D. He

发表

Effects of pre-treatments on mechanical properties and fracture mechanism of a nickel-based superalloy

Y. Lin, L. Li, Ming-Song Chen, 2017 .

A physically-based model considering dislocation–solute atom dynamic interactions for a nickel-based superalloy at intermediate temperatures

Y. Lin, Y. Lin, Jian Chen, 2019 .

Marginal-restraint mandrel-free spinning process for thin-walled ellipsoidal heads

Xin-he Li, D. He, Yong-Cheng Lin, 2020 .

Constitutive Model and Processing Maps for a Ti‐55511 Alloy in β Region

Y. Lin, N. Kotkunde, D. He, 2019, Advanced Engineering Materials.

Kinetics equations and microstructural evolution during metadynamic recrystallization in a nickel-based superalloy with δ phase

Y. Lin, L. Li, Ming-Song Chen, 2017 .

EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel-based superalloy during hot compressive deformation

Y. Lin, Xiao-Min Chen, Z. Long, 2016 .

Effects of pre-treatments on precipitate microstructures and creep-rupture behavior of an Al-Zn-Mg-Cu alloy

Y. Lin, Minghui Huang, Ming-Song Chen, 2016 .

Hot tensile properties, microstructure evolution and fracture mechanisms of Ti-6Al-4V alloy with initial coarse equiaxed phases

Y. Lin, Xiaoyong Zhang, N. Kotkunde, 2020 .

Hot tensile behavior of a 7046-aluminum alloy: fracture mechanisms and constitutive models

Y. Lin, Shiyong Chen, Cheng-bo Li, 2022, Materials Today Communications.

Microstructural Variation and a Physical Mechanism Model for a Ti-55511 Alloy during Double-Stage Hot Deformation with Stepped Strain Rates in the β Region

Gang Su, Zhou Li, Yongcheng Lin, 2021, Materials.

Hot Tensile Deformation Mechanism and Dynamic Softening Behavior of Ti–6Al–4V Alloy with Thick Lamellar Microstructures

Y. Lin, D. He, Guo-Dong Pang, 2020, Advanced Engineering Materials.

Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression

Y. Lin, Chao Chen, K. Zhou, 2019, Journal of Alloys and Compounds.

Effects of initial microstructures on hot tensile deformation behaviors and fracture characteristics of Ti-6Al-4V alloy

Y. C. Lin, C. Shuai, Y. Lin, 2018 .

A New Method to Increase the Spheroidization Rate of Lamellar α Microstructure during Hot Deformation of a Ti–6Al–4V Alloy

Y. Lin, Ming-Song Chen, D. He, 2020, Advanced Engineering Materials.

Microstructural Evolution and an Improved Dynamic Recrystallization Kinetic Model of a Ni-Cr-Mo Alloy in Hot Deformation

Y. Lin, D. He, Xintao Yan, 2022, Materials.

Microstructure Evolution and a Unified Constitutive Model of Ti-55511 Alloy Compressed at Stepped Strain Rates

Gang Su, Yongcheng Lin, Song Zhang, 2021, Materials.

Microstructural variations and kinetic behaviors during metadynamic recrystallization in a nickel base superalloy with pre-precipitated δ phase

Y. Lin, D. He, Li-hua Wang, 2019, Materials & Design.

Effect of pre-treatment on hot deformation behavior and processing map of an aged nickel-based superalloy

Y. Lin, Jian Chen, Xiao-Min Chen, 2015 .

Precipitation of Secondary Phase and Phase Transformation Behavior of a Solution‐Treated Ti–6Al–4V Alloy during High‐Temperature Aging

Y. Lin, Yi Tang, D. He, 2020, Advanced Engineering Materials.

A unified dislocation density-based model for an aged polycrystalline Ni-based superalloy considering the coupled effects of complicate deformation mechanisms and initial δ phase

Y. Lin, Ming-Song Chen, D. He, 2021, Materials Science and Engineering: A.

Influences of pre-precipitated δ phase on microstructures and hot compressive deformation features of a nickel-based superalloy

Y. Lin, Y. Lin, D. He, 2019, Vacuum.

Precipitation and dissolution behaviors of δ phase inside a deformed nickel-based superalloy during annealing treatment

Y. Lin, Ming-Song Chen, D. He, 2019, Applied Physics A.

Microstructural evolution and support vector regression model for an aged Ni-based superalloy during two-stage hot forming with stepped strain rates

Dong-Dong Chen, Yi Tang, Y. C. Lin, 2018, Materials & Design.

