R. Tolouei

发表

Dependence of the Fracture Toughness on the Sintering Time of Dense Hydroxyapatite Bioceramics

S. Ramesh, I. Sopyan, W. Teng, 2011 .

Sintering properties of hydroxyapatite powders prepared using different methods

S. Ramesh, M. Hamdi, W. Teng, 2013 .

Sintering behavior of hydroxyapatite prepared from different routes

S. Ramesh, I. Sopyan, W. Teng, 2012 .

Effects of Powder Synthesis Method on the Sinterability of Hydroxyapatite

W. H. Yeo, I. Sopyan, W. Teng, 2011 .

Enhancing the functionality of cotton fabric by physical and chemical pre-treatments: A comparative study.

D. Mantovani, P. Chevallier, N. Ladhari, 2016, Carbohydrate polymers.

Thermal treatment and properties of bovine hydroxyapatite

A. Niakan, M. Hamdi, Chou Yong Tan, 2014 .

Manufacturing of High Toughness Hydroxyapatite Produced by Wet Chemical Method

S. Ramesh, M. Satgunam, Chou Yong Tan, 2011 .

Synthesis, mechanical properties and corrosion behavior of powder metallurgy processed Fe/Mg2Si composites for biodegradable implant applications.

M. Vedani, R. Casati, D. Mantovani, 2017, Materials science & engineering. C, Materials for biological applications.

Laser surface structuring affects polymer deposition, coating homogeneity, and degradation rate of Mg alloys

B. Previtali, V. Furlan, A. Demir, 2015 .

Sol-Gel Synthesis of FHA Nanoparticles and CDHA Agglomerates from a Mixture with a Nonstochiometric Ca/P Ratio

A. Youzbashi, A. Behnamghader, R. Jahandideh, 2008 .

Sintering properties and thermal depletion of boron in zirconia–zirconium diboride conductive ceramic

S. Ramesh, D. Agrawal, W. Teng, 2014 .

Influence of cross-rolling on the micro-texture and biodegradation of pure iron as biodegradable material for medical implants.

B. A. Okorie, D. Mantovani, C. Paternoster, 2015, Acta biomaterialia.

Densification behaviour and properties of manganese oxide doped Y-TZP ceramics

S. Ramesh, M. Hamdi, W. Teng, 2011 .

Effect of grain sizes on mechanical properties and biodegradation behavior of pure iron for cardiovascular stent application

B. A. Okorie, D. Mantovani, C. Paternoster, 2014, Biomatter.

In vitro degradation behavior of Fe-20 Mn-1.2C alloy in three different pseudo-physiological solutions.

F. Prima, D. Mantovani, P. Chevallier, 2016, Materials science & engineering. C, Materials for biological applications.

Effects of bismuth oxide on the sinterability of hydroxyapatite

S. Ramesh, I. Sopyan, W. Teng, 2011 .

On the long term antibacterial features of silver-doped diamondlike carbon coatings deposited via a hybrid plasma process.

M. Tatoulian, D. Mantovani, S. Turgeon, 2014, Biointerphases.

Low-Temperature Degradation (LTD) Behaviour of CuO-Doped Tetragonal Zirconia Ceramic

F. Tarlochan, S. Ramesh, I. Sopyan, 2012 .

Sinterability and Mechanical Properties of MnO2-Doped Y-TZP: The Effects of Holding Time Variations

S. Ramesh, M. Satgunam, S. Sivakumar, 2011 .

Synthesis of High Fracture Toughness of Hydroxyapatite Bioceramics

I. Sopyan, W. Teng, R. Tolouei, 2011 .

Sintering studies of synthesised manganese-oxide-doped calcium phosphate via wet chemical precipitation method

S. Ramesh, A. Muchtar, B. Yap, 2014 .

Fabrication and In-vivo Evaluation of BCP Scaffolds

A. Behnamghader, D. Sharifi, R. Tolouei, 2011 .

Surface oxidation by laser soft-melting treatment to change degradation behaviour of a magnesium alloy

A. Demir, B. Previtali, V. Furlan, 2016 .

Sintering behaviour of forsterite bioceramics

S. Ramesh, M. Amiriyan, S. Ramesh, 2011, 2011 National Postgraduate Conference.

Effects of Ramp Rates with Short Holding Time on the Sinterability of Hydroxyapatite

B. Yap, R. Tolouei, M. Amiriyan, 2012 .

Sintering Behavior of Nanocrystalline Hydroxyapatite Produced by Wet Chemical Method

S. Ramesh, M. Hamdi, W. Teng, 2011 .

Pressureless Sintering of Electro-Conductive Zirconia Composites

S. Ramesh, I. Sopyan, W. Teng, 2011 .

CO2-rich atmosphere strongly affects the degradation of Fe-21Mn-1C for biodegradable metallic implants

C. Biffi, A. Tuissi, D. Mantovani, 2016 .

Sintering effects on the densification of nanocrystalline hydroxyapatite

S. Ramesh, W. Teng, R. Tolouei, 2011 .

Calcination Effects on the Sinterability of Hydroxyapatite Bioceramics

S. Ramesh, B. Yap, R. Tolouei, 2011 .

Manufacturing Porous BCP Body by Negative Polymer Replica as a Bone Tissue Engineering Scaffold

M. Daliri, A. Behnamghader, R. Tolouei, 2009 .

Sintered Properties of Y-TZP/ZrB2 Ceramics

W. Teng, R. Tolouei, M. Amiriyan, 2013 .

Mechanical and Electrical Properties of Y-TZP/ZrB2 Composite

I. Sopyan, A. Hossain, R. Tolouei, 2012 .

Mutant huntingtin is present in neuronal grafts in huntington disease patients

Diego Mantovani, Steve Lacroix, Jeremy N Skepper, 2014, Annals of neurology.

The use of multiple pseudo-physiological solutions to simulate the degradation behavior of pure iron as a metallic resorbable implant: a surface-characterization study.

D. Mantovani, P. Chevallier, C. Paternoster, 2016, Physical chemistry chemical physics : PCCP.

Effect of Nano Silica on the Sinterability of Hydroxyapatite Dense Bodies

I. Sopyan, W. Teng, R. Tolouei, 2011 .

Effect of electrolyte composition and deposition current for Fe/Fe-P electroformed bilayers for biodegradable metallic medical applications.

D. Mantovani, E. Ghali, D. Dubé, 2017, Materials science & engineering. C, Materials for biological applications.

Surface modification of L605 by oxygen plasma immersion ion implantation for biomedical applications

G. Barucca, D. Mantovani, C. Paternoster, 2018, MRS Communications.

Laser surface texturing of SS316L for enhanced adhesion of HUVECs

A. Demir, B. Previtali, V. Furlan, 2018, Surface Engineering.

SINTERING AND MECHANICAL PROPERTIES OF MgO-DOPED HYDROXYAPATITE BIOCERAMICS

S. Ramesh, Jalan Ikram-Uniten, B. Yap, 2011 .

The use of multiple pseudo-physiological solutions to simulate the degradation behavior of pure iron as a metallic resorbable implant: a surface-characterization study.

D. Mantovani, P. Chevallier, C. Paternoster, 2016, Physical chemistry chemical physics : PCCP.