Wolf Reinhardt

发表

ASME Section III Flaw Tolerance Sample Problem for Fatigue Design of Nuclear System Components

Keith Wright, David J. Dewees, Paul Hirschberg, 2014 .

Yield Criteria for the Elastic-Plastic Design of Tubesheets With Triangular Penetration Pattern

Wolf Reinhardt, 2001 .

A Noncyclic Method for Plastic Shakedown Analysis

Wolf Reinhardt, W. Reinhardt, 2008 .

Ratchet Boundary Determination Using a Noncyclic Method

R. Adibi-Asl, Wolf Reinhardt, 2010 .

Comparison Between Cyclic Testing and Analysis of Piping Bends With Local Thinning

Xinjian Duan, Wolf Reinhardt, 2014 .

Investigation of the Elastic-Plastic Design Method in Section VIII Div. 2

Wolf Reinhardt, 2009 .

Comparison of Plastic Collapse Load of Isolated Piping Part and Pipe Run

Wolf Reinhardt, 2016 .

On the Constraint-Based Failure Assessment for Surface Cracked Welded Plates Under Tension

Wolf Reinhardt, X. Wang, 2003 .

Strain Measures for Fatigue Assessment Using Elastic-Plastic FEA

Wolf Reinhardt, 2005 .

A Modeling Approach for Interlinked Feeder Pipes in CANDU® Reactors

Wolf Reinhardt, Nima Zobeiry, 2009 .

Elastic-Plastic Shakedown Assessment of Piping Using a Non-Cyclic Method

Wolf Reinhardt, 2007 .

The Effect of Torsion on Moment Capacity in Piping Bends

Wolf Reinhardt, Bijan Azadi-Borujemi, Ali Asadkarami, 2015 .

Fatigue Evaluation for Section III, Class 1 Components Using Flaw Tolerance Method to Consider Environmental Effects

David J. Dewees, Wolf Reinhardt, David Hoke Roarty, 2015 .

Investigation of Flexibility Factors and Stress Indices for Class 1 Curved Piping

Wolf Reinhardt, Nima Zobeiry, Ali Asadkarami, 2010 .

Comparison of Elastic-Plastic Analysis and Experimental Result for Locally Thinned Pipe

Xinjian Duan, Wolf Reinhardt, 2010 .

Effect of Ovality on Shakedown of Pipe Bends

Wolf Reinhardt, Nima Zobeiry, Ali Asadkarami, 2010 .

A Modelling Approach for Inter-Linked Feeder Pipes in CANDU Reactors

Wolf Reinhardt, Nima Zobeiry, 2007 .

Shakedown and Ratcheting in ASME B&PV Code

R. Adibi-Asl, Wolf Reinhardt, 2015 .

Analysis of a Tubesheet Undergoing Rapid Transient Thermal Loading

Wolf Reinhardt, R. Kizhatil, G. H. McClellan, 2000 .

Analysis of the Effective Seismic Support Damping in a Class I Piping System

Wolf Reinhardt, Nima Zobeiry, 2008 .

Validation of Thermal Stress Ratcheting Criteria

Wolf Reinhardt, Suzanne McKillop, Vangala Reddy, 2014 .

Application of Elastic-Plastic Finite Element Analysis to Determine the Ultimate Load of Components

Wolf Reinhardt, 2015 .

Assessment of the Twice-Yield Method for Elastic-Plastic Fatigue Analysis

Wolf Reinhardt, W. Reinhardt, 2006 .

Effect of Helical Coil Repair on the Fatigue Life of Studs

Wolf Reinhardt, Deepak Dhar, Nansheng Sun, 2003 .

Computer technology and applications : presented at the 2003 Pressure Vessels and Piping Conference, Cleveland, Ohio, July 20-24, 2003

Piping Division, Wolf Reinhardt, J. Martin, 2003 .

On the Assessment of Through-Wall Circumferential Cracks in Steam Generator Tubes With Tube Supports

Xin Wang, Wolf Reinhardt, Xin Wang, 2003 .

Information Modelling and Simulation in Large Interdependent Critical Infrastructures in IRRIIS

Erich Rome, Rüdiger Klein, Wolf Reinhardt, 2008, CRITIS.

Implications of Limit Analysis on the Evaluation of Locally Thinned Vessels and Pipes

Wolf Reinhardt, Nima Zobeiry, 2009 .

Optimization for Nuclear Class 1 Opening Reinforcement

Wolf Reinhardt, 2021, Volume 2: Computer Technology and Bolted Joints; Design and Analysis.

Equivalent Solid Based Fatigue Analysis of Perforated Plates with Triangular Perforation Pattern

Wolf Reinhardt, 2002 .

A Non-Cyclic Method for Plastic Shakedown Analysis

Wolf Reinhardt, W. Reinhardt, 2003 .

Limit Load Bounds for the mα Multiplier

R. Seshadri, Wolf Reinhardt, R. Seshadri, 2003 .

Calculation of stress intensity factors for cracks of complex geometry and subjected to arbitrary nonlinear stress fields

Wolf Reinhardt, G. Glinka, 2000 .