EBSD Study of Microstructural Evolution in a Nickel‐Base Superalloy during Two‐Pass Hot Compressive Deformation

Y. Lin, Yi Tang, Jian Huang, 2018 .

Effects of Stress‐Aging Pretreatment on Hot Deformation Behavior and Microstructure Evolution of a Ni–Cr–Nb–Mo–Ti Alloy

Hao Cheng, Yongcheng Lin, D. He, 2021, Advanced Engineering Materials.

Study of Flow Softening Mechanisms of a Nickel-Based Superalloy With Δ Phase

Y. Lin, Xiao-Min Chen, Ming-Song Chen, 2016 .

A new method to predict the metadynamic recrystallization behavior in a typical nickel-based superalloy

Y. Lin, Xiao-Min Chen, Ming-Song Chen, 2016 .

Influences of stress-aging on the precipitation behavior of δ phase (Ni3Nb) in a nickel-based superalloy

Y. Lin, Ming-Song Chen, D. He, 2021 .

Study on the structural transition and thermal properties of Ni3Nb-D022 phase: First-principles calculation

Y. Lin, D. He, Xing-You Jiang, 2018 .

Microstructural evolution and kinetic characteristics during metadynamic recrystallization in a Ni-Cr-Mo alloy

Y. Lin, D. He, Xintao Yan, 2022, Journal of Alloys and Compounds.

Effect of solution treatment on the strength and fracture toughness of aluminum alloy 7050

Ruirong Zhang, Xu-hu Zhang, Sheng-dan Liu, 2011 .

Investigation of the Annealing Effects on Mechanical Properties and Interfacial Characteristic of TA1/Al5083 Bimetal Composite

Zhou Li, Zhengyi Jiang, D. He, 2023, Journal of Materials Engineering and Performance.

Dissolution mechanisms and kinetics of δ phase in an aged Ni-based superalloy in hot deformation process

Y. Lin, D. He, L. Yin, 2018, Materials & Design.

Effects of Initial δ Phase on Creep Behaviors and Fracture Characteristics of a Nickel‐Based Superalloy

Y. Lin, Shuncun Luo, D. He, 2018 .

Effects of pressure on anisotropic elastic properties and minimum thermal conductivity of D022-Ni3Nb phase: First-principles calculations

Y. Lin, Ming-Song Chen, D. He, 2016 .

Influences of solution cooling on microstructures, mechanical properties and hot corrosion resistance of a nickel-based superalloy

Y. Lin, Jian Chen, L. Li, 2019, Materials Science and Engineering: A.

Effects of solution time and cooling rate on microstructures and mechanical properties of 2219 Al alloy for a larger spun thin-wall ellipsoidal head

Y. Lin, Xin-he Li, Dan-yang Liu, 2020 .

Creep Characteristics and Fracture Mechanisms of a Ni‐Based Superalloy with δ Phases at Intermediate Temperatures

Y. Lin, D. He, L. Yin, 2020, Advanced Engineering Materials.

Dislocation Substructures Evolution and an Informer Constitutive Model for a Ti-55511 Alloy in Two-Stages High-Temperature Forming with Variant Strain Rates in β Region

D. He, Yongcheng Lin, Shen Tan, 2023, Materials.

Microstructural evolution characteristics and a unified dislocation-density related constitutive model for a 7046 aluminum alloy during hot tensile

Y. Lin, Shipu Chen, D. He, 2023, Journal of Materials Research and Technology.

Microstructure evolution mechanisms and a physically-based constitutive model for an Al-Zn-Mg-Cu-Zr aluminum alloy during hot deformation

Y. Lin, Xin Yan, D. He, 2023, Journal of Materials Research and Technology.

A unified constitutive model and microstructure evolution of a solution treated 7075 aluminum alloys under warm forming condition

D. He, Zi-Jian Chen, Jia-Fu Wu, 2024, Journal of Materials Research and Technology.

Continuous dynamic recrystallization behaviors in a single-phase deformed Ti-55511 alloy by cellular automata model

Ming-Song Chen, D. He, Yu-Qiang Jiang, 2024, Journal of Alloys and Compounds.