S. Mitsuhiko

发表

Recent Advancement of Tyranno/SiC Composites R&D

A. Kohyama, Y. Katoh, T. Yamamura, 2008 .

Residual stresses in YAG phase of melt growth Al2O3/YAG eutectic composite estimated by indentation fracture test and finite element analysis

H. Okuda, J. Sha, Y. Waku, 2008 .

Temperature-Dependence of Mechanical Properties of Si-Ti-C-O Fiber-Bonded Ceramic

S. Mitsuhiko, T. Ishikawa, K. Matsunaga, 2001 .

Analytical modeling of stress-strain behavior at 1873 K of alumina/YAG composite compressed parallel and perpendicular to the solidification direction

Mototsugu Tanaka, M. Hojo, H. Okuda, 2007 .

Residual stresses in YAG phase in directionally solidified eutectic Al2O3/YAG ceramic composite estimated by X-ray diffraction

H. Okuda, J. Sha, Y. Waku, 2008 .

Fracture Toughness of a Crystalline Silicon Carbide Fiber (Tyranno‐SA3®)

Tadanobu Inoue, H. Okuda, K. Morishita, 2006 .

Residual strength of PIP-processed SiC/SiC single-tow minicomposite exposed at high temperatures in air as a function of exposure temperature and time

M. Hojo, H. Okuda, M. Tanaka, 2004 .

Preparation of High-Temperature Strength SiC Fiber

T. Seguchi, S. Kawanishi, S. Mitsuhiko, 1990 .

Fish assemblage structures on artificial sandy beaches in inner Tokyo Bay , central Japan

S. Mitsuhiko, A. Shigeru, S. Taro, 2019 .

In situ strain measurements of superconducting composites by depth and layer sensitive X-ray diffraction technique utilizing synchrotron radiation

H. Okuda, W. Prusseit, S. Mitsuhiko, 2011 .

Preparation and Properties of Dense SiC/SiC Composites

A. Kohyama, S. Mitsuhiko, Miyamoto Norifumi, 2008 .

Degradation of SiC/SiC composite due to exposure at high temperatures in vacuum in comparison with that in air

Kohei Morishita, Masaki Hojo, Shojiro Ochiai, 2004 .

Prediction of critical current-bending strain relation of Bi2223 composite tape using residual strain of filaments, load-strain curve and geometry of cross-section

M. Hojo, H. Okuda, M. Mimura, 2009 .

Estimation of Fracture Toughness of SiC Fiber and Statistical Analysis of Change in Fracture Strength Distribution with Notch Size

H. Okuda, K. Morishita, S. Mitsuhiko, 2013 .

Improvement of Young’s modulus and tensile strength of polymer impregnation and pyrolysis processed SiC/SiC composite by improved continuity of matrix

Mototsugu Tanaka, M. Hojo, H. Okuda, 2004 .

Tensile Fracture Behavior and Strength of Surface‐Modified SiTiCO Fiber SiC‐Matrix Minicomposites Fabricated by the PIP Process

Y. Kagawa, T. Yamamura, S. Mitsuhiko, 2004 .

Radiation Effects of Polycarbosilane as Precursor of Ceramic Fibers

T. Seguchi, S. Kawanishi, S. Mitsuhiko, 1988 .

Fabrication and Mechanical Property of Si-Ti-C-O fibre/Pyrex Composite

T. Yamamura, S. Mitsuhiko, Y. Harada, 1993 .