Ghassan T. Kridli

发表

Development of a Parametric Model for Advanced Vehicle Design

Vivek Bhise, Ghassan T. Kridli, Huzefa Mamoola, 2004 .

Investigation of thickness variation and corner filling in tube hydroforming

Ghassan T. Kridli, L. Bao, P. K. Mallick, 2003 .

Edge Stretch Performance of 6DR1 Aluminum in Typical Automotive Blanking Conditions by Nicholas Robert Kalweit A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Engineering

Andrey M. Ilinich, Ghassan T. Kridli, Hong Tae Kang, 2017 .

Design and analysis of a conceptual modular aluminum spaceframe platform

Ghassan T. Kridli, Shawn R. Devaraj, Roger Shulze, 2005 .

Experimentally Validated Thermo-Mechanically Coupled FE Simulations of Al/Mg Friction Stir Welded Joints

Ramsey F. Hamade, A. H. Ammouri, Ghassan T. Kridli, 2013 .

Tensile and Fatigue Behavior of Friction-Stir Welded Tailor-Welded Blank of Aluminum Alloy 5754

Ghassan T. Kridli, P. K. Mallick, G. Kridli, 2010 .

Formability prediction of aluminum sheet alloys under isothermal forming conditions

Ghassan T. Kridli, Georges Ayoub, Peter A. Friedman, 2015 .

Formability Improvement in Aluminum Tailor-Welded Blanks via Material Combinations☆

Ghassan T. Kridli, Peter A. Friedman, Amit V. Bhagwan, 2004 .

A visco-hyperelastic damage model for cyclic stress-softening, hysteresis and permanent set in rubber using the network alteration theory

Moussa Nait-Abdelaziz, Ghassan T. Kridli, Georges Ayoub, 2014 .

Formability of Aluminum Tailor-Welded Blanks

Andrew M. Sherman, Ghassan T. Kridli, G. Kridli, 2000 .

Intermetallic Compound Formation in Al/Mg Friction Stir Welded (FSW) Butt Joints

Ramsey F. Hamade, Ghassan T. Kridli, Georges Ayoub, 2014 .

Validation of a modified material model for use with shell elements to improve the predictive accuracy of the thickness distribution in superplastic forming of sheet metals

Ghassan T. Kridli, S. George Luckey, Peter A. Friedman, 2011 .