

S. Mirbagheri, 2006 .

Multiphase aluminum A 356 foam formation process simulation using lattice Boltzmann method

H. Bayani, S. Mirbagheri, Mojtaba Barzegari, 2019 .