H. Kwon

发表

Deoxidation and subsequent densification of sintered titanium by Ca deoxidizer

K. Roh, Chang-Youl Suh, Jung-Min Oh, 2016, Metals and Materials International.

A new method for the identification and quantification of magnetite-maghemite mixture using conventional X-ray diffraction technique.

K. Roh, K. Song, Sung-Wook Cho, 2012, Talanta.

Microstructure and mechanical properties of ultrafine (Ti,Mo,W,Nb,Zr,Ta)(CN)–Ni composites prepared using the stabilized (Ti,Mo,W,Nb,Zr,Ta)(CN) phase

H. Kwon, Chang-yul Suh, Ahram Moon, 2018 .

Effect of milling on properties and consolidation of AlN by high-frequency induction heated sintering

I. Shon, H. Kwon, Hyun-Su Oh, 2013, Electronic Materials Letters.

(Ti,W)C–Ni cermet prepared by high-energy ball milling and subsequent carbothermal reduction of TiO2–Ti–WO3–C mixture

D. Kil, K. Roh, Wonbaek Kim, 2014 .

Microstructure and mechanical properties of TiC-WC-(Ti,W)C-Ni cermets

H. Kwon, Sung-Wook Kang, Sungmo Kang, 2009 .

Preparation of Ti Ternary Alloys by Addition of Si to Ti-Mo Alloy Scraps for Carbonitride Application

K. Roh, Chang-Youl Suh, Jung-Min Oh, 2015 .

Ti-based solid solution carbonitrides prepared from Ti-alloy scraps via a hydrogenation-dehydrogenation process and high-energy milling

K. Roh, Wonbaek Kim, H. Kwon, 2015, Metals and Materials International.

Microstructure and mechanical properties of (Ti,W)C–Ni cermet prepared using a nano-sized TiC–WC powder mixture

Wonbaek Kim, H. Kwon, Chang-yul Suh, 2015 .

Preparation of a highly toughened (Ti,W)C-20Ni cermet through in situ formation of solid solution and WC whiskers

Wonbaek Kim, H. Kwon, Chang-yul Suh, 2015 .

Stability Domains of TiO2–Ti3O5–Ti2O3–TiC/Ti(CN) Systems During Reduction Process

Shinhoo Kang, H. Kwon, 2009 .

Sintering properties of Ti-6Al-4V-xMo powder prepared by addition of Mo to Ti-6Al-4V scraps and subsequent pulverization

K. Roh, Jung-Min Oh, Jaewon Lim, 2017, Metals and Materials International.

Effect of particle size and microstructure on the hydrogen storage property in a V–Ti–Cr solid solution system

K. Roh, Wonbaek Kim, Sung-Wook Cho, 2012 .

Mechanical properties of (Ti,V)C–Ni composite prepared using ultrafine solid-solution (Ti,V)C phase

K. Roh, Wonbaek Kim, H. Kwon, 2014 .

Stability Domains of NbC and Nb(CN) During Carbothermal Reduction of Niobium Oxide

Wonbaek Kim, Jiwoong Kim, H. Kwon, 2015 .

Finite temperature thermal expansion and elastic properties of (Hf1-xTax)C ultrahigh temperature ceramics

Y. Suh, Jiwoong Kim, H. Kwon, 2019, Ceramics International.

Elastic and electronic properties of partially ordered and disordered Zr(C1−xNx) solid solution compounds: A first principles calculation study

H. Jang, K. Roh, Jae-Hee Kim, 2015 .

(Ti,Cr)C Synthesized In Situ by Spark Plasma Sintering of TiC/Cr3C2 Powder Mixtures

Wonbaek Kim, H. Kwon, Sun-a Jung, 2015 .

Effects of Ni content and sintering temperature on the microstructure and mechanical properties of TiC-Ni composites fabricated by selective carburization of Ti-Ni alloys

H. Kwon, Chang-yul Suh, 2020 .

Properties of nanostructured TiC and TiC–TiAl3 hard materials rapidly sintered by the pulsed current activated heating

I. Shon, H. Kwon, Hyoung-Gon Jo, 2015 .

Properties and Rapid Consolidation of Nanostructured TiC and TiCTiAl Hard Materials by High-Frequency Induction Heating

I. Shon, H. Kwon, Hyoung-Gon Jo, 2014 .

Mechanical properties and consolidation of binderless nanostructured (Ti,Cr)C from mechanochemically-synthesized powder by high-frequency induction heating sintering

Jaewon Lim, I. Shon, H. Kwon, 2013 .

Rapid Consolidation and Mechanical Properties of Binderless Nanostructured (W,Ti)C by High-Frequency Induction Heating

I. Shon, Hyun-Su Kang, H. Kwon, 2013 .

Simultaneous Synthesis and Rapid Consolidation of Nanostructured (Ti,Mo)C and Its Mechanical Properties

I. Shon, H. Kwon, Hyoung-Gon Jo, 2013 .

Mechanochemical Synthesis and Rapid Consolidation of Nanostructured (Ti,Al,V)C by Pulsed Current Activated Heating and Its Mechanical Properties

I. Shon, H. Kwon, Hyun-Su Oh, 2013 .

Stability domains of Nb(CN) during the carburization/nitridation of metallic niobium

Wonbaek Kim, Jiwoong Kim, H. Kwon, 2014 .

Effect of Milling on the Carbothermal Reduction of Oxide Mixture for (Ti,W)C-Ni

Shinhoo Kang, H. Kwon, 2008 .

