Chongda Wang

发表

Injection Molded Strong Polypropylene Composite Foam Reinforced with Rubber and Talc

Guilong Wang, Chul B. Park, Jinchuan Zhao, 2019 .

Microcellular injection molded outstanding oleophilic and sound-insulating PP/PTFE nanocomposite foam

Chul B. Park, Guilong Wang, Zuolong Chen, 2021 .

Poly(vinylidene fluoride) foams: a promising low-k dielectric and heat-insulating material

Chul B. Park, Biao Zhao, Chongxiang Zhao, 2018 .

Solubility and diffusivity of CO2 and N2 in TPU and their effects on cell nucleation in batch foaming

Chul B. Park, Ruosong Li, L. Mark, 2019 .

The critical requirement for high-pressure foam injection molding with supercritical fluid

Chul B. Park, V. Shaayegan, F. Costa, 2021, Polymer.

Development of high thermal insulation and compressive strength BPP foams using mold-opening foam injection molding with in-situ fibrillated PTFE fibers

Chul B. Park, B. Guo, Qingliang Zhao, 2018 .

Ultra-lightweight, super thermal-insulation and strong PP/CNT microcellular foams

Chul B. Park, Guilong Wang, Jinchuan Zhao, 2020 .

Carbon as a Solution for Nanocellular Foam Superinsulation

Chul B. Park, Pengjian Gong, Chongda Wang, 2021, SSRN Electronic Journal.

Modelling of thermal transport through a nanocellular polymer foam: toward the generation of a new superinsulating material.

Chul B. Park, Guoqun Zhao, Guilong Wang, 2017, Nanoscale.

Incorporating a microcellular structure into PVDF/graphene–nanoplatelet composites to tune their electrical conductivity and electromagnetic interference shielding properties

Chul B. Park, Ruosong Li, Biao Zhao, 2018 .

Accurate theoretical modeling of cell growth by comparing with visualized data in high-pressure foam injection molding

Chul B. Park, M. Ataei, M. Bussmann, 2019, European Polymer Journal.

Ultra-tough and super thermal-insulation nanocellular PMMA/TPU

Chul B. Park, Guoqun Zhao, L. Mark, 2017 .

Investigation of the mold-filling phenomenon in high-pressure foam injection molding and its effects on the cellular structure in expanded foams

Chul B. Park, H. Heim, V. Shaayegan, 2019, Polymer.

High thermal insulation and compressive strength polypropylene foams fabricated by high-pressure foam injection molding and mold opening of nano-fibrillar composites

Chul B. Park, B. Guo, Qingliang Zhao, 2017 .

Wrong expectation of superinsulation behavior from largely-expanded nanocellular foams.

Chul B. Park, M. Alshrah, Guilong Wang, 2020, Nanoscale.

Achieving wideband microwave absorption properties in PVDF nanocomposite foams with an ultra-low MWCNT content by introducing a microcellular structure

Chul B. Park, Ruosong Li, Biao Zhao, 2020 .

Lightweight and strong fibrillary PTFE reinforced polypropylene composite foams fabricated by foam injection molding

Chul B. Park, Guoqun Zhao, Lei Zhang, 2019, European Polymer Journal.

Lightweight and tough PP/talc composite foam with bimodal nanoporous structure achieved by microcellular injection molding

Chul B. Park, Guilong Wang, Jinchuan Zhao, 2020 .

Simulation of Cell Growth in High-pressure Foam Injection Molding

Chongda Wang, 2017 .

Effect of the melt compressibility and the pressure drop rate on the cell-nucleation behavior in foam injection molding with mold opening

Chul B. Park, V. Shaayegan, F. Costa, 2017 .

Supercritical CO2 utilization for development of graded cellular structures in semicrystalline polymers

Chul B. Park, M. Bussmann, V. Shaayegan, 2021 .

Correction: Modelling of thermal transport through a nanocellular polymer foam: toward the generation of a new superinsulating material.

Chul B. Park, Guoqun Zhao, Guilong Wang, 2018, Nanoscale.

Numerical analysis of the effect of the local variation of viscosity on bubble growth and deformation in polymer foaming

Chul B. Park, M. Ataei, M. Bussmann, 2019, Journal of rheology.