D. Oloruntoba

发表

Temperature effects on microstructure and mechanical properties of sintered high-entropy equiatomic Ti20V20Al20Fe20Cr20 alloy for aero-gear application

A. Popoola, O. Popoola, A. Afolabi, 2020, The International Journal of Advanced Manufacturing Technology.

Effect of Shakeout Time on Microstructure and Hardness Properties of Grey Cast Iron

I. O. Otunniyi, D. Oloruntoba, S. O. Seidu, 2014 .

Development of carbon anode for cathodic protection of mild steel in chloride environment

P. Popoola, D. Oloruntoba, A. Osundare, 2018 .

Electrochemical and Weight Loss Studies of the Corrosion Profiles of Gray Cast Iron Under the Influence of Water Hyacinth Plant Extract in 0.5 M Naoh

D. Oloruntoba, Ojo Friday Abraham, Daniel Damilola Alewi, 2022, SSRN Electronic Journal.

Studies on Thermal Stability, Shelf Life and Electrochemical Measurement of Methanol Extract of Air Dried Alchornea Laxiflora Leaves in Corrosion Prevention

L. Lajide, E. F. Olasehinde, M. G. Ajayi, 2019, American Journal of Materials Synthesis and Processing.

Effect of Bath Parameters on Electroless Ni-P and Zn-P Deposition on 1045 Steel Substrate

A. Popoola, C. Loto, D. Oloruntoba, 2014 .

Corrosion of Heat Treated Electroless-Ni Plated Mild Carbon Steels in Dilute H 2 SO 4

O. O. Ajibola, D. Oloruntoba, A. Adebayo, 2015 .

Effect of some process variables on nickel electroplating of low carbon steel

O. Oluwole, D. Oloruntoba, O. Eghwubare, 2015 .

Effects of Hard Surface Grinding and Activation on Electroless-Nickel Plating on Cast Aluminium Alloy Substrates

O. O. Ajibola, B. O. Adewuyi, D. Oloruntoba, 2014 .

Effects of Moulding Sand Permeability and Pouring Temperatures on Properties of Cast 6061 Aluminium Alloy

O. O. Ajibola, B. O. Adewuyi, D. Oloruntoba, 2015 .

Corrosion Mitigation of Gray Cast Iron and Aluminum in NaOH Using Water Hyacinth (Eichhornia crassipes) Plant Extract

O. Adesina, K. Akinluwade, D. Oloruntoba, 2019, Chemical Science International Journal.

Microstructural and tribological behavior of in situ synthesized Ti/Co coatings on Ti-6Al-4V alloy using laser surface cladding technique

S. Pityana, O. Adesina, A. Popoola, 2018 .

A STUDY ON SCAN SPEED RELATIONSHIP WITH MICROSTRUCTURAL EVOLUTION, PHASE COMPOSITION AND MICROHARDNESS OF Ni-CONTAINING INTERMETALLIC COATINGS ON Ti–6Al–4V USING LASER CLADDING TECHNIQUE

A. Popoola, O. Adesina, S. Pityana, 2017, Surface Review and Letters.

Microstructural and tribological behavior of in situ synthesized Ti/Co coatings on Ti-6Al-4V alloy using laser surface cladding technique

S. Pityana, D. Oloruntoba, A. Popoola, 2017, The International Journal of Advanced Manufacturing Technology.

DIRECT BIOLEACHING OF ZINC USING manihot esculenta crantz (cassava) EXTRACT WITHOUT ADDITIVES

P. Olubambi, O. Ajibola, D. Oloruntoba, 2020 .

Corrosion behavior of aluminium in alkaline-water hyacinth plant extract functionalized solution: an electrochemical and weight loss study

D. Oloruntoba, Ojo Friday Abraham, Aigbodion Victor Sunday, 2022, Chemical Data Collections.

Comparative analysis of air dried alchornea laxiflora leaves (AALL) extracted with different solvents on corrosion inhibition efficiency of mild steel in acidic media

L. Lajide, D. Oloruntoba, O. L. Adebayo, 2019 .

Effect of Processing Parameters on the Protective Quality of Electroless Nickel-Phosphorus on Cast Aluminium Alloy

B. O. Adewuyi, D. Oloruntoba, O. Ajibola, 2015 .

Powder metallurgy parameters for the optimization of nano-hybrid neodymium iron boron-based composite

A. Popoola, D. Oloruntoba, O. Oladijo, 2022, The International Journal of Advanced Manufacturing Technology.

INFLUENCE OF CEO2 ADDITION AND SCANNING SPEED ON MICROSTRUCTURE AND TRIBOLOGICAL BEHAVIOR OF LASER-CLAD Ti-Co REINFORCED COATINGS ON Ti-6Al-4V ALLOY

A. Popoola, G. A. Farotade, O. Adesina, 2020, Surface Review and Letters.

Microstructure and Corrosion Behavior of Laser Synthesized Cobalt Based Powder on Ti-6 Al-4 V

S. Pityana, A. Popoola, O. Adesina, 2018 .

Acid-acid function of Eichhornia crassipes roots as inhibitor for mild steel in 0.5 M H2SO4 solution

A. Popoola, B. L. Bayode, D. Oloruntoba, 2017, Protection of Metals and Physical Chemistry of Surfaces.

Effect of Preheat Treatment on Wear and Corrosion Rates of Copper Electrodeposition on Medium-Carbon Steel

O. Adesina, K. Akinluwade, D. Oloruntoba, 2020, Journal of Failure Analysis and Prevention.

Wear and Corrosion of Cast Al Alloy Piston with and without Brake Oil

D. Oloruntoba, O. Ajibola, 2015 .

Effects of polishing grades and Saccharin-550 additive on copper electroplating on NST60Mn and NST50-2 steels

D. Oloruntoba, O. Ajibola, 2014 .

Investigation on the Corrosion Performance of Nickel Electrodeposited Tempered Steel Substrate

D. Oloruntoba, I. M. Momoh, O. O. Olateju, 2012 .

Effect of zinc plating of low carbon steel on corrosion resistance in cassava fluid environment

O. Oluwole, O. Awheme, D. Oloruntoba, 2008 .

Effect of zinc plating of low carbon steel on corrosion resistance in cocoa fluid environment

O. Oluwole, O. Awheme, D. Oloruntoba, 2008 .

Effect of MgFeSi Inoculant on Properties of Cast 6061 Al Alloy for Brake Master Piston Application

D. Oloruntoba, O. Ajibola, 2015 .

Metallurgical study of cast aluminium alloy used in hydraulic brake calliper

B. O. Adewuyi, D. Oloruntoba, O. Ajibola, 2014 .

Comparative study of corrosion behaviour of galvanized steel and coated Al 3103 roofing sheets in carbonate and chloride environments

O. Oluwole, D. Oloruntoba, E. Oguntade, 2009 .

Microstructure and Corrosion Behavior of Laser Synthesized Cobalt Based Powder on Ti-6Al-4V

S. Pityana, O. Adesina, A. Popoola, 2018 .