Bulk (Ti,Cr)N consolidated by pulsed current activated sintering and its mechanical properties

K. Roh, Sujeong Lee, Wonbaek Kim, 2013 .

Stability domains of (Ti,W)C and (Ti,W)(CN) during carbothermal reduction of TiO 2/WO3 mixture at 1500 K

Wonbaek Kim, Jiwoong Kim, H. Kwon, 2017 .

Preparation of Ti-Mo-Si alloy powders with enhanced high-temperature oxidation resistance using Ti-10Mo scraps

K. Roh, Wonbaek Kim, Chang-Youl Suh, 2015, Metals and Materials International.

Fabrication of TiC–ZrC–Co composites with refined microstructure using ultrafine TiC–ZrC mixture powders

Jiwoong Kim, H. Kwon, Chang-yul Suh, 2018 .

Hardening of Ti(CN)–Fe composites by microstructural refinement and solid solution strengthening of metallic phase

H. Kwon, Chang-yul Suh, 2021 .

Carbothermal reduction of Titanium monoxide (TiO)

Shinhoo Kang, H. Kwon, 2008 .

Improvement of the mechanical properties of titanium carbonitride-metal composites by modification of interfaces

H. Kwon, 2020 .

Solid-solution nanocrystallite formation by high-energy milling.

D. Kil, K. Roh, Sung-Wook Cho, 2013, Journal of nanoscience and nanotechnology.

High-temperature hydrogen-reduction process for the preparation of low-oxygen Mo powder from MoO3

Jung-Min Oh, Jaewon Lim, H. Kwon, 2017 .

Mechanochemical Synthesis and Rapid Consolidation of Binderless Nanostructured (Ti,V)C by Pulsed Current Activated Heating and Its Mechanical Properties

I. Shon, H. Kwon, Hyoung-Gon Jo, 2014 .

Role of Oxygen in the Ti3AlC2 MAX Phase in the Oxide Formation and Conductivity of Ti3C2-Based MXene Nanosheets.

S. Jung, Su Bin Choi, Jong-Woong Kim, 2023, ACS applied materials & interfaces.

Recycling and Applications of Titanium Alloy Scraps

Jung-Min Oh, Jaewon Lim, H. Kwon, 2013 .

Preparation of Low Oxygen Content Powder from Ti-6Al-4V and Ti-8Al-1Mo-1V Alloy Scraps with Deoxidation in Solid State Process

K. Roh, Chang-Youl Suh, Jung-Min Oh, 2015 .

Oxygen behavior during non-contact deoxidation of titanium powder using calcium vapor

Wonbaek Kim, Jung-Min Oh, Jaewon Lim, 2014 .

Investigation of the conditions required for the formation of (Ti,W)(CN) during carburization of titanium under nitrogen

Wonbaek Kim, Jiwoong Kim, H. Kwon, 2017 .

Solid solution cermet: (Ti,Nb)(CN)-Ni cermet.

H. Kwon, Sun-a Jung, 2014, Journal of nanoscience and nanotechnology.

Stability domain of Ti(CN) in Ti–TiC–TiN

Shinhoo Kang, H. Kwon, 2012 .

Development of a Highly Flexible Composite Electrode Comprised of Ti3C2-Based MXene Nanosheets and Ag Nanoparticles

C. Han, Su Bin Choi, Jong‐Woong Kim, 2021, Electronic Materials Letters.

Preparation of low oxygen content alloy powder from Ti binary alloy scrap by hydrogenation–dehydrogenation and deoxidation process

K. Roh, Wonbaek Kim, Chang-Youl Suh, 2014 .

Synthesis of nickel nanopowders in microemulsion

Shinhoo Kang, De-sheng Ai, Xiaming Dai, 2003 .

Instability of solid–liquid interface in transitional metal–carbide systems

Shinhoo Kang, H. Kwon, 2006 .

Premixed TiC–Ni composite powder prepared by mechanical milling of Ti–Ni alloy/graphite mixture and subsequent heat treatment

D. Kil, K. Roh, Wonbaek Kim, 2014 .

Comparison of deoxidation capability for preparation of low oxygen content powder from TiNi alloy scraps

K. Roh, Wonbaek Kim, Chang-Youl Suh, 2014 .

Effect of α-lath size on the mechanical properties of Ti–6Al–4V using core time hydrogen heat treatment

Jung-Min Oh, Jaewon Lim, H. Kwon, 2020 .

Preparation of a fine-structured TiC–Co composite by high-energy milling and subsequent heat treatment of a Ti–Co alloy

Wonbaek Kim, Jung-Min Oh, H. Kwon, 2015 .

Highly toughened dense TiC–Ni composite by in situ decomposition of (Ti,Ni)C solid solution

K. Roh, Wonbaek Kim, Jiwoong Kim, 2015 .

Temperature dependent phase stability of Ti(C1−xNx) solid solutions using first-principles calculations

Jiwoong Kim, H. Kwon, Chang Woo Kwon, 2017 .

Effect of Substitutional Oxygen on Properties of Ti3C2Tx MXene Produced Using Recycled TiO2 Source

Y. Gogotsi, C. Koo, Zhenguo Gao, 2023, Small methods.

Prediction of solid solution characteristics of MC (M = Zr, Nb, and Ta) in TiC lattice using phase stability diagrams

Jiwoong Kim, H. Kwon, Ahram Moon, 2019, Journal of the American Ceramic Society.

Phase Stability Diagrams of Ti–M–O–C (M = Zr, Hf, Nb, and Ta) Systems at 1800 K

Jiwoong Kim, H. Kwon, Ahram Moon, 2018, Metals and Materials International.