K. Kamata

发表

Additional Bias Effects on the Formation of Amorphous Hydrogenated Carbon Films by ECR

Tohru Inoue, K. Maruyama, K. Kamata, 1990 .

Nonstoichiometric behavior and phase stability of rare earth manganites at 1200°C: (1). LaMnO3

Tetsuro Nakamura, T. Nakajima, K. Kamata, 1978 .

Microstructure and Optical Properties of Hot Isostatically Pressed Nd:YAG Ceramics

A. Ikesue, K. Kamata, 1996 .

Strengthening of glass by amorphous SiNxCy ceramic films

K. Kamata, M. Moriyama, 1987 .

Role of Si on Nd Solid-Solution of YAG Ceramics

A. Ikesue, K. Kamata, 1995 .

Synthesis of Nd3+,Cr3+‐codoped YAG Ceramics for High‐Efficiency Solid‐State Lasers

Kunio Yoshida, A. Ikesue, K. Kamata, 1995 .

Microhardness and internal stress of Si3N4-SiC films prepared by plasma CVD

K. Kamata, N. Aizawa, M. Moriyama, 1986 .

High strength, electrically conductive pore-free TiO_2 ceramics made by hot isostatic pressing

H. Saitoh, K. Uematsu, Y. Kishi, 1997 .

Physical properties of diamondlike carbon films deposited in mixed atmospheres of C2H4–Ar, C2H4–H2, and C2H4–N2

Hideo Kato, Yasuyuki Yamamoto, M. Nakayama, 1996 .

Synthesis of Transparent Nd-doped HfO2-Y2O3 Ceramics Using HIP

Kunio Yoshida, A. Ikesue, K. Kamata, 1996 .

Mechanical properties of SiNxCx ceramic films prepared by plasma CVD

K. Kamata, I. Tanabe, M. Moriyama, 1991, Journal of Materials Science.

Hybridization between Si3N4 and SiC films by plasma CVD

K. Kamata, M. Moriyama, Y. Maeda, 1986 .

Vacuum ultraviolet, ultraviolet and visible absorption spectra study of hydrogenated amorphous carbon films prepared by RF plasma chemical vapour deposition

M. Nakayama, K. Kamata, K. Maruyama, 1993 .

SYNTHESIS OF ZINC OXIDE POWDER BY HYDROLYSIS OF BIS(ACETYLACETONATO)ZINC(II) IN AQUEOUS SOLUTION

Yuji Maeda, K. Kamata, K. Miyokawa, 1984 .

Preparation of Zinc Oxide Films by Low-Pressure Chemical Vapor Deposition Method

S. Ohshio, K. Kamata, J. Nishino, 1994 .

Preparation of Aluminum‐Doped Zinc Oxide Films by a Normal‐Pressure CVD Method

S. Ohshio, K. Kamata, J. Nishino, 1992 .

Rapid formation of zinc oxide films by an atmospheric-pressure chemical vapor deposition method

S. Ohshio, K. Maruyama, K. Kamata, 1994 .

Fabrication of Polycrystal line, Transparent YAG Ceramics by a Solid‐State Reaction Method

Akio Ikesue, Kiichiro Kamata, A. Ikesue, 1995 .

Valence stability of molybdenum in alkaline earth molybdates

Tetsuro Nakamura, K. Kamata, T. Sata, 1975 .

SYNTHESIS AND PROPERTIES OF THE METALLIC MOLYBDATE(IV) CaMoO3

Tetsuro Nakamura, K. Kamata, T. Sata, 1975 .

Transparent Cr4+‐Doped YAG Ceramics for Tunable Lasers

Kunio Yoshida, A. Ikesue, K. Kamata, 1996 .

Fabrication and Optical Properties of High‐Performance Polycrystalline Nd:YAG Ceramics for Solid‐State Lasers

Akio Ikesue, Kunio Yoshida, Kiichiro Kamata, 1995 .

Fabrication and Optical Properties of High‐Performance Polycrystalline Nd:YAG Ceramics for Solid‐State Lasers.

Akio Ikesue, Kunio Yoshida, Kiichiro Kamata, 1995 .

