N. Rohbeck

发表

Effects of thermal treatment on the mechanical integrity of silicon carbide in HTR fuel up to 2200 C

P. Xiao, N. Rohbeck, 2014 .

An Original Way to Investigate Silver Migration Through Silicon Carbide Coating in TRISO Particles

P. Xiao, Fan Yang, Xin Geng, 2014 .

Mechanics of Nanoscale ε-Fe2O3/Organic Superlattices toward Flexible Thin-Film Magnets

J. Michler, M. Karppinen, I. Utke, 2021 .

Molecular layer deposited alucone thin films from long-chain organic precursors: from brittle to ductile mechanical characteristics.

J. Michler, I. Utke, J. Niemelä, 2020, Dalton transactions.

Combinatorial Study of Phase Composition, Microstructure and Mechanical Behavior of Co-Cr-Fe-Ni Nanocrystalline Film Processed by Multiple-Beam-Sputtering Physical Vapor Deposition

J. Michler, P. Nagy, J. Gubicza, 2022, Materials.

Microstructure, Hardness, and Elastic Modulus of a Multibeam-Sputtered Nanocrystalline Co-Cr-Fe-Ni Compositional Complex Alloy Film

J. Michler, P. Nagy, J. Gubicza, 2021, Materials.

Processing and characterization of a multibeam sputtered nanocrystalline CoCrFeNi high-entropy alloy film

J. Michler, P. Nagy, J. Gubicza, 2020, Surface and Coatings Technology.

In-situ nanoindentation of irradiated silicon carbide in TRISO particle fuel up to 500 °C

P. Xiao, J. Escleine, I. Shapiro, 2015 .

Stability of mechanical properties of molecular layer–deposited alucone

J. Michler, I. Utke, C. Kapusta, 2018, Materials Today Chemistry.

Mechanical properties and XRD studies of silicon carbide inert matrix fuel fabricated by a low temperature polymer precursor route

C. Shih, R. Baney, J. Tulenko, 2013 .

Degradation of ytterbium disilicate environmental barrier coatings in high temperature steam atmosphere

P. Xiao, N. Rohbeck, P. Morrell, 2019, Journal of the European Ceramic Society.

Comparison of the oxidation behavior of a zirconium nitride coating in water vapor and air at high temperature

P. Xiao, Ying Chen, P. Kelly, 2018, Corrosion Science.

Effects of water vapor on the oxidation and the fracture strength of SiC layer in TRISO fuel particles

P. Xiao, Xin Wang, Xiaofeng Zhao, 2017 .

Thermally Stable Nanotwins: New Heights for Cu Mechanics

T. Edwards, J. Michler, B. Putz, 2022, Advanced science.

Effect of high strain rates and temperature on the micromechanical properties of 3D-printed polymer structures made by two-photon lithography

T. Edwards, J. Michler, L. Philippe, 2020, Materials & Design.

A Study of Reaction between Palladium, Palladium Silver Alloy and Silicon Carbide Ceramics at High Temperature

Zhaohe Gao, N. Rohbeck, Ping Xiao, 2023, Journal of the European Ceramic Society.

Comparison study of silicon carbide coatings produced at different deposition conditions with use of high temperature nanoindentation

P. Xiao, J. Escleine, Bing Liu, 2016, Journal of Materials Science.

Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: A case study on GaAs single crystals

J. Michler, X. Maeder, N. Rohbeck, 2020, Materials & Design.

Evaluation of the mechanical performance of silicon carbide in TRISO fuel at high temperatures

P. Xiao, N. Rohbeck, 2016 .

Nanoscale 3D Electroforming by Template Pyrolysis

J. Michler, L. Philippe, Christopher G Gunderson, 2021, Advanced Engineering Materials.

Interfacial fracture behavior and adhesive strength in tensile and shear loading of SiC-PyC-SiC composites by micro-scale specimens

J. Michler, P. Herre, D. Casari, 2023, Acta Materialia.

The impact of co-deposited silicon impurity on oxidation of silicon carbide coatings in the air and in steam at high temperatures

Zhaohe Gao, N. Rohbeck, Ying Chen, 2023, Corrosion Science.