H. Inagaki

发表

Influence of Crystallographic Texture on the Strength and Toughness of the Controlled Rolled High Tensile Strength Steel

H. Inagaki, K. Kurihara, I. Kozasu, 1975 .

Rolling Textures in Aluminum Single Crystal Deviated by 5 Degrees about Rolling Direction from (001) (100) Orientation

K. Kashihara, H. Inagaki, 2007 .

Recent Progress and Related Problems in Texture Investigations ―Problems and Limitations in Taylor's Model―

H. Inagaki, 2005 .

Texture development in Al alloys during tensile testing

H. Inagaki, S. Ohtani, 2003, International Journal of Materials Research.

Nucleation of a {111} recrystallized grain at the grain boundary of cold rolled polycrystalline iron

H. Inagaki, 1987 .

Shape memory effect of Fe-14 % Mn- 6% Si-9 % Cr-6 % Ni alloiy polycrystals

H. Inagaki, 1992 .

Precipitation of the β-phase in Al-Mg alloys

H. Inagaki, 2005 .

Mechanism of Enhanced Superplasticity in Thermomechanically Processed Ti-6Al-4V / Mechanismen der Superplastizität in thermomechanisch behandelten Ti-6Al-4V-Legierungen

H. Inagaki, 1996 .

Enhanced Superplasticity in High Strength Ti Alloys

H. Inagaki, 1995 .

Effect of Cu on the Hydrogen Induced Cracking of the Pipe Line Steel

H. Inagaki, I. Matsushima, T. Nishimura, 1978 .

Rolling and recrystallization textures in Al-Mg alloys

H. Inagaki, Seiichi Endou, 2002 .

Grain Refinement of Ferrite-pearlite Structure of Low Carbon Steel through the Controlled Rolling Process

H. Inagaki, 1984 .

The Development of Rolling Textures in Low-Carbon Steels

H. Inagaki, T. Suda, 1972 .

The thermal depinning of dislocations

K. Lücke, H. Inagaki, F. Hultgren, 1970 .

Fundamental Aspect of Texture Formation in Low Carbon Steel.

Hirosuke Inagaki, H. Inagaki, 1994 .

Role of shear band in texture control of Al-Mg alloys

M. Koizumi, H. Inagaki, 1999 .

Fatigue Properties of High Strength Steel Sheets

T. Iwasaki, A. Katoh, M. Kurihara, 1982 .

Formation of {111} Recrystallization Texture in Polycrystalline Iron

H. Inagaki, 1984 .

Shear bands in high purity Al

A. Fujiwara, H. Inagaki, T. Kamijo, 1991 .

Contribution of dislocation substructures developed during cold rolling to the formation of rolling textures in Al-Mg alloys

H. Inagaki, Seiichi Endou, 2003 .

Development of Annealing Textures in Al–Mg Alloys

M. Koizumi, H. Inagaki, Hironobu Okudaira, 1998 .

Shear Bands In Cold Rolled Al–Mg Alloy Polycrystals

H. Inagaki, S. Kohara, 1997 .

Rolling and Recrystallization Textures in High Purity Al–Mg Alloys

M. Koizumi, H. Inagaki, S. Kohara, 1997 .

Rolling and Recrystallization Textures in High Purity Al Cold Rolled to Very High Rolling Reductions

H. Inagaki, Atsushi Todayama, 2005 .

Cracking of Cementite Particles and its Influences on the Development of the Rolling Texture in Low Carbon Steels

H. Inagaki, 1987 .

Texture and Mechanical Anısotropy in Cold Rolled and Annealed Pure Ti Sheets

H. Inagaki, 1992 .

Shape Memory Effect of Fe-14 % Mn-6% S-9% Cr-6% Ni Alloy Polycrystals

H. Inagaki, 1992 .

Transmission Electron Microscopy of the Shape Memory Phenomena in Fe-14 % Mn-6 % Si-9 % Cr-6 % Ni Alloy Polycrystals

H. Inagaki, 1992 .

Orientation Imaging Microscopy of the Shear Bands Formed in Al-5%Mg Alloys during Cold Rolling

C. Chang, B. Duggan, M. Koizumi, 2002 .

Formation of cube recrystallized grains in high-purity Al

A. Umezawa, H. Inagaki, 2006, International Journal of Materials Research.

Development of cube recrystallization textures in high-purity Al

A. Umezawa, H. Inagaki, 2006, International Journal of Materials Research.

Effect of constraint on development of rolling texture in pure aluminum single crystal having cube orientation

K. Kashihara, H. Inagaki, 2006 .

Nucleation and growth of cube-oriented recrystallized grains in an aluminum single crystal of an s-orientation

H. Inagaki, T. Kamijo, S. Kataoka, 1993 .

Microstructures and textures in hot-rolled sheets of high purity aluminum for electrolytic capacitor.

H. Inagaki, Seiichi Endou, 2002 .

Rolling Textures in Al-Mg Alloys

M. Koizumi, H. Inagaki, S. Kohara, 2000, International Journal of Materials Research.

Contribution of dislocation substructures developed during cold rolling to the formation of rolling textures in Al–Mg alloys

H. Inagaki, Seiichi Endou, 2003, International Journal of Materials Research.

Role of Annealing Twins for Grain Refinement in Controlled Rolling of Low Carbon Microalloyed Steel

H. Inagaki, 1983 .

Formation of {111} Recrystallization Textures in Polycrystalline Iron

H. Inagaki, 1976 .