R. Guillén

发表

Approximate Analytical Formulae to Evaluate the Uncertainty in X-Ray Stress Analysis

M. François, C. Ferreira, R. Guillén, 2005 .

X-ray measurement of residual stresses and texture development during a rolling sequence of zirconium alloy cladding tubes – influence of plastic anisotropy on mechanical behaviour

J. Fajoui, D. Gloaguen, R. Guillén, 2010 .

Measurement and prediction of residual stresses and crystallographic texture development in rolled Zircaloy-4 plates: X-ray diffraction and the self-consistent model

D. Gloaguen, R. Guillén, E. Girard, 2007 .

Mesoscopic residual stresses of plastic origin in zirconium: interpretation of X-ray diffraction results

M. François, M. François, D. Gloaguen, 2004 .

Extension of Mori-Tanaka Approach to Hygroelastic Loading of Fiber-reinforced Composites - Comparison with Eshelby-Kroner Self-consistent Model

F. Jacquemin, R. Guillén, S. Fréour, 2006 .

Prediction of local hygroscopic stresses for composite structures – Analytical and numerical micro-mechanical approaches

S. Fréour, F. Jacquemin, R. Guillén, 2009 .

Numerical and Analytical Scale-Transition Prediction of Hygro-Mechanical Stresses in Multidirectional Carbon-Epoxy Laminates

S. Fréour, F. Jacquemin, R. Guillén, 2006 .

Application of inverse models and XRD analysis to the determination of Ti-17 β-phase coefficients of thermal expansion

M. François, S. Fréour, D. Gloaguen, 2006 .

Modelling and simulation of multi‐phase effects on X‐ray elasticity constants

M. François, S. Fréour, D. Gloaguen, 2003 .

Micromechanical modelling of the elastoplastic behaviour of metallic material under strain-path changes

J. Fajoui, D. Gloaguen, R. Guillén, 2009 .

Determining Ti-17 β-Phase Single-Crystal Elasticity Constants through X-Ray Diffraction and Inverse Scale Transition Model

M. François, S. Fréour, E. Lacoste, 2011 .

Multiscale hygroviscoelastic approach to predicting the internal stresses in composite materials

F. Jacquemin, D. Gloaguen, R. Guillén, 2010 .

Measurement and Interpretation of Residual Stresses Induced in Ti-17 by Machining Conditions

S. Fréour, R. Guillén, E. Girard, 2006 .

Determination of single‐crystal elasticity constants in a cubic phase within a multiphase alloy: X‐ray diffraction measurements and inverse‐scale transition modelling

M. François, S. Fréour, M. François, 2005 .

A multiscale analysis of the mechanical behavior of a thermo-oxidized c/epoxy lamina

S. Fréour, F. Jacquemin, M. Rahmani, 2010 .

A study of the mechanical behavior of thermo-oxidized composite lamina

A. Yousfi, S. Fréour, F. Jacquemin, 2008 .

Improvement of mechanical properties of hydroxyapatite composites reinforced with i-Al64Cu23Fe13 quasicrystal

F. Rumiche, A. Champi, M. Moya, 2020 .

Evolution of internal stresses in rolled Zr702α

M. François, D. Gloaguen, J. Royer, 2002 .

Numerical Study of the Influence of Dislocation Microstructure on Metallic Materials Mechanical Behaviour

J. Fajoui, R. Guillén, B. Courant, 2006 .

A Hygroelastic Self-consistent Model for Fiber-reinforced Composites

F. Jacquemin, R. Guillén, S. Fréour, 2005 .

Hygro-elastic Internal Stresses in Porous Composite Materials: A Multi-scale Analysis

F. Jacquemin, D. Gloaguen, R. Guillén, 2007 .

Hygro-elastic Internal Stresses in Porous Composite Materials: A Multi-scale Analysis

F. Jacquemin, D. Gloaguen, R. Guillén, 2007 .

Direct Laser Fabrication process with coaxial powder projection of 316L steel. Geometrical characteristics and microstructure characterization of wall structures

Ronald Guillén, Jean-Yves Hascoet, Samuel Branchu, 2012 .

Analysis and prediction of single laser tracks geometrical characteristics in coaxial laser cladding process

Ronald Guillén, Jean-Yves Hascoet, Samuel Branchu, 2012 .

On the use of the geometric mean approximation in estimating the effective hygro-elastic behavior of fiber-reinforced composites

S. Fréour, F. Jacquemin, R. Guillén, 2007 .

comparison between simplified models and experimental results

M. François, S. Fréour, D. Gloaguen, 2004 .

Prediction and analytical description of the single laser track geometry in direct laser fabrication from process parameters and energy balance reasoning

Jean-Yves Hascoët, Ronald Guillén, Bruno Courant, 2012 .

Examination of residual stresses and texture in zirconium alloy cladding tubes after a large plastic deformation: experimental and numerical study

D. Gloaguen, R. Guillén, E. Girard, 2008 .

Development of Intergranular Stresses in Zirconium Alloy Cladding Tubes: Experimental and Numerical Studies

D. Gloaguen, R. Guillén, E. Girard, 2006 .

Effect of plastic shearing on damage and texture on Zircaloy-4 cladding tubes: experimental and numerical study

P. Weisbecker, M. François, R. Guillén, 2001 .

Effects of Temperature Fluctuations on X-Ray Stress Determination

M. François, C. Ferreira, R. Guillén, 2005 .

Homogenization of Moisture Diffusing Behavior of Composite Materials with Impermeable or Permeable Fibers — Application to Porous Composite Materials

F. Jacquemin, M. Rahmani, K. Loucif, 2009 .

Analytical modeling of transient hygro-elastic stress concentration : Application to embedded optical fiber in a non-uniform transient strain field

S. Fréour, F. Jacquemin, R. Guillén, 2006 .

X-ray diffraction texture analysis of cylindrical samples

M. François, R. Guillén, C. Cossú, 1999 .

Determination of the Macroscopic Elastic Constants of a Phase Embedded in a Multiphase Polycrystal-Application to the β-Phase of a Ti-17 Titanium Based Alloy

M. François, S. Fréour, D. Gloaguen, 2002 .