P. Bhagwat

发表

Physics and technology for development of accelerator driven systems in India

S. Krishnagopal, A. Sinha, S. Degweker, 2017 .

Radiation-induced segregation in austenitic stainless steel type 304: Effect of high fraction of twin boundaries

S. C. Sharma, S. Sharma, V. Kain, 2011 .

Improving resistance of austenitic stainless steel to irradiation damage

S. Kailas, S. Sharma, V. Kain, 2009 .

Measurement of the 238U(n,γ)239U and 238U(n,2n)237U Reaction Cross Sections Using a Neutron Activation Technique at Neutron Energies of 8.04 and 11.90 MeV

S. Suryanarayana, S. Sharma, H. Naik, 2014 .

Measurement of the neutron capture cross-section of 238U using the neutron activation technique

S. Ganesan, V. Bhoraskar, S. Dhole, 2012, Journal of Radioanalytical and Nuclear Chemistry.

Measurement of the 232Th(n, γ)233Th and 232Th(n, 2n)231Th reaction cross-sections at neutron energies of 8.04 ± 0.30 and 11.90 ± 0.35 MeV

G. Sanjeev, A. Mohanty, S. Ganesan, 2012 .

Measurement of 232Th(n, γ) and 232Th(${n}, {2n}$) cross-sections at neutron energies of 13.5, 15.5 and 17.28 MeV using neutron activation techniques

P. D. Krishnani, A. Mohanty, A. Mohanty, 2012 .

Thermal analysis and neutron production characteristics of a low power copper beam dump-cum-target for LEHIPA

A. Saxena, V. Verma, Y. Sawant, 2016 .

Structural, optical, thermo-mechanical and transport properties of ion irradiated polymer membranes

M. Singh, N. K. Acharya, K. Awasthi, 2006 .

Effect of prior cold-work on radiation-induced segregation in proton-irradiated austenitic stainless steel

S. C. Sharma, V. Kain, I. Samajdar, 2012 .

The role of niobium carbide in radiation induced segregation behaviour of type 347 austenitic stainless steel

V. Kain, I. Samajdar, Parag M. Ahmedabadi, 2011 .

Electrochemical Evaluation of Radiation-Induced Segregation in Austenitic Stainless Steels with Oversize Solute Addition

S. C. Sharma, S. Sharma, V. Kain, 2012, Journal of Materials Engineering and Performance.

Radiation-induced segregation in desensitized type 304 austenitic stainless steel

S. C. Sharma, V. Kain, I. Samajdar, 2011 .

Track etch membranes (TEMs) for separation sciences from BARC-TIFR Pelletron accelerator

S. Kailas, P. Bhagwat, P. Surendran, 2014, Journal of Radioanalytical and Nuclear Chemistry.

Beam acceleration through proton radio frequency quadrupole accelerator in BARC

S. Krishnagopal, M. Pande, P. Bhagwat, 2016 .

Instrumentation of KGF nucleon decay experiment

V. S. Narasimham, S. Dugad, N. Mondal, 1989 .

Thermal evolution of boron irradiation induced defects in predoped Si revealed by positron annihilation experiments

P. Nambissan, M. B. Kurup, P. Bhagwat, 2007 .

Optimization of the radial matching section for the prototype RFQ

P. Bhagwat, N. Mehrotra, M. Kurup, 2005 .

DESIGN STUDY OF ALTERNATE INJECTOR AT PELLETRON ACCELERATOR FACILITY

S. Kailas, N. Mehrotra, A. K. Gupta, 2008 .

Status report on the folded tandem ion accelerator at BARC

B. K. Jain, S. Gupta, S. Kailas, 2002 .

RF characterization and testing of ridge waveguide transitions for RF power couplers

R. Kumar, G. Kumar, P. Bhagwat, 2016 .

DEVELOPMENTAL ACTIVITIES AT BARC-TIFR PELLETRON ACCELERATOR FACILITY

R. Choudhury, P. Bhagwat, A. Gupta, 2009 .

Impact of phosphorus ion implantation on the material and optical properties of InAs/GaAs quantum dots

S. Upadhyay, A. Mandal, V. Chavan, 2018, OPTO.

Defect annihilation-mediated enhanced activation energy of GaAs 0.979 N 0.021 -capped InAs/GaAs quantum dots by H − ion implantation

S. Chakrabarti, S. Gupta, A. Balgarkashi, 2017 .