C. Sandberg

发表

MECHANICAL PULPING.Effect of long fibre concentration on low consistency refining of mechanical pulp

Christer Sandberg, Per Engstrand, P. Engstrand, 2012 .

Theoretical analysis of LC-refining – pressure screening systems in TMP

J. Olson, Mark Martinez, C. Sandberg, 2019, Nordic pulp & paper research journal.

Low consistency refining combined with screen fractionation: Reduction of mechanical pulping process complexity

P. Engstrand, C. Sandberg, J. Berg, 2018, BioResources.

Effects of chip pretreatment and feeding segments on specific energy and pulp quality in TMP production

P. Engstrand, B. Engberg, C. Sandberg, 2018, Nordic Pulp & Paper Research Journal.

Mill scale production of TMP with double disk refining-The effects of a mild sulfonation, atmospheric preheating and refining temperatures

M. Paulsson, P. Engstrand, B. Engberg, 2016 .

Mechanical Pulping: Energy efficiency in double disc refining -Influence of intensity by segment design

Christer Sandberg, Per Engstrand, Lars Sundström, 2011 .

The effect of rotor position on pulp properties in a twozoned low consistency refiner

Stefan Andersson, Christer Sandberg, Per Engstrand, 2012 .

Removal of dissolved and colloidal substances in water from compressive pre-treatment of chips using dissolved air flotation. Pilot trial

Jan Hill, L. Johansson, P. Stenius, 2011 .

Paper properties of TMP and CTMP handsheets from spruce, as affected by the press load and temperature during sheet drying

H. Höglund, C. Sandberg, Niklas Klinga, 2007 .

Paper properties of TMP and CTMP handsheets from spruce, as affected by the solids content from pressing

H. Höglund, C. Sandberg, Niklas Klinga, 2007 .

Development of fibre properties in mill scale high- and low consistency refining of thermomechanical pulp (Part 1)

G. Daniel, Dinesh Fernando, C. Sandberg, 2020 .

On the development of the refiner mechanical pulping process – a review

Christer Sandberg, Jan Hill, Michael Jackson, 2020, Nordic Pulp & Paper Research Journal.

Low dosage sulfite pretreatment at different refining temperatures in mill scale TMP production

M. Paulsson, P. Engstrand, C. Sandberg, 2017 .

Low dosage sulfite pretreatment in a modern TMP-line

G. Daniel, P. Engstrand, Dinesh Fernando, 2015 .

Process intensification in mechanical pulping

P. Engstrand, C. Sandberg, J. Berg, 2017 .

Low-consistency refining of mechanical pulp in the light of forces on fibres

Christer Sandberg, Per Engstrand, Birgitta A. Engberg, 2015 .

Comparison of mechanical pulps from two stage HC single disc and HC double disc - LC refining

Stefan Andersson, Christer Sandberg, Per Engstrand, 2012 .

The effect of process conditions on pulp quality development at low consistency refining of mechanical pulp - TMP

L. Salmén, L. Hammar, C. Sandberg, 2009 .

New TMP-line improves pulp quality and reduces energy consumption

C. Sandberg, Erik Nelsson, L. Sundström, 2011 .

Mill evaluation of an intensified mechanical pulping process

Jan-Erik Berg, Christer Sandberg, Per Engstrand, 2017 .