Synthesis of a new perovskite Pb(Li14Nb34)O3

S. Udagawa, K. Kamata, Shigemitsu Shin, 1973 .

Effects of Neodymium Concentration on Optical Characteristics of Polycrystalline Nd:YAG Laser Materials

Akio Ikesue, Kunio Yoshida, Kiichiro Kamata, 1996 .

Fabrication of Polycrystalline, Transparent YAG Ceramics by a Solid- State Reaction Method.

Akio Ikesue, Kiichiro Kamata, A. Ikesue, 1996 .

Mechanical and Electrical Properties of Pressureless Sintered TiN-TiB2 System

K. Kamata, M. Moriyama, H. Aoki, 1995 .

SYNTHESIS AND PROPERTIES OF ORDERED PEROVSKITES A2(Ln3+M5+)O6 (A=Ba, Sr, Ln=Y, Gd, Dy, Er, M=Mo, W)

Tetsuro Nakamura, M. Yoshimura, K. Kamata, 1972 .

The Mechanical Properties of Hot-Pressed TiN Ceramics with Various Additives

Yoshikazu Kobayashi, K. Kamata, M. Moriyama, 1993 .

Formation of Carbon Films from C2H6–H2 by ECR Plasma CVD by Application of a Negative DC Bias

Masaki Yamamoto, K. Kuchitsu, K. Maruyama, 1993 .

Emission Spectra and Morphology of Carbon Films by ECR Plasma CVD

Tohru Inoue, K. Maruyama, K. Kamata, 1991 .

Effect of negative dc bias voltage on mechanical property of a‐C:H films deposited in electron cyclotron resonance plasma

H. Saitoh, Tohru Inoue, K. Maruyama, 1995 .

Thermogravimetric study of rare earth manganites AMnO3 (A=Sm,Dy,Y,Er,Yb) at 1200°C

Tetsuro Nakamura, T. Nakajima, K. Kamata, 1979 .

Preparation of Submicrometer A12O3 Powder by Gas‐Phase Oxidation of Tris (acetylacetonato) aluminum (111)

A. Yamada, K. Kamata, K. Miyokawa, 1985 .

Rapid formation of TiO2 films by a conventional CVD method

Kazunori Maruyama, Kiichiro Kamata, Hiroyuki Fukazawa, 1990 .

Preparation of Submicrometer Al2O3Powder by Gas-Phase Oxidation of Tris(acetylacetonato)aluminum(III).

Kikuo Miyokawa, Kiichiro Kamata, T. Mochizuki, 1985 .

Electrical Properties of Indium Oxide Films in the Presence of Hydrogen and Ethanol Gasses

H. Saitoh, S. Ohshio, Ming Zhang, 2003 .

Electrical Properties of Palladium-Coated Indium Oxide Films for Gas Detection

H. Saitoh, S. Ohshio, Ming Zhang, 2003 .

Positive and negative direct current bias effects on the microstructures and physical properties of hydrogenated amorphous carbon films prepared by radio frequency plasma chemical vapor deposition

M. Nakayama, K. Maruyama, K. Kamata, 1995 .

Damage structures in Si3N4–Sic films and stainless steel irradiated by intense pulsed light-ion beam

K. Yatsui, M. Kanno, K. Kamata, 1987 .

Surface characterization of carbon surfaces by cold plasma treatment

A. Kojima, T. Ohte, M. Katoh, 1994 .

Tin Dioxide Films Prepared by a Rapid Chemical Vapor Deposition Method

H. Saitoh, S. Ohshio, K. Kamata, 1994 .

Preparation of nitrogen containing carbon films using chemical vapor deposition enhanced by electron cyclotron resonance plasma

H. Saitoh, S. Ohshio, Tohru Inoue, 1995 .

Fabrication of Transparent Ce:Y2O3 Ceramics Using a HIP

A. Ikesue, K. Kamata, 1995 .

Conductive indium-doped zinc oxide films prepared by atmospheric-pressure chemical vapour deposition

S. Ohshio, K. Kamata, J. Nishino, 1997 .