Xianwu Du

发表

Microstructure and Mechanical Properties of Wire Arc Additively Manufactured MoNbTaWTi High Entropy Alloys

Z. Cai, Rui Wang, Hai-dou Wang, 2021, Materials.

Combination of enhanced thermal conductivity and strength of MWCNTs reinforced Mg-6Zn matrix composite

Zhao-hui Wang, Ke Liu, Shu-bo Li, 2020 .

Mechanical Properties of Carbon Nanotubes Reinforced AZ91 Composites by Enhanced Interfacial Bonding

G. Han, Zhao-hui Wang, Ke Liu, 2017 .

Microstructure and Creep Behaviors of As-Cast Mg-Zn-Er Alloys

Zhao-hui Wang, Ke Liu, W. Du, 2017 .

Microstructures and mechanical properties of B4C–SiC intergranular/intragranular nanocomposite ceramics fabricated from B4C, Si, and graphite powders

Jinyong Zhang, Z. Fu, Weimin Wang, 2014 .

Cooling rate controlled basal precipitates and age hardening response of solid-soluted Mg–Gd–Er–Zn–Zr alloy

W. Du, Xianwu Du, Jinlong Fu, 2020 .

Preparation of B4C–SiC composite ceramics through hot pressing assisted by mechanical alloying

Hao Wang, Weimin Wang, Z. Fu, 2013 .

Synthesis mechanism and mechanical properties of TiB2–SiC composites fabricated with the B4C–TiC–Si system by reactive hot pressing

W. Xing, Jilin Wang, Z. Fu, 2015 .

Influence of the residual oxygen amount in reduced graphene nanoplatelets on microstructure and mechanical properties of ZK60 matrix composites

Ke Liu, Shu-bo Li, W. Du, 2022, Materials Science and Engineering: A.

Effective dispersion of multi-walled carbon nanotubes in aqueous solution using an ionic-gemini dispersant.

W. Du, Chenchen Zhao, Fanjing Meng, 2018, Journal of colloid and interface science.

Effect of the Ca2Mg6Zn3 Phase on the Corrosion Behavior of Biodegradable Mg-4.0Zn-0.2Mn-xCa Alloys in Hank’s Solution

Jun Fu, Zhao-hui Wang, Ke Liu, 2022, Materials.

Synthesis and structural evolution of B4C–SiC nanocomposite powders by mechanochemical processing and subsequent heat treatment

Jilin Wang, Yucheng Wang, Z. Fu, 2014 .

Hot‐Pressing Kinetics and Densification Mechanisms of Boron Carbide

Hao Wang, Jilin Wang, Z. Fu, 2015 .

Effects of silicon addition on the microstructure and properties of B4C–SiC composite prepared with polycarbosilane-coated B4C powder

Yang Wang, Z. Fu, Weimin Wang, 2015 .

Effective Dispersion of CNTs to Fabricate CNT/Mg Nanocomposite

G. Han, Zhao-hui Wang, Ke Liu, 2015 .

Simultaneously improved mechanical and thermal properties of Mg-Zn-Zr alloy reinforced by ultra-low content of graphene nanoplatelets

Zhao-hui Wang, Ke Liu, Shu-bo Li, 2021 .

Microstructure and corrosion behaviors of as-rolled Mg-Zn-Er alloy sheets

Jun Fu, Zhao-hui Wang, Ke Liu, 2022, Transactions of Nonferrous Metals Society of China.

Progress in Light-weight High Entropy Alloys

Jun Liu, Z. Cai, Shaofu Huang, 2021, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Microstructure and mechanical properties of the as-cast Mg-Zn-Mn-Ca alloys

Jun Fu, Zhao-hui Wang, Ke Liu, 2017 .

Effect of temperature on microstructure and texture evolution of Mg-Zn-Er alloy during hot compression

Zhao-hui Wang, Ke Liu, Shu-bo Li, 2018, Transactions of Nonferrous Metals Society of China.

Effects of Deformation Temperatures on Microstructures, Aging Behaviors and Mechanical Properties of Mg-Gd-Er-Zr Alloys Fabricated by Hard Plate Rolling

Ke Liu, Shu-bo Li, W. Du, 2022, SSRN Electronic Journal.

Microstructures and mechanical properties of Mg-6Gd-1Er-0.5Zr alloy sheets produced with different rolling temperatures

Zhao-hui Wang, Ke Liu, Shu-bo Li, 2021, Journal of Alloys and Compounds.

Hot deformation behaviors and processing maps of Mg–Zn–Er alloys based on Gleeble–1500 hot compression simulation

Zhao-hui Wang, Ke Liu, Shu-bo Li, 2016 .

Obtaining Ultra-High Strength and Ductility in a Mg–Gd–Er–Zn–Zr Alloy via Extrusion, Pre-deformation and Two-Stage Aging

Zhao-hui Wang, Ke Liu, Shu-bo Li, 2020, Acta Metallurgica Sinica (English Letters).

Synthesis of boron nitride nanotubes using glass fabrics as catalyst growth framework

Jilin Wang, Z. Fu, Weimin Wang, 2015 .

Synergistic Effects of Carbon Nanotube (CNT) and Reduced Graphene Oxide (RGO) on Mechanical and Thermal Properties of ZK61 Alloy

Ke Liu, Shu-bo Li, W. Du, 2023, Acta Metallurgica Sinica (English Letters).

Microstructure and Mechanical Properties of AIN Particles Reinforced Magnesium Matrix Composites with In Situ Synthesis Process

Zhao-hui Wang, Ke Liu, W. Du, 2016 .

Densification mechanism during reactive hot pressing of B4C-ZrO2 mixtures

Z. Fu, Weimin Wang, Hao Wang, 2018, Journal of the European Ceramic Society.

Growth mechanism and ultraviolet-visible property of novel thick-walled boron nitride nanostructures

Jilin Wang, Yucheng Wang, Z. Fu, 2014 .

Microstructure and properties of B4C-SiC composites prepared by polycarbosilane-coating/B4C powder route

Hao Wang, Z. Fu, Weimin Wang, 2014 .

Effects of curing under step-by-step load on mechanical and deformation properties of cemented gangue backfill column

Ting Qi, Guo-rui Feng, Zehua Wang, 2020, Journal of Central South University.

Microstructure and Corrosion Resistance of Underwater Laser Cladded Duplex Stainless Steel Coating after Underwater Laser Remelting Processing

Z. Cai, Xiangdong Jiao, Xianwu Du, 2021, Materials.

Simultaneously Enhanced Thermal and Mechanical Properties of ZK60 Alloy Reinforced by Oriented Graphene Nanoplatelets

Ke Liu, Shu-bo Li, W. Du, 2023, Acta Metallurgica Sinica (English Letters).

Simultaneously enhanced thermal conductivity and mechanical performance of carbon nanotube reinforced ZK61 matrix composite

Ke Liu, Shu-bo Li, W. Du, 2023, Journal of Magnesium and Alloys.

Microstructure and Mechanical Properties of Magnesium Matrix Composites Reinforced by In Situ Reduced Graphene Oxide

Shu-bo Li, W. Du, F. Liu, 2023, Materials.